170 models
The original design was made by box and loop: original design https://cults3d.com/es/modelo-3d/variado/boxandloop , this one is modified to be able to put an elechouse v2 voice recognition module,Casco Iron Man MK5 Totalmente articulado,…
For more info about this project, please have a look at my blog post .
This model is the original enclosure for Home Assistant Voice Preview Edition optimized for 3D printing. It's based on the official injection-molded parts but with some adaptation to avoid many supports : Home Assistant logo on the bottom…
The amazing Voice Assistant finally has a vertical stand! In fact, now it has three : The original stand, which has no backing for the device. It's elegant (you can see it in the photo), but some have rightfully complained that they feel…
Simple stand for the voice remote of the fire TV stick.
It seems as though every Roku remote has different specs. And they are all vulnerable to breakage of the battery cover. So here is a replacement battery cover for the Roku Voice Remote, model RCA1R, ASIN:B0BQS9Y69G. I print it on my Bambu…
A hollow voice token which allows you to see the cost and agent icon of a blocked space. My other Dune Imperium models: https://www.printables.com/model/272184-dune-imperium-insert…
A simple wall mount for the Home Assistant Voice Preview Edition
Left and right are available: Please note : I might not be able to keep the files here up to date at all times. It's better to get them from the Git repo . I've been a maker and board member of the French e-Nable association for a few…
This is a remix of ThatGuy @ThatGuy_613397 Please check out his Blog https://tristam.ie/2024/1126/?utm_source=printables_esp32-s3-esphome-voice-assistant-with-local-wake-word
Create your own voice assistant using this 3D printable case designed for Home Assistant's Wyoming Satellite protocol. The case is compatible with both Raspberry Pi 4 and Zero. It uses a USB conference speaker for seamless audio input and…
08-June I had the tolerance for the curved chain guide to gear spacing too tight causing it to bind when printed on some printers. I have increased this distance by 0.5mm which has removed the binding and allows the motor to move freely.…
My take on ReSpeaker Lite Case. Made it to adapt to my needs, feel free to remix it and adapt to yours :) Everything is made to attach with pressure, no need to screws. Some glue/dual tape may be needed, but I don't use it. Print the top…
I designed this 45 Record Adapter in MESHMIXER and FUSION360 for the Printables 45 Record Adapters contest (10/03/2023). 1.5 inches around with a .25 inch hole in the center 38mm outside with 6.35mm hole
Updated 1/15/24 changed the dev board to an esp32-s3. redesigned pcb for new dev board redesigned puck to be simpler to put together and thinner, looks a lot better too I think! This puck uses an esp32-s3 dev board with esp home to be a…
ReSpeaker Lite Enclosure with Screw Fixation Upgrade your ReSpeaker Lite project with this custom-designed enclosure , meticulously redesigned for ease of assembly and professional aesthetics. Now enhanced to allow secure mounting of the…
A token to block a board space when a player uses the "The Voice" card in the board game Dune: Imperium. Could be need of 2 tokens at a time. Category: Games
** Brand New Update! * FireTV w/Tile Remote Cover - Alexa Voice Remote version 6 or V6. I have updated the fit and finish completely and now it fits perfectly printed in PETG and PLA. This is a battery door replacement so you need to…
Finished as of 250111 Remember to separate objects before printing!
I wanted him on my desk and now you can have him too.
