1 / 4
Home Assistant Voice Preview Edition Enclosure
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Original enclosure for Home Assistant Voice Preview Edition optimized for 3D printing.
- Ocena
- 5 / 5
- Polubienia
- 228
- Pobrania
- 754
- Wydruki
- 3
- Wyświetlenia
- 11 371
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 3) (Komentarze: 9)Remiksy (4)Kolekcje (274)Powiązane
This model is the original enclosure for Home Assistant Voice Preview Edition optimized for 3D printing.
It's based on the official injection-molded parts but with some adaptation to avoid many supports :
- Home Assistant logo on the bottom enclosure is removed
- 3D screw threads instead of threaded inserts for the top enclosure
- Flat wheek
- Flat button
Before printing it, read the assembling/reassembling procedure on Home Assistant documentation website to avoid breaking parts of your device :
You will also need to bring some parts from the original device :
- The PCB
- The speaker
- All the screws
- The rubber pads for the bottom enclosure
- The rubber lug for the button
You have multiple way to customize the device with different level of difficulties:
- Easy : replace only the top enclosure. You will not need to disassemble the PCB.
- Intermediate : replace the top enclosure, the bottom enclosure and the button.
- Hard : replace all the plastics part. You will need to full diassemble to device and unclip the wheel for the PCB
Here's the recommended settings to print the parts:
- Top wheel: 0.12mm layer height, no support
- Top button: 0.12mm layer height, no support
- Mic switch: 0.12mm layer height, no support
- Bottom enclosure: 0.20mm layout height, support enabled
- Top enclosure: 0.20 layout height, no support