Air Compressor Kit Card - 1:24 scale garage diorama accessories
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print this must-have accessory for your diorama workshop or garage! No supports needed.
- Ocena
- 0 / 5
- Polubienia
- 231
- Pobrania
- 1271
- Wydruki
- 2
- Wyświetlenia
- 2684
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Summary
This is a 1:24 scale model of a workshop air compressor in a kit card style.
Versions
The complete set is available in a 3MF file for a one-color print.
There is a 3MF-file with predefined colors intended for users of AMS or MMU.
Print
Print with 0.12 layer hight or lower to bring up the details.
No supports are needed.
Use 3 perimeters and 15% infill.
Post processing
The small struts can be removed really quickly and cleanly using a side cutter.
Assembly
The kit is easy to assemble. All parts fit together very well. If a part should be loose, superglue can be used. The wheels must be glued and won't turn.
Dimensions at 100% scale (1:24)
The fully assembled model has the following dimensions
Height: 40.6mm
Depth: 42mm
Width: 24mm
The kit card has the following dimensions when printed
Height: 23.5mm
Depth: 60mm
Width: 45mm
Scaling will work in a low range due to the tolerances.
Other models
I will also try to publish other car related garage / diorama models. Stay tuned!
I hope you had as much fun printing and assembling it as I did :-)
Do you like my work? I would be very happy if you would support my work on Ko-fi.