Vhorlath Realms – Season I The Mourning Banshee, Voice of the Hollow Grave is an Undead dark fantasy 3D printable STL miniature depicting a spectral figure shaped by grief, curse, and restless memory. Drifting between the living world and…
Mohawk chief - Voice of the Great Tree of Peace
If your Woody doll’s pull string won’t retract, it’s likely that the plastic part inside the voice box has shattered. In one picture, you can see the red plastic piece that I glued back together as part of my redesign; it was broken into…
Description Ever wanted to know what your pet wants to tell you? This won't solve it! But still can spark some joy and fun! An Arduino-based DIY version of Talking Pet buttons! It's easy to build and add customized sound samples to use…
Super quick model of the ship from Voices of the Void Printing notes: Print the body upright, and paint supports onto the "arches". The ship pictured is printed at 2000% scale and is 20CM long You may have to scale the engine down…
I love my new TV. Unfortunately, my kids love it too. The nice remote that comes with it, has been played with and dropped on the floor already a few too many times. So I decided to design and print a case for it. This is a flexible case…
*Edit: This does not fit the newest remote, for a remote with TV power & volume buttons. Check out the remix by Russell_S here: https://www.thingiverse.com/thing:3914289 For old remote style you can use this other design i made:…
This elegant Roman-inspired headphone stand is designed after ancient marble columns. Featuring a fluted column body and sturdy base, it serves as both a functional and decorative desktop accessory. Blending modern technology with ancient…
Small plate that connects to the Home Assistant Voice Preview Edition feet on the one side and to a Skådis® board on the other There's a version without and with a simple reflector for sound (as after attaching it to the wall, the speaker…
This is a case for a voice assistant build around Raspberry Pi Zero 2W and ReSpeaker 2Mic HAT compatible hardware (this particular HW has no LEDs). Additional HW: USB C PCB adapter, M3 inserts, M3 screws and washers
Watch the full video on the channel :
This is the full case for the Voice playback mp3 player Category: 3D Printing
There are numerous tutorials online for DIY voice assistants and smart speakers based on ESPHome. The hardware typically consists of an ESP32-S3 development board, an INMP441 microphone, and a MAX98357A audio amplifier. I would like to…
This is a replacement battery compartment cover for the L5B83H 2nd generation Amazon Firestick Voice Remote. This remote is used with the Fire TV Stick, Fire TV Cube, and certain smart TVs. It is nicely contoured with a flat base allowing…
You like voices of the void, dont you? I think keljoy likes kissing boys :3
Start with White, then go Black. 2 colors/ 1 change total. Banksy Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/359901 Link to all multicolor art:…
🇩🇪 Swissphone s.QUAD Ständer für X15 / X35 / Voice / C35 / C45 Dieser präzise konstruierte Ständer ist die ideale Ablage für deinen Swissphone s.QUAD Melder. Er ist so ausgelegt, dass er komplett ohne Support gedruckt werden kann – für…
Everything is fully functional, you can rotate the ring to increase / decrease the volume, and press on the center to activate it manually The cover plate can be found here as its a remix of the official file:…
This is a recreation of the infamous Voice Activated sticker for use in the most creative places you can think of. Hand dryers and printers are the best! This design has the ability to use up to 3 colors (Background, Works and Icon, and…
You can build this lamp simply by yourself. I provide my code so you can controll it via app and with Google home or Alexa In the Code is a link so you can copy my blynk app. There are 6 modes available: Color (Simple one Color) Spin (One…
For years I wanted my own drink dispenser like the one you see behind the bar. After some initial research, I found them to far exceed my budget. But now, with the power of the 3D printer, I have created my own luxury item for less than…
Create your own voice assistant using this 3D printable case designed for Home Assistant's Wyoming Satellite protocol. The case is compatible with both Raspberry Pi 3 and 4. It uses a USB conference speaker for seamless audio input and…
These are the official 3D printable parts for the Hi-Fi speaker upgrade for Home Assistant Voice PE. Detailed instructions can be found on the Home Assistant Community forums here:…
PRINT AT 644.44% SCALE!!! I printed in black PLA and you can barely see that its there. I printed at 0.2mm layer height.
This is a very simple wall mount for a Vizio Voice Remote for a newer Vizio TV (V655M-K). I'm not sure if the remotes are the same for other models. I prefer to use Command Strips to avoid marking the walls so I didn't bother putting…
This mount uses magnets to hold the Voice unit in place. Press the magnets into the 4 posts on the printed model. I recommend using a right-angle USB-C cable to connect your power source. Requires: 4x 4x2mm magnets 4x *ferrous/magnetic*…
https://www.youtube.com/watch?v=qjUb6Nn8liA Updated 12/27/17: Cover now fits 30mm arcade button Full learning guide (includes Fusion 360 source, Product Links, Software setup, etc.)…
UPDATED V2 Lid: removed unnecessary mic “slots”, rotated snap closure to raise from the back first (allows speaker magnet to clear circuit board) Case: rotated snap closure to match lid LED lens: adjusted size (adjust X-Y contour for good…
Kerfur from Voices of the Void. The line going through the face seems to just be a problem with my printer, not the model. (Can't stand up btw)
General info I have used this tutorial to get everything working. Parts 1x Raspberry Pi Zero 2W + Pins / Sockets ( approx. 20 Euros) 1x ReSpeaker 2-Mics HAT ( approx. 15 Euros) 1x micro SD Card (approx 6 Euro) 1x Dayton Audio DMA45-4…
The voice assistant housing is based on the Aga footstool designed by Chierowski.
The cover plate for the Home Assistant Voice - Arc Reactor Mod. This file is posted separately because it's a remix of the official one.
