Liczymy pasujące modele…
A brim is recommended for adhesion. Designed for printing with PETG. Due to the locking caps, please note that removal from the harness will break the clips off and they will need to be printed again if removed.
This model stands out as a display piece, barn decor, shelf flex, or the start of a full farm set if you get wild with it. Prints well in PLA or PLA+ and scales like a champ. Minimal supports depending on your slicer settings
The swing arm droops and the wireharness droops even more. When the print head is in the back right corner, the wire harnes/ptfe tube will catch on the fan. The 4 plastic rivets pop off the fan guard. The guard is made from steel. This…
Wall-mounted hook with a cute paw design for dog leashes, harnesses, collars, or similar items. Designed to be screwed to the wall for a secure hold, but you may glue it as well. All mounting screws are hidden . The front end cap is…
This is a wire harness management system designed in Creo, based on a snap-fit mechanism that allows one part to securely attach to another without additional fasteners. The interlocking design ensures firm retention while still allowing…
Bring strength, scale, and realism to your collection with this Realistic African Elephant , a highly detailed wildlife model sculpted with premium anatomical accuracy. Standing firmly atop a rugged rocky base, this majestic elephant…
This cock ring is designed to adapt a strap-on harness to wear with a penis, preventing the straps around the dildo ring from pinching your skin. The inner ring is sized to snap into a 2.5" diameter outer ring. It's fine in plastic, but…
I made these side latch things for my Simlab P1X Pro to connect a six-point harness. Also made groin area latches that are a separate download. Advise printing these so that the loop is parallel to the printing bed to withstand most…
These brackets prevent the cable harness from snagging on the left corner behind the fan. They also serve as a mounting solution for the C1L. Unlike the C1, the C1L has no threaded inserts in the rear plate. The fans are secured with…
Print with 7 Walls ( enough wall thickness) and zero infill best results with PETG print on the "INPUT"side to print without supports add 5mm screws
I couldn't find a suitable harness for my Sims Plumbob costume, so I designed one that you can wear all day and still sit down. Printed in TPU A95 and assembled with strips. You will need a printer with approx 310x270 mm print area Use…
Just a little harness for the Pi 3/4/5 so that it's not sliding around on your desk during testing. It should support the following Pi's which all share the same footprint: 5 4B 400 3B 3B+ 3
If you hike, you may use the Cotton Carrier Twist and Lock camera harness or sling. These use a special fitting attached to the tripod mount. While this fitting still has a standard 1/4-20 tripod thread, wouldn't it be easier if the…
A quick release buckle for your BCD or Tec/Sidemount Harness. This buckle offers a low-profile design that reduces bulk while maximizing security. It’s precise locking mechanism ensures that once you’re clipped in, you stay in, making it…
You can print the parts you need according to the direction of the wires. I used a 2.5mm Cable tie, The maximum width of this design is 5 millimeters.
V2 is 0,3 mm wider than the orgin version, that equals about 2%
A 2 part back plate for a manokit/ shark fin/ wing design to wear with a shirt. The plate with the straps works like a backpack and goes under the shirt, the part that has the fin attached goes over the shirt and slides into the channel.…
remix from my own model to make a manokit harness easier! again remixes are highly appreciated. you will still need 2cm wide nylon webbing to finish the harness and perhaps some fur or fabric to give the fin some texture.
The idea is to guide the printhead cable harness while minimising stress and weigth. I chose to pass the harness under the extruder carriage to straigthen it from the printhead, and hide it a bit. The printhead cable guide also stress…
Chipolo one bracket for belt 25x1mm. It is solution for mostly for harness or collar where there may be obstacles. Printing instructions: PLA or PETG 0,20 mm layer height infill 15% minimal Print locks 2 times with size 97- 100% size,…
This is a wingfoiling harnes hook I made. After testing different designs, this is a good strong design. It's easy to print. Settings, you can use PETG, which is strong and watter proof. (4 layers and 80% infill is a good idea).…
This model will make a super strong FORGED CARBON Wingfoil Harness HOOK. There are 3 parts, 2 for the base, 1 for the piston. Please following this youtube video from Easy Composites. Watch it first, once you feel you can do it 3d-print…
This is a pin and key for angel guard and harness safety restraints - print in landscape as the prints will be much stronger and far less likely to break. Category: Tools
A model of the main idea from the linked blog. Could be modified to adopt multi axis posts, but the beetle costume didn't call for the complexity. Made for 10-24 screw and appropriate heat set insert.
