Stubby Delta Faucet Drain Wrench
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small wrench to tighten the ~45mm drain nut on a Delta bathroom faucet.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 156
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I was trying to install a new Delta bathroom faucet in a very cramped pedestal sink, and didn't have a wrench to fit in the close quarters under the sink. The nut to fix the drain to the bottom of the sink is about 45mm, and depending on your sink there can be very little space down there. This is an issue when the nut has to be pretty tight on there to not leak.
I put together this stubby wrench to tighten the nut in tight spaces. It worked for me, hopefully it can be of use to someone else out there. I'd recommend printing with additional perimeters and/or more infill for strength.