Adventure Force Delta Pro Buffertube/NPX Spring Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Give your Delta Pro a boost with Nexus Pro X Springs.
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 23
- Makes
- 1
- Views
- 291
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Performance (Dart Zone Springs)
Low Power NPX Spring: Light prime ~110 FPS
Stock NPX Spring: Stiff prime ~150 FPS
High Power NPX Spring: Very stiff prime ~180 FPS.
*I do not have a chrono so these FPS numbers are rough estimates compared to other blasters*
Hardware
6 x M3 Hex Nut
4 x M3 Screws (Countersunk Head)
*Warning. This puts precompression on untrimmed NPX springs. I highly recommend removing full length springs when not in use. There is a small window in the buffertube that allows you to view if there is a spring inside*
Assembly
1. Stack two M3 hex nuts together and thread onto the end of a screw.
2. Use the screw as a guide to hammer the hex nuts into the cutout in the blaster.
3. Once in place, remove the guide screw and repeat on the other side.
The rest of the assembly should be easy to reference to the photos but if you have any questions or need something adjusted, just message me!
Filament
Elegoo PLA Plus (Orange and White) https://us.elegoo.com/products/elegoo-pla-plus-3d-printer-filament-1-75mm-colored-1kg