Highly adaptable handlbar bag harness for bikepacking. Disigned for Stability and light weight. Solid mounting on the handlebar to eliminate wobble and rubbing on the frame. Usable with standard dry bags and common handlebar bags. The…
Made this for my active harness. Everything is straight and simple so it keeps the harness centered. It's not the prettiest thing in the world, but it does it's job perfectly. No drilling template… best guideline I have is: Bolt on the…
Super simple cable management tool for wire harnesses. It's meant to be glued on to a flat-ish surface. There is a groove around the edge that is supposed to capture excess glue. It's optimal to use a PU glue. There are also a few areas…
The first time I ran my harness with the standard design, three things happened. The motors got *really* hot, way above their spec this softened the 3D printed stuff, especially the sensor plate because the sensor plate is like a washer…
A simple playing figure with harness that can be used in playing boardgames. Using different collours for both pieces makes it pop way more. Print without supports as shown in the slicer picture.
Designed this to allow for mounting of 100mm bolt pattern bass shakers, like Dayton Audio BST-1, to NRG bucket seats without the need for drilling. This mount takes advantage of the seat bottom harness pass-through hole. Tolerances allow…
Strapping an Airtag to your pet is a quick way to add some tracking. Clamps onto a pet harness using 4x M3 bolts. In the Image I have used 20mm bolt lengths, but you could probably get away with 16mm lengths if you inset the nut with some…
This was designed with VORON in mind (reddit.com/r/voroncorexy), but it could work with any printer using 2020 extrusions. This can be put in the middle of the upper rear extrusion using two T-nuts and M5 bolts to secure your main cable…
A toy construction helmet for children 1-3 with an adjustable harness, optional attachments, and an optional logo. The harness joins three bands with plastic rivets, and secures the fit with a fourth snap-back piece. Four clips secure the…
To use it, thread the cables in a circularly symmetrical manner. Place the cable you want to shield the most at the center as a core. Then rotate it while pulling the cables evenly.
Designed to attach a chalk bag to your harness in a low profile and stable manner. I have found it to work a lot better than using a wire gate carabiner which swings around and moves when trying to apply chalk. Probably could be used with…
replacement plate for action cam harness mount made by insta360. Original one was for some reason protruding but this one is flat and it is much more comfortable on ski lifts. Printed flat and big layer height for strenght.
Print as is. Replaces the back cover of the official SlimeVR trackers. Screws are reusable
I set out on a journey to design the best wearable shoulder armor I could come up with, after being disappointed with the historical accuracy of what was available online. I wanted something historically accurate to real mid-16th century…
I previously created a method to keep a lovense max2 held in place but it required a rather pricey chastity belt. It also didn't allow for any adjustment which limited the effectiveness. Thus I designed this contraption. It has a minor…
After getting this car back in the shop after it suffered at the hands of an abusive previous owner, it had many broken or missing plastic parts. As everyone knows, multiple heat cycles on plastic makes it brittle. Add to that the fact…
Need a way to hold and hide the usb cable for the web cam rail on the prusa box. Attached is my attempt. Cover clips over the prusa box web cam rail, holds and hides the usb cable Stl Cover length is 218mm
This model is a simple mounting plate designed to attach to a Go-Pro style chest harness [^1]. The main strap loops accommodate a 40mm wide strap to attach to the harness. The plate has multiple 15mm strap loops, designed to fit most…
Reindeer Harness for 3D Benchy Boat This is just a quick proof of concept. Feel free to modify, I guess you will have great ideas, maybe for other reindeers, 4 or 6 reindeers etc. Designed for 100% scale Benchy:…
Original one has became fragile and fell apart over time. This one was printed with TPU 95a.
8 - M5 Heatset Inserts 1" Rubber Grommet - D = 1" I.D. = 11/16" O.D. = 1-9/32"' Small amount of foam tape to seal the small gaps around the grommet. I used whatever size is standard for Voron panels.
Fits with: https://www.nonstopdogwear.com/en/product/line-harness-5/
I make it for my eastpack when I take my motorbike but this all must be perfect for traveling or hiking for example. Adaptable to different sizes. Version full printed or with strap. Strap :…
A brim is recommended for adhesion. Designed for printing with PETG. Due to the locking caps, please note that removal from the harness will break the clips off and they will need to be printed again if removed.
