James Webb Space Telescope (JWST) - Full model
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a miniature replica of the JWST, it is not an easy print but the result is really amazing!!
- Ocena
- 5 / 5
- Polubienia
- 115
- Pobrania
- 801
- Wydruki
- 9
- Wyświetlenia
- 5609
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial
Hello fellow space exploration enthusiasts! I made a small replica of the James Webb Space Telescope, as close to the original as I could!
The model is fairly complicated as it has lots of pieces and tight tolerances, some parts to glue together and some really precision assembly required, but it is definitely worth it!
In the files You will find an assembly guide, have a look at it before starting to print stuff as all the recommended settings and notes are in there!
I printed it myself with a Prusa Mini but didn't have any alignment tool so I made one! It should make aligning the support arms easy as long as You are careful enough.
In total it uses around 90g of filament if you stick with my settings. Print time is around 10hrs on my MINI, with faster machines it will be quicker.
Please let me know in the comments if You find it hard to print and share it if You make it! If You like this model but the effort is too much, I made a keychain shaped like the mirror which is actually the same mirror of this replica, just with a keychain hole on top!