1 / 2
Guide for Festool OF 1010 EBQ-Plus router, for deepening existing tracks — image 1
1 / 2

Guide for Festool OF 1010 EBQ-Plus router, for deepening existing tracks

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Specifically designed for refurbishing the deck on a sailboat

Rating
0 / 5
Likes
5
Downloads
26
Makes
0
Views
532
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Share Alike

This attachment for the Festool OF 1010 EBQ-Plus router helps keep the router aligned, when deepening an existing track, eg. the one in the wooden deck on a sailboat, where rubber is normally applied. When refurbishing a deck, you might need to deepen the groove, to be able to fit a little more rubber and allow the whole thing to be sanded afterwards.

The STL files included are designed for 5mm wide tracks

guide.stl is for the long straight runs, with a guide piece for the track both in front and behind the router bit.

guide_end.stl only have the guide behind and a larger opening, for you to slowly creep up to the end without overshooting.

The supplied OpenSCAD file allows for modifying the track width.

Tags