1 / 2
Sticky Lint Cleaner roller
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Cheap (the AlEx kind) 100mm length by 38mm inner diameter sticky lint cleaner rolls are a tad wider than the IKEA BASTIS ones. Thus the IKEA roller doesn't perform too good with them. Here's a simple print-in-place roller for those.
No supports required. PLA/PETg with 2 walls and 15-25% infill should be all right.
It is advised to lower the print speed and/or to use some glue (I've printed mine without it), because the central part has a rather small contact patch with the bed and can be torn off the printbed when printing higher up.