Harness Adapter - M18 Trimmer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple harness adapter for a Milwaukee M18 Trimmer/ Weed Wacker.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 451
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
This adapter is designed to allow for attaching a shoulder strap/ harness to a Milwaukee M18 cordless trimmer/ weed wacker. I printed both parts on their flat faces with 100% infill using PETG. When I printed the clamp it was a bit loose on the post of the trimmer so the model has been “tightened” by 1.0mm. The model has been holding up well to my light use.
I used an old shoulder strap from a laptop bag that I had laying around. It works for how it was intended. I have not tested this with commercial harnesses.
I forgot what size nut and bolt - I am pretty sure it is 5mm.
If you print this, please let me know your experience.
Thanks.