1 / 1
Non-return valve for a kitchen hood / Zpětná klapka k kuchyňské digestoři
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parametric non-return valve fitting over the exhaust pipe(OD=111mm, but is parametric - can be easily changed).
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 296
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- GNU General Public License v3.0
The model was created in FreeCAD 1.0 and should be edited in the same(i.e. Assembly workbench used was not present in earlier version).
Important Files:
- data.FCStd: contains spreadsheet that is used to set parameters for all parts of the model. Most important of those is the inner and outer diameter of the exhaust pipe and of the valve body
- assembly.FCStd: Assembled valve for preview and checking
- *.stl: exported parts, ready to print
There are prepared holes for possible counterweight to be bolted on.
