Mic stand for podcasts or video calls
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D-Printable Microphone Stand for Shure SM7B, SM7dB or many others.
- Ocena
- 5 / 5
- Polubienia
- 37
- Pobrania
- 364
- Wydruki
- 2
- Wyświetlenia
- 1696
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
3D-Printable Microphone Stand for Shure SM7B, SM7dB or many others.
Elevate your audio setup with this custom-designed, 3D-printable microphone stand, specifically tailored for the Shure SM7B and SM7dB microphones. Whether you’re podcasting, streaming, or recording in a studio, this stand offers a sturdy and stylish solution. You could for sure use it also with other microphones with same thread.
Specifications:
• Compatible Microphones: Shure SM7B, SM7dB or other with sam thread size or adaptor.
• Thread Size: 5/8”-27
• Material Recommendations: PLA, ABS, PETG (or other high-strength filaments)
• Assembly: Minimal parts, easy to assemble with standard tools. Optionaly add 9mm transparent bumpers in bottom. (Example)
• Base Diameter: 75mm
• Stand Height: 135mm
Printing Recommendations:
• Material: PLA, PETG, or ABS for durability. PLA is suitable for most indoor environments, while PETG and ABS offer greater strength and heat resistance.
• Layer Height: 0.2 mm for a balance of speed and detail.
• Infill: 35% or higher for more weight and more stability
• Supports: No
If you like my work please support me. :-) Buy me coffee at ko-fi.