Liczymy pasujące modele…
I needed a triglide for some 38mm (2.5") webbing to hang a wildlife trail camera. It's even got the grippy teeth things to keep things good and secure. You can ignore the imperfection on the part in the photograph, that was due to me…
Wydruk około 0,49 €–0,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted to fasten down my hot tub cover with 2 inch webbing, so I purchased this “Plastic Buckles, Heavy Duty Side Release Buckles, Dual Adjustable parachute buckle, Plastic clips for Webbing straps (2 Inch,4 Pack)”. I needed to mount…
Wydruk około 4,08 €–4,99 € nettoWstępna wycena jednego wariantu
A parametric FreeCAD model, within the spreadsheet there are 3 simple parameters: Width - set the width of the nylon strap you wish to make a buckle for EndThickness - set the thickness of the material on either side of the strap Depth -…
A stackable coaster to celebrate the successful launch of the JWST! - Comes in both stackable and plain versions (with and without knobs) - Comes in two sizes (max cup base 76 mm and 90 mm) - Print with color change at > 1 mm
My work backpack straps kept slipping every time I slung and unslung my bag. So instead of buying I designed these in Fusion 360. Photo is of an earlier model, files are slightly closer fit and more chamfered. Source file included.
Print Details: 0,35mm layer height colour change at 1,25mm Fusion model included.
This is a quick release mount to attach a Elecrow ThinkNode M1/M5 to 25mm webbing. Build notes You will need two M2*4mm hex bolts to attach the back plate to the device. PETG is preferable to allow for a bit of flex on the release tab.…
Good results if printed with petg.
This machine is designed to automatically measure, mark key locations, and then cut webbing or cord for production purposes. These files are provided as is, the model was assembled and tested to be working properly, and the firmware was…
Remix but for looped webbing. Mix and match, have one side adjustable and one looped if you want Remix and compatible with the original
The James Webb Space Telescope (sometimes called JWST) will be a large infrared telescope with a 6.5-meter primary mirror. The project is working to a 2018 launch date. The Webb will be the premier observatory of the next decade, serving…
Print the endcaps and latches from the original fileset, exact same hardware Orange box in picture is the original size for comparison otherwise this is just longer by 3cm.
Two parts. Made to fit a countersunk M4 bolt. Use a thread tap to get the threads smooth. 25mm is standard width but found out that some webbing is slightly wider so made one 26mm. Melt a hole in the webbing for the bolt to go through.…
When storing long material such as round stock, wooden trim, threaded rods they need to be locked in place to stay there. These magnet locks using standard 25 mm webbing band, it is screwed into the locks preferably using 2x8 mm plastic…
I got a request to design a minifigure vest based on the Canadian CADPAT design. Here is my attempt at it. Prints upside down with no supports needed.
A simple T-Piece that can be used for attaching a 10 mm webbing perpendicular to a 20 mm webbing. I used it for a chest-strap of a cycling musette bag, but it may be useful for other MYOG purposes as well.
The James Webb Space Telescope (sometimes called JWST) will be a large infrared telescope with a 6.5-meter primary mirror. The project is working to a 2018 launch date. The Webb will be the premier observatory of the next decade, serving…
A sliding adjuster for half-inch webbing. Made as part of my small camera wrist strap project.
This model is compatible with the lego system.
I couldn't find the mirrors online. So I made a 'blank' that fits in the outer rings, and applied peel and stick gold mirror contact paper to them. It is NOT a perfect mirror. But it's better than not finding them :) Print 18 of these. I…
Print the endcaps and latches from the original fileset, exact same hardware Orange box in picture is the original size for comparison otherwise this is just longer by 3cm.
