Guide for Festool OF 1010 EBQ-Plus router, for deepening existing tracks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Specifically designed for refurbishing the deck on a sailboat
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 532
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
This attachment for the Festool OF 1010 EBQ-Plus router helps keep the router aligned, when deepening an existing track, eg. the one in the wooden deck on a sailboat, where rubber is normally applied. When refurbishing a deck, you might need to deepen the groove, to be able to fit a little more rubber and allow the whole thing to be sanded afterwards.
The STL files included are designed for 5mm wide tracks
guide.stl is for the long straight runs, with a guide piece for the track both in front and behind the router bit.
guide_end.stl only have the guide behind and a larger opening, for you to slowly creep up to the end without overshooting.
The supplied OpenSCAD file allows for modifying the track width.