Honda Civic EG/ Del Sol shift linkage bushing (Transmission side)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a model of the shift linkage bushing that goes on the transmission side of the shift linkage. Dimensions…
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 77
- Makes
- 0
- Views
- 270
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a model of the shift linkage bushing that goes on the transmission side of the shift linkage. Dimensions should be exact since I measured with calipers but this is only my second time 3d modeling so let me know if anything is off. Also, I made this a split bushing for easy installation.
P.S, if you have a B series swap you'll need a different bushing, this one is specifically for the d series (It's smaller in diameter), the b series is bigger, I just finished modeling that one up if you need it you can find it here https://www.printables.com/model/1110143-acura-integra-b-series-shift-linkage-bushing-trans . Also, you should probably print in TPU if you can since these bushings are usually polyurethane or rubber. 100% infill recommended.
Category: Automotive
If you would like to leave a small tip for my hard work you can do so here :D https://www.paypal.com/ncp/payment/Y5DRF7PN8S5AJ