Lone Star Grillz Pellet Smoker FireBoard Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Magnetic FireBoard cover with removable front for a Lone Star Grillz pellet smoker.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 31
- Makes
- 0
- Views
- 408
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Public Domain
The cover I have built is a three part print. I used black PETG for the sides/top and frame. I used clear PETG for the front. I did not use any supports and printed with a .20mm quality.
For the frame, there are 7 cut outs for some bar magnets. I put mine in with a little clear Gorilla glue. The cut outs are sized for 60mmx10mmx3mm bar magnets. Once the magnets were in and the glue was dry I added a 1/32" thick strip of rubber to seal off the magnets and to help it be a bit more waterproof. On the other side of the frame there is a channel for the top and sides to snap into. It is tight but does work.
Top and Sides - I did not print with a brim or anything. May need to use a knife to trim down the edge you plan to stick into the frame. On the top portion there are 5 cut outs for small round magnets. These are what the front cover sticks to. I did not glue these in, they fit tight with friction. I got the magnet in position then used an adjustable pliers to snap them into place.
Front cover - There are 7 cut outs for small round magnets. I used the same approach for getting these in as I did for the top and sides.
https://www.amazon.com/gp/product/B081W5P4GD/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B09XK9ZMVQ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B0CLXZPMT4/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1