Pinecil Stand Iron Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter to hold a Pinecil in a cheap stand. Particular one I have says Noah NH-10W but I've seen it under other names.
- Ocena
- 4,5 / 5
- Polubienia
- 8
- Pobrania
- 95
- Wydruki
- 1
- Wyświetlenia
- 1290
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an adapter I made to hold my Pinecil v2 in a cheap stand I bought on amazon. I added a hall effect to my Pinecil so one version has a holder for a 8mm magnet. It has holes that you could use screws to attach the holder to the stand but I just used some hot glue. I also designed some bumps instead of holes to attach it but never tested. I also put a shot of hot glue on the back just to keep the holder from wobbling in the stand as it didn't have a very snug fit.
If you want to try out the bumps you can edit the model on onshape by suppressing the folder called holes and unsupress the bumps one. If you try it out please let me know how it worked for you.
I also made a holder for spare tips
Designed in onshape
Pinecil Stand Accessories | Iron Holder