Wall mount for a WiiM Voice Remote that comes with the WiiM Amp and Wiim Amp Pro. Printed in PETG, standing up with no support on a BambuLab A1 Mini. Comes with two countersunk holes for screws, but command strip work too.
Ever wanted to get rid of Google Home or Alexa? With Rhasspy (soon integrated with HomeAssistant ) you can create your own "Voice Assistant" which runs in your own home without calling to outside servers to understand you. I'm about to…
If you haven't printed yet, redownload the files as I've made a few minor tweaks for a better fit and alignment. I also realized the top of the box doesn't have a octogan in the middle, so I have created an Accurate Top as well as an Octo…
This design is comprised of two separate pieces that can be glued together with a few drops of CA glue. Both can be printed fine without supports in PLA. The holder clip is universal and will fit your Home Assistant Voice PE without…
I made this a gift for some friends of mine who are very close to the Memorial. Never forget. “On Tuesday morning, September 11, 2001, the U.S. came under attack when four commercial airliners were hijacked and used to strike targets on…
The mount includes 3 pockets on the back side (where the mount touches the wall) that are specially designed for double-sided tape application. Two variants are included: with and without “Nabu” name
Field-tested replacement handles that have been banged up on tour with no problems. Solidworks files included. - Handle_replica_DFM (recommended) - mimics the look and shape of the original handle, with a minor modification to make it…
This is a modified version of the Ducky Swimming model that contains an internal space to place a module. In this case I used a module from bigdawgsgreetings that can record 10 seconds of audio and replay the audio when light sensor…
Voices of the Void - Kerfur Toy It's a little kerfur toy. Based on this model: https://bsky.app/profile/monique-monsters.votv.dev/post/3mdtoop3rpc2u
This is wall mount for the Home Assistant Voice Preview Edition, designed as a simple and practical mount.
DIY ESPHome Home Assistant Voice: Preview Edition using ESP32-S3 Component : esp32-s3-wroom 2x inmp441 mic max98357 amp 40 mm hifi speaker YD-040 rotary encoder (center button + dial) ws2812 12 bit ring LED Wiring diagram and config will…
Box to replace the cardboard housing for the Google AIY kit (v1, not sure if v2 sizing is different). There is no space for the button, so this will only work for voice activation libraries. Post-Printing Screws: voice HAT - M3 screw (Up…
I built this little robot enclosure for my offline voice recognition module as I thought it would make it fairly cute looking. I'm using it for a bunkbed control unit for my little girls to allow them to control the lights and the colors…
FORD FOCUS MK1 RADIO 6000CD EON VOICE KNOB
Oathkeeper , Gaurdian of lost voices ( Designed in Blender ) 40% infill in balls is best for some weight , The chains may need some clean up with a hobby knife or you can try paint on supports in Prusa-Slicer if you like As you can see I…
Mount for MP3 player Category: 3D Printing
As a benchmark product of Luwu Intelligence’s RIG series, the smart desktop pet RIG-Puppy (nickname: Lulu) perfectly integrates the creative freedom of 3D printing with immersive embodied intelligent interaction. More than a 5-DOF…
More info here: https://www.instructables.com/id/Bluetooth-Voice-Controlled-Moving-Lamp/ Bluetooth and voice control are two closely related topics in the realm of Arduino. Many enthusiasts aspire to integrate Bluetooth functionality into…
The updated PCB mount now holds: Espressif ESP32-DevKitC SPH0645 MEMS microphone 8 LED NeoPixel ligthbar I had to move the position of the amplifier to place the microcontroller in the center as it's longer than the original board. That…
Originally designed as a sparepart for the Electro Voice ELX115, this poti knob might fit other devices as well. I designed the model for a friend of mine who plays in a band, and he asked me for two knobs, one with a white and one with a…
this is a toy version of the Voicera communication devices used in hospitals so that kids can play with and even keep their own. the black and white parts can be imported to bambu together and colored, mess with the layer order tho so…
These are designed to click onto the factory SideClick mounting tabs, and fit snugly onto the Roku Voice remotes. They are designed to print with no supports, with the flat on the bottom of the remote flat to the bed. Simple, strong,…
Electro-Voice MT-4 I recently discovered on Youtube a Metallica concert in Moscow in 1991 . I was amazed by the mass of the crowd . I love listening to Metallica and I am a bit of an audiophile, so I was interested in how they sounded…
This is a stand for the sony icd-ux570 voice recorder. It's setup to point downwards towards a laptop while keeping it off of the desk The pins that hold the top and bottom together are designed to go through a 2.5mm hole (the pin holes…
