1 / 4
Home Assistant Voice Preview Edition Enclosure
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Original enclosure for Home Assistant Voice Preview Edition optimized for 3D printing.
- Rating
- 5 / 5
- Likes
- 228
- Downloads
- 754
- Makes
- 3
- Views
- 11,371
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This model is the original enclosure for Home Assistant Voice Preview Edition optimized for 3D printing.
It's based on the official injection-molded parts but with some adaptation to avoid many supports :
- Home Assistant logo on the bottom enclosure is removed
- 3D screw threads instead of threaded inserts for the top enclosure
- Flat wheek
- Flat button
Before printing it, read the assembling/reassembling procedure on Home Assistant documentation website to avoid breaking parts of your device :
You will also need to bring some parts from the original device :
- The PCB
- The speaker
- All the screws
- The rubber pads for the bottom enclosure
- The rubber lug for the button
You have multiple way to customize the device with different level of difficulties:
- Easy : replace only the top enclosure. You will not need to disassemble the PCB.
- Intermediate : replace the top enclosure, the bottom enclosure and the button.
- Hard : replace all the plastics part. You will need to full diassemble to device and unclip the wheel for the PCB
Here's the recommended settings to print the parts:
- Top wheel: 0.12mm layer height, no support
- Top button: 0.12mm layer height, no support
- Mic switch: 0.12mm layer height, no support
- Bottom enclosure: 0.20mm layout height, support enabled
- Top enclosure: 0.20 layout height, no support