A bit of the clip broke, and rather than paying £10 for a replacement OE part, I decided to challenge myself to build one. It's a bit bendy with PETG, but does the job, and I don't have any ABS to test if that would be better. 100% infil,…
This is a remix of MandicReally's "Voron Y Endstop Relocation w/ PG7 Cable Gland Mount". The purpose of this remix is to allow it to be used with the Linneo cable harness, which uses a square flange mount with 4x M2x10 FHCS screws (with…
My pad harness, including the boxes, came pretty banged up. I ended up replacing the pad harness with a 1.5" by 4' pool hose, but wanted to make the boxes a little nicer too. With the current hole dimensions, the hose is even a perfect…
select your desired slot size to fit the strap wing foil harness hooks with slot 30mm, 35, 40, 45, 50, 55, 60mm
Plastic parts just don’t last in 56 year old vehicles. Go figure! I took my calipers to an ignition switch and the metal connectors that fit it to design a brand new, custom wire harness that works in a 1965 Buick Riviera. I suspect it…
My D&D character in the campaign I'm in acquired her long longed-for wings, so of course I had to create another new figure. I gave her two new outfit more suitable for flight: light and streamlined – and enchanted against wardrobe…
A chalk bag harness mount for chalk bags with a single hoop. Designed to hold the chalk bag high and close to the body. This will make the chalk bag bounce less on the way down from a route and is still quite ergonomic for me. If it is…
.2mm height - printed on MK2.5S and Ender 3Pro. No supports needed. This is also keyed so you cannot mess up polarity. I used a little bit of gorilla glue to hold it in place, but it is tight enough on its own the way it is.
I was missing one of these for my 2015 silverado so drew this up after fixing the unfortunately common broken door harness wires. Print on it's side for the most strength, I used PETG but should work fine in other materials. Let me know…
Fit to my Mandolorian helmet and a Pyramex HPR541 Full Brim Replacement 4 Point Ratchet Suspension Link to the hard hat band https://amzn.to/3wPwxzR on Amazon "4 points full band" is the whole thing. 4 points no band" is the connection…
This is a wiring harness conduit clamp to replace the original smaller one that comes with the Ender 6 core xy 3d printer. The original is too small, so only the wires are able to fit through it. I made this one so that the conduit itself…
Remix of hachleitner great design I just wanted it to have a slightly tighter hold on my wiring harness and be a bit stronger. V2 remove PTFE tube from extruder and slide them on they allow for the PTFE tube to have movement when installed.
i've got a reference model from internet, and draw it into plastic piece. I made it of ABS, and PA12-CF. You can use an athlete's. belt as a harness. Try it!
These are the harness retainers for MB rails both extended and standard for Xr and standard for GT, should you need to replace them. the extended Xr version aids in the use of the maxxis 12x8 or for just better harness protection should…
harness clips used to secure the rear harness into the chassis. Likely used in other late 80's and early 90's Mazda's as well. These print without supports, but I suggest printing them solid from ABS. The clips are intentionally hard to…
A simple loop for holding wires, with 45 degree overhangs for printing without supports. I made this to provide strain relief for USB cables on my Arcade1up control panel. You can edit the wire_d and screwhole_d parameters in Fusion360.…
Rope style alternative harness.
I created this to hold my harness cable back and prevent abrasion for my Varials by The Float Life Use 2x 10/24 x 3/8" (extra short xr) screws to screw into the back side of the Varials Example of harness abrasion:…
This is a mount i made to turn the battery strap into a mount for an M&R Wireless Wiring Harness for my 2017 F250 6.7 Best to install on the passenger side, away from the Turbo Intercooler. I used ASA for its heat and chemical resistance.…
Used TPU/Flex at 20% infill. Ended up orienting model standing up on the build plate with supports on the oval plug.
Break your harness retainers? Print some more! Printing Instructions Print in a solid material and install!
Harness cover in the engine bay of some Classic Land Rovers. Hard to find at a reasonable price so just print it instead . I've printed it in PETG. But you could use ASA if you are worried about thermal deformation.
Harness hook for wingfoil. 40 mm and 50 mm versions. Print on its side. No need for support.
This model stands out as a display piece, barn decor, shelf flex, or the start of a full farm set if you get wild with it. Prints well in PLA or PLA+ and scales like a champ. Minimal supports depending on your slicer settings
The swing arm droops and the wireharness droops even more. When the print head is in the back right corner, the wire harnes/ptfe tube will catch on the fan. The 4 plastic rivets pop off the fan guard. The guard is made from steel. This…
Long story short I'm making parties and I have gogos dancing in harness. The theme was super hero so 🤷🏻♂️ Here we are 😁. Made to go with this harness (aliexpress, not sponsored) . Pair it with my Green Lantern Ring for a better effect.…
Der Tasso Chip Clip für Hunter Geschirr Maldon / Maldon Up ermöglicht eine sichere, wackel- und geräuschfreie Befestigung des Tasso Chips direkt am oberen Ring des Hundegeschirrs. Der Chip sitzt stabil, klappert nicht und stört weder Hund…
harnessed horse statue If you like it, give it a like and download it, it helps me a lot. Thanks for the support!
