1 / 1
Sony ICD-UX570 voice recorder stand
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a stand for the sony icd-ux570 voice recorder. It's setup to point downwards towards a laptop while keeping it…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 25
- Makes
- 0
- Views
- 407
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
This is a stand for the sony icd-ux570 voice recorder. It's setup to point downwards towards a laptop while keeping it off of the desk
The pins that hold the top and bottom together are designed to go through a 2.5mm hole (the pin holes are 2.6mm), so i recommend drill/reaming out the hole with a 2.5mm bit. Print the top at 100% and print the base at 99% and it should be a tight fit. As show this was printed at 0.20mm layer height with a 0.4mm nozzle with white hatchbox pla
Category: Household