1 / 6
Hoop for embroidering webbing with a Brother Innov-is M280D — zdjęcie 1
1 / 6

Hoop for embroidering webbing with a Brother Innov-is M280D

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Hoop for embroidering webbing with a Brother Innov-is M280D

Ocena
0 / 5
Polubienia
5
Pobrania
25
Wydruki
0
Wyświetlenia
294
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Designed for sewing dog harnesses and collars with a Brother Innov-is M280D without embroidery backing.

The embroidery area of the MD280D is 100mmx100mm, the hoop can handle webbing up to 30mm.

The metal plate of an original hoop is required.

There are two clamps. The one with steps must be attached to the back. The solid clamp on the front.

Used 3mm screws.

printed in PETG 

 

Tagi