Remix but for looped webbing. Mix and match, have one side adjustable and one looped if you want Remix and compatible with the original
This mount is designed for standard MOLLE webbing, laser-cut MOLLE , and standard 25mm webbing used on most backpacks. This includes non military packs! Furthermore I used the official apple design guidelines to get the curvature of the…
printable version of a slik clip, allows easy attachment + removal of webbing. onshape link . samples in photo printed in polymaker ASA on a p1p w/ a 0.8mm nozzle for strength. cover is the clip lifting ~30lbs. from testing i'd estimate…
This is my James Webb mirror. I wanted one that was completely printable, outside of the mirrors and is designed to work with 10cm mirrors bought from Amazon, linked below. This requires about 3.5kg of filament, and will weigh a similar…
I wanted a way to mount my Aranet4 to the straps of my backpack. This case holds the Aranet very securely to 1" or 25mm webbing. It absolutely must be printed in a flexible material. I printed mine in Fiberology MattFlex 40D. I also…
Remixed this to make it a little wider. The hydration water tube I have is insulated, so it's a little wider.
Multicolour print for my mmu2s, but perhaps with the correct colorswitches, you can print it an a regular printer. After printing, just add a safety pin with some strong tape (or hot glue). Be careful when using it to spot the red…
JWST Launched on Christmas day 2021. So added some text to this Xmas decoration from JayJey to remember the day.
Two parts. Made to fit a countersunk M4 bolt. Use a thread tap to get the threads smooth. 25mm is standard width but found out that some webbing is slightly wider so made one 26mm. Melt a hole in the webbing for the bolt to go through.…
This model includes almost all of the deployment steps of the James Webb Space Telescope including: Solar Panel Antenna Fore and Aft Sun Shield Pallets Left and Right Sun Shield Boom Extension Aft Momentum Flap Tower Deployment Secondary…
Brighten your tree this season with this ornament of the James Webb Telescope's Mirror! A great gift for science lovers and space enthusiasts, this model is sure to be a hit. This ornament is printed in separate parts that snap together…
This is a pretty simple print, You just need some glue to hold the pieces together. It is based off the real JWST with the outer ring of tiles tilted more towards the center. HOW TO PRINT Print first one “JWST Keychain Base”, make sure…
Hello fellow space exploration enthusiasts! I made a small replica of the James Webb Space Telescope, as close to the original as I could! The model is fairly complicated as it has lots of pieces and tight tolerances, some parts to glue…
This mirror is meant to recreate the look of the James Webb Space Telescope mirror array. I picked up some gold mirrors on Amazon and designed frames to hold them each in place with a dot of glue. Each frame is keyed to slot into the next…
This lamp requires LEVITON no.4155 light sockets and can have up to 7 installed on it. I cannot guaranty that other light sockets will fit. To assemble this lamp correctly follow the assembly picture to know which arm length goes where.…
Following the successful deployment of the James Webb Telescope, I came up with a keyring in celebration.
This is an easy to print JWST model with mirrors and support structure as they appeared during assembly and testing prior to being covered with protective material for launch. My way of teaching myself to use reference images for 3D…
Cosplay webbing accessories. Used to join and adorn 25mm (1 inch) webbing. All print without supports, except the 4-way. Print the 4-way with minimal simple supports. For light-duty or aesthetic purposes. Not tested for strength.
With the success of the JWST launch, I thought it would be cool to have a desktop model of the JWST mirror assembly to display on my desk. The model is designed to be printed in two major parts, to facilitate the base and the mirror to be…
This spacer (version 2) effectively prevents the webbing stopper from rubbing directly against the carbon fiber backplate, reducing wear and potential damage. It fits well and provides a necessary buffer without adding bulk. A must-have…
I use 1" strapping for several projects. The buckle lets you loop the strap thru an eye and then back securing it. Here are the things I used for this project: * 1 inch strap / Heavyweight Polypropylene Webbing ( https://amzn.to/439M6Cy )…
The little plastic covers for the wheel axels on my grill fell out when rolling it around the deck. Pretty lame for a new grill to have an issue with an injection molded part. Oh well perfect simple use for the printer. These fit in with…
Wall mount for lawn mower Webb 12. Print two of them, then align them on the wall in suitable distance.
This model is compatible with the lego system.
Simple and quick print, I find 0.1mm gives the best result. Sew it to anything! Shirts, Backpacks, Hats, Jackets, Jeans, Anything!
