Sticky Lint Cleaner roller
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple print-in-place roller for sticky lint cleaner rolls of 100mm length by 38mm inner diameter.
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 53
- Makes
- 1
- Views
- 243
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
Cheap (the AlEx kind) 100mm length by 38mm inner diameter sticky lint cleaner rolls are a tad wider than the IKEA BASTIS ones. Thus the IKEA roller doesn't perform too good with them. Here's a simple print-in-place roller for those.
No supports required. PLA/PETg with 2 walls and 15-25% infill should be all right.
It is advised to lower the print speed and/or to use some glue (I've printed mine without it), because the central part has a rather small contact patch with the bed and can be torn off the printbed when printing higher up.