Honda Civic EG/ Del Sol shift linkage bushing (Transmission side)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a model of the shift linkage bushing that goes on the transmission side of the shift linkage. Dimensions…
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 77
- Wydruki
- 0
- Wyświetlenia
- 270
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a model of the shift linkage bushing that goes on the transmission side of the shift linkage. Dimensions should be exact since I measured with calipers but this is only my second time 3d modeling so let me know if anything is off. Also, I made this a split bushing for easy installation.
P.S, if you have a B series swap you'll need a different bushing, this one is specifically for the d series (It's smaller in diameter), the b series is bigger, I just finished modeling that one up if you need it you can find it here https://www.printables.com/model/1110143-acura-integra-b-series-shift-linkage-bushing-trans . Also, you should probably print in TPU if you can since these bushings are usually polyurethane or rubber. 100% infill recommended.
Category: Automotive
If you would like to leave a small tip for my hard work you can do so here :D https://www.paypal.com/ncp/payment/Y5DRF7PN8S5AJ