1 / 2
Lone Star Grillz Pellet Smoker FireBoard Cover — zdjęcie 1
1 / 2

Lone Star Grillz Pellet Smoker FireBoard Cover

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Magnetic FireBoard cover with removable front for a Lone Star Grillz pellet smoker.

Ocena
0 / 5
Polubienia
4
Pobrania
31
Wydruki
0
Wyświetlenia
408
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

The cover I have built is a three part print. I used black PETG for the sides/top and frame. I used clear PETG for the front. I did not use any supports and printed with a .20mm quality. 

For the frame, there are 7 cut outs for some bar magnets. I put mine in with a little clear Gorilla glue. The cut outs are sized for 60mmx10mmx3mm bar magnets. Once the magnets were in and the glue was dry I added a 1/32" thick strip of rubber to seal off the magnets and to help it be a bit more waterproof. On the other side of the frame there is a channel for the top and sides to snap into. It is tight but does work. 

Top and Sides - I did not print with a brim or anything. May need to use a knife to trim down the edge you plan to stick into the frame. On the top portion there are 5 cut outs for small round magnets. These are what the front cover sticks to. I did not glue these in, they fit tight with friction. I got the magnet in position then used an adjustable pliers to snap them into place. 

Front cover - There are 7 cut outs for small round magnets. I used the same approach for getting these in as I did for the top and sides. 

https://www.amazon.com/gp/product/B081W5P4GD/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

https://www.amazon.com/gp/product/B09XK9ZMVQ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

https://www.amazon.com/gp/product/B0CLXZPMT4/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1