Lockers / Wardrobe Kit Card & single parts - 1:24 scale garage diorama accessories
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print changing room lockers for your workshop, garage or diorama. No supports needed - fully scalable.
- Ocena
- 0 / 5
- Polubienia
- 148
- Pobrania
- 715
- Wydruki
- 0
- Wyświetlenia
- 1553
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Summary
This is a 1:24 scale model of lockers in a kit card style.
Versions
The kit card is available in a 3MF file for a one-color print.
The individual lockers are available as separate files.
Print
Print with 0.16 layer hight or lower to bring up the details.
No supports are needed.
Use 3 perimeters and 10% infill.
Post processing
The small struts can be removed really quickly and cleanly using a side cutter.
Dimensions at 100% scale (1:24)
The fully assembled model has the following dimensions
Height: 75mm
Depth: 17.6mm
Width: 16.6mm (single) - 31.1mm (double)
The kit card has the following dimensions when printed
Height: 17.6mm
Depth: 85mm
Width: 82mm
Scaling is possible completely and without any limitations.
Calculation formula using the example of target scale 1:18:
24 / [18] * 100 = 133% scale in your slicer
Other models
I will also try to publish other car related garage / diorama models. Stay tuned!
I hope you had as much fun printing and assembling it as I did :-)
Do you like my work? I would be very happy if you would support my work on Ko-fi.