1 / 5
Swissphone s.QUAD Stand X15 X35 Voice C35 C45 halter — image 1
1 / 5

Swissphone s.QUAD Stand X15 X35 Voice C35 C45 halter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This precisely designed stand is the ideal storage solution for your Swissphone s.QUAD Pager.

Rating
5 / 5
Likes
6
Downloads
100
Makes
1
Views
385
Reviews
1

Updated at source:

Model information

License
Standard Digital File License

🇩🇪 Swissphone s.QUAD Ständer für X15 / X35 / Voice / C35 / C45

Dieser präzise konstruierte Ständer ist die ideale Ablage für deinen Swissphone s.QUAD Melder. Er ist so ausgelegt, dass er komplett ohne Support gedruckt werden kann – für saubere Oberflächen ohne Nacharbeit.

#### ✅ Features

- Perfekte Passform: Getestet mit Originalgehäuse – der Melder sitzt sicher, wackelt nicht und lässt sich leicht entnehmen.

- Kompatibel mit der gesamten s.QUAD-Serie (baugleiches Gehäuse):

- Digital: s.QUAD X15, X35

- Analog: s.QUAD Voice

- Hybrid: s.QUAD C35, C45

- Supportfreies Design: Optimierte Geometrie, damit kein Support nötig ist.

- Clip-freundlich: Der Gürtelclip auf der Rückseite hat genügend Platz und blockiert nichts.

#### 🖨 Empfohlene Druckeinstellungen

- Schichthöhe: 0,12 mm für maximale Präzision und Passgenauigkeit

(0,16 mm oder 0,20 mm funktionieren ebenfalls, aber 0,12 mm liefert das beste Ergebnis)

- Support: Aus (nicht nötig)

- Wandlinien: 2

- Infill: 15 % Gyroid

- Material: PLA oder PETG

---

🇺🇸 Swissphone s.QUAD Stand for X15 / X35 / Voice / C35 / C45

This precisely designed stand is the ideal storage solution for your Swissphone s.QUAD pager. It is optimized to be printed without supports, ensuring clean surfaces with no post-processing needed.

#### ✅ Features

- Perfect fit: Tested with the actual housing – the pager sits firmly, doesn’t wobble, and can be removed easily.

- Universal compatibility with the s.QUAD series (same housing dimensions):

- Digital: s.QUAD X15, X35

- Analog: s.QUAD Voice

- Hybrid: s.QUAD C35, C45

- Support-free design: Geometry is optimized so no supports are required.

- Belt-clip friendly: Rear cutout provides enough room for the belt clip.

#### 🖨 Recommended print settings

- Layer height: 0.12 mm for maximum precision and fit

(0.16 mm or 0.20 mm are possible but 0.12 mm gives the best result)

- Support: Disabled (not needed)

- Walls: 2 perimeters

- Infill: 15 % gyroid

- Material: PLA or PETG

Tags