A squared Planter with Grid webbing detail with a drip tray. Planter dimensions: 125mm x 115mm x 125mm Ironing is active
A basic model of the James Webb Space Telescope The model is full scale with a 6 meter mirror but is designed to be scaled down and printed at about 1/100 scale
This webbing split bracket is designed for use with the GFC Camper's 0.5-inch T-slots, providing an attachment point for 1-inch webbing. Fabricated from ASA (ABS) the tolerances are tight. For me these brackets require pliers for final…
Webbing rack for thicknesses <25mm and <40mm
3D Print the legendary James Webb Space Telescope in ONE PIECE in Multi-Color! While not a true 1:1 space telescope scale model, this design was inspired by the original engineering drawings from NASA and tweaked over a year to be 3D…
Designed for sewing dog harnesses and collars with a Brother Innov-is M280D without embroidery backing. The embroidery area of the MD280D is 100mmx100mm, the hoop can handle webbing up to 30mm. The metal plate of an original hoop is…
This is a model of the Ariane 5 rocket carrying the James Webb Space Telescope. The top ist turnable so you can choose to show the opening which reveals the JWST or the front of the hull showing the decals. It's also possible to fold the…
My design of the JWST! It may require sanding and glue when printed!
My design of the JWST! It may require sanding and glue when printed!
Naming convention: beltclip-{beltwidth}-{beltthickness}-{number1}-{number2} beltwidth is the width in mm beltthickness thickness in mm time 10 number1 number of belts fitting on one side number2 number of belts fitting on the other side…
Charamile Designs' Red Herring grip but it has a webbing that makes it more comfortable to use. Increases the surface area on your hand's webbing and has fillets on the corners Uses the same grip front and trigger as the original RH.…
Designed specifically for rock climbing crash pads, but should work for various applications where you need to secure 1 inch (25mm) webbing to a loop. Tested with PCTG to hold 200+ newtons (~50lbs). Recommended Print Settings: Material:…
This practical and easy-to-print upholstery webbing stretcher simplifies upholstery projects by helping you stretch webbing securely and evenly. Perfect for DIY furniture restoration and upholstery tasks, it ensures consistent tension and…
This is a James Webb Space Telescope that only uses 3d printed parts for the outside and center piece. I wanted a version that wasn't entirely 3d printed so I used wood as the back board which allowed me to save money and plastic. Sizing…
Harness Hardware for use with 1.75 inch webbing Category: Sport & Outdoors
This is a keeper for loose ends of webbing on a backpack so they're not flopping around. This is made for (2) pieces of 20mm webbing. If it's tight, you can scale it's width in the X axis in your slicer. This is firm on an Osprey pack I…
This tag is meant to be printed with filament that glows in the dark. It will help you find your backpack in the night and you can never loose it really.
This is a sliding webbing strap keeper. Gravity will keep it in place at the bottom of your shoulder strap. :) Print at the high end of your PETG range. 5 perimeters for solid print. .97 extrusion multiplier to avoid excess build up on…
This is a webbing keeper for a 38mm waist belt. This takes a bit to get on but once on, works great to keep the end of a waist belt from flopping around. Print as oriented with 5 perimeters to ensure it's solid and in PETG at the high end…
The Webber Summit series of grills has backlit burner knobs. To enable the LEDs you press a momentary switch. This switch has a “waterproof” rubber sleeve over it that keeps the switch mechanism inside and out of the elements. The rubber…
This has a 1mm gap on the side of the top section and a 3mm gap on the bottom section. Allows replacing metal g-hooks. I printed this out of PA-CF, but It would probably work fine in other materials. I did try standard nylon filament, but…
Hi this is a webbing reel to speed up your roll ups. I got the idea for the design from the image above. A drill is needed or alternatively you can design a simple handle to fit the 6mm hex shaft. The shaft and the main body is designed…
Don't you just love the dozens of clip types out there. Virtually all the same idea but with just enough changes to frustrate the average maker. The is a derivative of http://www.thingiverse.com/thing:4940 . 75% the thickness and had to…
I needed a way to secure my kayak on my car roof. You only need to put the stopper with the webbing attached into the trunk or in between a door and you have a secure attachment point.
