Trotec portable AC intake hose adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An intake hose adapter for the portable AC to increase efficiency (a lot).
- Ocena
- 5 / 5
- Polubienia
- 34
- Pobrania
- 386
- Wydruki
- 3
- Wyświetlenia
- 3339
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
An intake hose adapter for the portable AC to increase efficiency (a lot).
Designed for Trotec PAC3500S, but should fit on many others brands, which are most likely the same…
the bayonett catch can be found here (150mm)
update 2026-07-08:
I made a new one for a 200mm hose....didnt test it (yet), but the housing part is the same.
two variants: flat and angled upwards by 40°
the same connector by @Chrisfu, see above (150mm scaled up to 133,333333333%)
two bolt circles: m3 thread inserts and direct into plastic
Why 200mm? Because we can.
More cross section = less flow resistance = less suction from the room (the device isnt really sealed from factory, I recommend to catch this up...) & more air = efficiency!
feedback is welcome!
update 2026-07-20:
I printed the 200mm version for Joel and made some adjustments