Small plate that connects to the Home Assistant Voice Preview Edition feet on the one side and to a Honeycomb wall on the other. There's a version without and with a simple reflector for sound (as after attaching it to the wall, the…
🇩🇪 Deutsch reSpeaker XVF3800 Gehäuse mit integriertem Lautsprecher: Voice-Satellit für Home Assistant Ein kompaktes, rundes Gehäuse für das reSpeaker XMOS XVF3800 4-Mic Array mit XIAO ESP32S3 von Seeed Studio. Es ist um einen…
This is a topper mount to place a Home Assistant Voice PE on top of an original Sonos Play:1. This is the model without the built-in microphone. This was printed in its default orientation with regular supports set to snug. I've printed…
HA Voice Assistant Preview - False Bottom provides a storage location for items using Grove Port. Remix of this could be done to include attachment points for items. I am attaching an ESP32-H2 (Grove Port) and using it as a thread router.…
Used to mount in the cockpit of a Piper Archer 28
This is a printable puck case for a voice assistant for home assistant. I covered it with fabric (from an old sock) and IMO it looks pretty nice and works well. Files included for 2 inch round speaker or 3 inch round speaker. May require…
Are you tired of loosing you FireTV remote? Attach it right to the back of your TV/other surface with double sided tape (I find that "Wotec Extra Large 1.18 in x 160 in Double Sided Tape" is quite good for mounting stuff in the house, so…
This is a vertical topper mount to place a Home Assistant Voice PE on top of an original Sonos Play:1. This is the model without the built-in microphone. The vertical mount was very quickly just “bolted on” to my original design. It's…
This is a container to hold this voice recorder on the HSW Slice it and print it upright; needs supports to print the 13mm hex peg on the back Attach to insert_empty.stl (from here:…
This model is a faithful recreation of the world-renowned HMV trademark in a simple plate format. Originally painted in 1898, the image of Nipper listening to a wind-up gramophone has become a timeless symbol of music history. The plate…
If you are planning a private song or karaoke contest, here is the trophy for the winner! The design is based on the one of "The Voice" I made it for a friend of mine who is a teacher and is planning a music competition with her class.…
Sony ICD-PX370 Mono Digital Voice Recorder - Gridfinity
Introduction The Playstation Eye Camera, has a 4-channel microphone array, which is useful for microphone pickup in room situations. It's a very well option for budget voice assistant inputs, as it has very accurate wakeword detection…
I recently migrated to Home Assistant, and after discovering the Voice Assistant possibilities, i designed this case to nicely package a Raspberry Pi Zero 2 W with a Keyestudios ReSpeaker 2-mic Hat and a 3W speaker. The idea behind the…
This design remixes the Home Assistant Voice Skådis mount from @TNG to work with the M3 T-nuts system for Skådis. You can use any of the M3 T-nuts, but I recommend the version I created as it doesn't need any M3 nuts or tapping threads.…
This is a part of the astro a50 gen 4 helmets that it has for the ear pads since some second-hand astro helmets do not sell these accessories and you have to buy them separately, I bought some helmets and I created this part... ..I know…
Wall Mount for Dräger FPS-Com Voice Wall Mount for Dräger FPS-Com Voice for 3,5, 4 mm countersunk & M5 screws. Click&Go while your Com waits for you. Follow us for more! Website: www.draeger.com YouTube: www.youtube.com/@Draeger LinkedIn:…
Original Design by Unlight This is a remix of Unlight's ESP32 S3 Voice Assistant case. I modified the top and bottom to include a honeycomb pattern for better airflow and cooling. Fits the ESP32 S3 Dev Board, 2812b LED strip, and INMP441…
A dapper looking wall mount for the Home Assistant Voice PE hardware unit. The wall mount has two dimples that allow you to mount the bow tie or any other accessory you might come up with on the front of the wall mount. Also includes a…
Mount for the home assistant voice preview voice assistant for 25mm peg board.
A housing to combine the VPE with the speaker unit of an Echo Dot 3 for far better voice quality. The idea is based on this repo: https://github.com/glbailey/Voice-Assistant-EE I realized that the Echo Dot 3 had a quite good speaker and…
I made this stand originally for Star Wars Funko Pops At the moment this recording card chip fits well : https://www.aliexpress.com/item/4000036633652.html?spm=a2g0s.9042311.0.0.5e8f4c4dPf5zwA Another Model here is more generic but NOT…
DIY Mycroft voice assistant based on the Raspberry Pi, Seeed ReSpeaker 4-mic array , and some cheap speakers. Printing I used black PLA for all parts except mycroft_led_ring.stl , which requires any transparent material (I used clear…