webby · halloween bowls minimalist candy bowl designs for halloween • two different bowl shapes with spider web patterns notes: make sure your filament is dry and calibrated to ensure print quality and minimise stringing highly recommend…
🕷 Webbella – The Witchy Spider – From Cute & Cursed: The Chibiween Collection 🕸 Meet Webbella , the tiny spider witch with a hat three times her size — and a heart just as big. 💜 She spends her nights mixing glittery potions and weaving…
Github project link: https://github.com/TrumpetH4X/JWST-LED-Panels Overview I've always enjoyed the honeycomb mirror arrangement of NASA's James Webb Space Telescope (JWST). To commemorate the telescope's launch on December 22, 2021, I…
This is a model of the james webb space telescope mirror using Acrylic Hex Mirrors Required Material: - 18x Acrylic Geometric Hexagon Mirror Stickers (Mine was 23mm each side) - 18x Adhesive Circles (Mine was a 1mm thick foam, 15mm in…
Here is a catch all bowl with a Rattan Kane webbing pattern. Think of it as a little gift basket you can use to gift thoughtful goodies. I would say, perfect for mother's day! Multiple filaments not required. The same print profile can be…
A simple clicker in the shape of the JWST! I would add detect thin walls since the first part that goes into the key switch has to be so thin. I included two shells. One the shape of the mirrors and the other more rounded. Enjoy!!…
A g-hook for 38mm / 1 1/2 inch webbing. All webbing holes are evenly spaced. Can function as a triglide as well.
This a holster for 1.5oz cans of modern OC spray. I modeled it around the Fox Labs 1.5oz can but other cans with a similar style should work. The fit is a little on the loose side when printed on my printer but a few wraps of electrical…
I use ¾" strapping for handle projects. The buckle lets you loop the strap thru an eye and then back securing it. Here are the things I used for this project: * 3/4inch strap / Heavyweight Polypropylene Webbing ( https://amzn.to/39Lom93 )…
Buckle for 25mm webbing 3 versions for 25mm wide webbing Print settings: 0,2mm layer 8 walls use supports
Remix of Camera Strap Quickrelease by Mountainstorm , making it more compatible with standard webbing hardware, edges chamfered for comfort, and is easier to print with less enclosed supports supports to remove. Straps/Webbing can be sewn…
This project is a high-fidelity model of the James Webb Space Telescope. It focuses on the iconic primary mirror array and the complex rear structural elements, including the backplane truss and the ISIM chassis. Scale: 1:44 (Approximate)…
This 3D-printed tool is designed as a practical aid for handling straps, webbing, and flat belts . Its fork-shaped profile allows easy guiding, holding, and positioning of flexible materials during coiling, organizing, or general workshop…
When storing long material such as round stock, wooden trim, threaded rods they need to be locked in place to stay there. These magnet locks using standard 25 mm webbing band, it is screwed into the locks preferably using 2x8 mm plastic…
This is a single through-hole g-hook meant for use with 1.5 inch (38mm) webbing. It's intended to be SLM printed in stainless steel or aluminum. Anything less will most likely be too weak due to the thinness of the design.
This triglide was printed via nylon SLS and is meant for use with 1.5 inch / 38mm webbing. It is slightly thicker, but is very strong.
A triglide with two extra columns for 1.5 inch / 38mm webbing. Allows further securing opportunities.
This triglide uses M3 screws, nuts, and washers to reinforce the triglide's columns. Meant for use with 38mm / 1.5inch webbing.
A thicker g-hook design to attempt to strengthen the hook portion. For 38mm / 1.5 inch webbing.
I got a request to design a minifigure vest based on the Canadian CADPAT design. Here is my attempt at it. Prints upside down with no supports needed.
A simple T-Piece that can be used for attaching a 10 mm webbing perpendicular to a 20 mm webbing. I used it for a chest-strap of a cycling musette bag, but it may be useful for other MYOG purposes as well.
Added folding print-in-place arms. Results in a cleaner print and a more accurate model!
This is very simple remix of original JWST keychain made by TheIgorMC. Big thanks to him! Changelog Added holes to mirror holder pillars Added handle on the mirror bottom Suggestions I have used default “0.1 mm DETAIL” print settings I…