Ideally this should be printed in PETG. You can use 3M VHB tape or super glue to attach this. I recommend the tape, as it ensures that it's removable later. Wipe the surface with alcohol before applying. The curve is not always a perfect…
Wall-mounted hook with a cute paw design for dog leashes, harnesses, collars, or similar items. Designed to be screwed to the wall for a secure hold, but you may glue it as well. All mounting screws are hidden . The front end cap is…
This is a wire harness management system designed in Creo, based on a snap-fit mechanism that allows one part to securely attach to another without additional fasteners. The interlocking design ensures firm retention while still allowing…
Bring strength, scale, and realism to your collection with this Realistic African Elephant , a highly detailed wildlife model sculpted with premium anatomical accuracy. Standing firmly atop a rugged rocky base, this majestic elephant…
This cock ring is designed to adapt a strap-on harness to wear with a penis, preventing the straps around the dildo ring from pinching your skin. The inner ring is sized to snap into a 2.5" diameter outer ring. It's fine in plastic, but…
I made these side latch things for my Simlab P1X Pro to connect a six-point harness. Also made groin area latches that are a separate download. Advise printing these so that the loop is parallel to the printing bed to withstand most…
These brackets prevent the cable harness from snagging on the left corner behind the fan. They also serve as a mounting solution for the C1L. Unlike the C1, the C1L has no threaded inserts in the rear plate. The fans are secured with…
Battery harness for HGLRC Draknight 2" Toothpick Drone. (Drone) Designed to hold: 450mAh 7.4V 75C 2S LiPo Battery Note : Only the Battery Holder v2 has been flight tested. Printed using 95A shore hardness TPU.
Print with 7 Walls ( enough wall thickness) and zero infill best results with PETG print on the "INPUT"side to print without supports add 5mm screws
I couldn't find a suitable harness for my Sims Plumbob costume, so I designed one that you can wear all day and still sit down. Printed in TPU A95 and assembled with strips. You will need a printer with approx 310x270 mm print area Use…
Low-Pro Top Tube Garmin Harness ( Enduro / Trail/ downcountry mountain bikes) This project is an ultra-low profile top tube harness designed to move your Garmin bike computer off the handlebars and onto the frame for maximum protection…
Low-Pro Top Tube Garmin Harness ( Enduro / Trail/ downcountry mountain bikes) This project is an ultra-low profile top tube harness designed to move your Garmin bike computer off the handlebars and onto the frame for maximum protection…
Système de harnais permettant de porter un P90 au centre du torse, comme dans la série Stargate. Pour la fabrication, privilégiez des matériaux résistants tels que le PETG ou l’ABS, plutôt que du PLA standard, afin d’assurer une meilleure…
Summary This is a battery harness designed to replace the original Sony BP-HP550-11 battery pack, which typically costs around 25 €. It allows replacement AAA rechargeable batteries to be charged using the original Sony MDR‑RF855RK base…
Just not and bolt with M5 https://competitionmotorsport.com/products/cms-performance-roll-bar-harness-collars?_pos=3&_psq=roll+bar&_ss=e&_v=1.0&variant=43204202135771
This project started when my girlfriend wanted to make some wings for a cosplay. We couldn't find a model online that we liked so I designed my own. You can configure it any way you need to. It uses some aluminium pipe I bought at my…
Just a little harness for the Pi 3/4/5 so that it's not sliding around on your desk during testing. It should support the following Pi's which all share the same footprint: 5 4B 400 3B 3B+ 3
If you hike, you may use the Cotton Carrier Twist and Lock camera harness or sling. These use a special fitting attached to the tripod mount. While this fitting still has a standard 1/4-20 tripod thread, wouldn't it be easier if the…
A quick release buckle for your BCD or Tec/Sidemount Harness. This buckle offers a low-profile design that reduces bulk while maximizing security. It’s precise locking mechanism ensures that once you’re clipped in, you stay in, making it…
You can print the parts you need according to the direction of the wires. I used a 2.5mm Cable tie, The maximum width of this design is 5 millimeters.
![[Updated July 12,2025] Frisky Winged Tiefling, crouched curvy female, flight harness](https://media.printables.com/media/prints/e37932ce-6f6e-4eea-a417-d1a81f6369ef/images/10202359_5ac55138-e592-4265-bb22-4b0ec78e2dd6_8de174ef-5a21-4083-b272-48076164f8c6/frisky-winged-crouch-r5-cover.png)
