1 / 4
Pc Auslastungsanzeige / Hardware Monitor — zdjęcie 1
1 / 4

Pc Auslastungsanzeige / Hardware Monitor

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

1,61 € – 1,97 € netto (bez VAT)

Dla pliku: CE3_LED Anzeige PC auslastung blende LEDs.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 1,79 € netto (środek widełek).

Masa podana przez autora
18 g
Czas druku podany przez autora
2 godz.
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Hi there, I built a hardware monitor for the PC. So you always have your PC utilization in view.

Ocena
0 / 5
Polubienia
16
Pobrania
40
Wydruki
1
Wyświetlenia
639
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Hi there,

I built a hardware monitor for the PC. So you always have your PC utilization in view.

An ESP8266 is built into the display, which controls a Ws2812b Led Strip. in the appendix you will find the source code for the ESP as well as the Powershell script which reads the load on the PC and transfers it to the ESP via WLAN. I printed everything in PLA on an Ender3 with various mods. If you have any questions or suggestions for improvement, write to me. Unfortunately I could not upload a .PS1 file so the Powershell script is in a .txt. You would have to enter your access data for your WiFi in the ino file before you flash the code on the ESP. when the esp has successfully connected to the wifi, the description lights up red. Then you have to enter the Ip of the ESP in the Powershell script and start it regularly with a cron job. now your load indicator should regularly show the current pc load.Have fun rebuilding!

 

Hallo,
ich habe einen Hardware Monitor für den PC gebaut. So hat man seine PC Auslastung immer im Blick. In der Anziege ist ein ESP8266 verbaut dieser steuert einen Ws2812b Led Strip an. im Anhang findet ihr den Quellcode für den ESP sowie das Powershell skript weelche auf dem PC die auslastung ausliest und sie an den ESP über  WLAN übträgt. Gedruckt habe ich alles in PLA auf einem Ender3 mit diversen Mods. Ich konnte leider keine .PS1 datei hochladen deswegenm ist das Powershell skript in einer .txt. Ihr müsste in der ino datei noch euere zugangsdaten für euere Wlan eintragen bevor ihr den Code auf den ESP flascht. wenn der esp sich erfolgreich mit dem wlan verbunden hat leuchten die beschreibung rot. Dannach müsst ihr noch im Powershell Skript die Ip des ESP eingtragen und es per cron job regelmäßig starten. nun sollte euere ausllastungsanzeige regelmäßig die aktuelle pcauslastung anzeigen. 

Bei Fragen oder verbesserungsvorschlägen schreib mich gerene an.

Viel Spaß beim nach bauen!

 

You need : 

ESP8266 (i used D1 mini)

WS2812b (arround 40 leds from an Strip with 60 LEDs per meter)

Some Filament

Some Wires

USB kabel 

Switch 

 

 

Print settings that i used for PLA on my Ender3:

10% Infill 

190°c Nozzel 

60°c Bed

No Supports 

arround 60mm/s

 

 

 

 

Tagi