P
PrintablesClammyAccuracy
Ender 5 Plus Bed Level Test Print (350x350)
Very quick and easy bed leveling test. The squares are 20mm each placed on every corner and middle of the bed.
- Downloads
- 2,416
- Likes
- 60
- Rating
- 4.75
Search results: x35
Counting matching models…
P
PrintablesTycho Design
M2.5 Socket Head Screw Collection M2.5x3-M2.5x35 ISO 4762 / DIN 912
Collection of screws (ISO 4762 / DIN 912) including : M2.5x 3, 4, 6, 8, 12, 16, 20, 25, 30, 35 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. This part is quite tiny, consider…
- Downloads
- 1,144
- Likes
- 61
- Rating
- 4.5
P
PrintablesAWSW
Sovol SV08 first layer test 350x350x0.2
Sovol SV08 first layer test 350x350mm using the complete print bed and a single 0.2mm layer. With that you can really see if your 1st layer is OK. =) IMPORTANT NOTE: You will need to remove the silicon brush (blue arrow) in the upper…
- Downloads
- 779
- Likes
- 59
- Rating
- 0
P
PrintablesTycho Design
M5 Socket Head Screw Collection M5x6-M5x35 ISO 4762 / DIN 912
Collection of screws (ISO 4762 / DIN 912) including : M5x 6, 8, 10, 12, 16, 20, 25, 30, 35 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I would recommend…
- Downloads
- 730
- Likes
- 57
- Rating
- 5
P
PrintablesJason Boi
Hotwheels Sannahed Display Insert 35x35
Hotwheels x IKEA x 3D printer. Introducing the Hotwheels Sannahed Insert display solutions. All you need to do is print 4x either the 10 or 12 rack for your frame insert. This will fit snugly into the frame and you can display 40 or 48…
- Downloads
- 691
- Likes
- 148
- Rating
- 4.67
P
PrintablesPRAXXUS
DROK LM2596-SDC LED 1-Button 66x35mm BUCK CONVERTER CASE ENCLOSURE
There are many Buck Converter enclosures posted here, and none would fit what I thought was a common 1-button LED Buck Converter (66mm x35mm), which I bought on amazon. (…
- Downloads
- 518
- Likes
- 56
- Rating
- 5
P
PrintablesShadow Moose Industries (Amos)
Reinforced benq EX3501R / XR3501 Vesa Mount adapter
Reinforced in blender and then edges hand smoothed/filleted with dynamic topo sculpting
- Downloads
- 504
- Likes
- 12
- Rating
- 5
P
Printablesgiuseppe
dimensional test cube 35x35
dimensional test cube, it can calibrate printer and profile for optimal dimensions
- Downloads
- 356
- Likes
- 11
- Rating
- 4.75
P
PrintablesMark
75mmx350R Shell
75mmx350R Shell This Shell was used in the M4 Sherman Tank. It’s not 100% accurate but I think it’s pretty close. It's not meant to be a historically accurate replica, just close. I thought that if you’re going to have a German 88mm (…
- Downloads
- 299
- Likes
- 42
- Rating
- 0
P
Printableswootje13
Crux35 Frame - Original strength and bolts
Key features Supports the original bolts and screws! Just as stiff as original (when printed correctly) Twice as heavy as original Easy to print without supports Tested print settings that work 3 perimeters 30%+ gyroid infill 0.2mm layer…
- Downloads
- 272
- Likes
- 14
- Rating
- 0
P
PrintablesUntrusted Source
Lenovo Tiny CX354A PCIe Bracket
This is a PCIe bracket that can be used on your Lenovo Tiny PC with a Mellanox CX354A (and possibly other 40gbe cards) ⚙ Features Vent holes on the right side that match the side vents of the Lenovo Tiny PC Bracket is secured to the card…
- Downloads
- 270
- Likes
- 26
- Rating
- 5
P
Printablespunisher_1211
Hyundai ix35 trunk compartment cover clip
Hyundai ix35 trunk compartment cover clip
- Downloads
- 258
- Likes
- 14
- Rating
- 0
P
PrintablesSpiffyPopcorn
Crux35 motor protector/motor bumper
Corner motor bumper for happymodel crux35. Print in TPU and zip tie on. I left a window for a 2nd zip tie but it deformed the TPU too much for me. Not sure if they help but added them since I busted motors on a different quad. Made from a…
- Downloads
- 218
- Likes
- 11
- Rating
- 0
P
PrintablesTycho Design
M4 Set Screw Collection M4x3-M4x35 ISO 4029 / DIN 916
Collection of set screws (ISO 4028 / DIN 916) including : M4x 3, 5 6, 8, 10, 12, 16, 20, 22, 25, 30, 35 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. This part is quite tiny,…
- Downloads
- 210
- Likes
- 31
- Rating
- 0
P
PrintablesIsTim
Crux35 - Runcam Thumb Pro Camera mount
This mount holds the Runcam Thumb Pro camera on the Happy Model Crux35. I'd recommend printing in TPU with the camera mount facing up with the large flat side down. Print Settings Printer: Elegoo Neptune 3 Pro Rafts: No Supports: No…
- Downloads
- 201
- Likes
- 8
- Rating
- 0
P
PrintablesTycho Design
M5 Set Screw Collection M5x4-M5x35 ISO 4029 / DIN 916
Collection of set screws (ISO 4028 / DIN 916) including : M5x 4, 5 6, 8, 10, 12, 16, 20, 22, 25, 30, 40 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. This part is quite tiny,…
- Downloads
- 196
- Likes
- 38
- Rating
- 5
P
Printablesgcastle
Honeycomb storage wall for bed 350x350
Honeycomb storage wall for bed 350x350
- Downloads
- 183
- Likes
- 37
- Rating
- 0
P
PrintablesAC807
Happymodel Crux35 better stock Antenna holder
Tough PLA is good PETG was bad And I recommend TPU
- Downloads
- 170
- Likes
- 17
- Rating
- 5
P
PrintablesJorg
Knurled Bottle 2023 - 50x35mm
New version of my old knurled bottle for 2023. Much better design from what I have learnded over the years. Print Settings Printer Brand: Prusa Printer: i3 MK4 Rafts: No Supports: No Resolution: 0.25 with 3 shells Notes: When you first…
- Downloads
- 166
- Likes
- 24
- Rating
- 5
P
PrintablesYuriy
Flywoo Goku GM10 Nano V3 GPS mount for Crux35
Angle 40°. Version with mount above the camera stands, and version to use 20 mm holes. I printed with TPU-like filament with supports. P.S. Have not tried to connect GPS yet, will need soft serial for extra UART. P.P.S. Official guide…
- Downloads
- 161
- Likes
- 2
- Rating
- 0
P
Printablessuit
Universal Knife Block (Gridfinity compatible 5x3x35U)
I dislike knife blocks with dedicated slots for each knife—they never fit what you have, and there's always a slot missing or an empty slot. So, I took a look at various designs out there and tried to come up with a solution that works…
- Downloads
- 161
- Likes
- 20
- Rating
- 5
P
Printablesadcreate
Hyundai-Compatible Seat Recline Knob (Tested on ix35)
A replacement for the stock seat recline knob in the Hyundai ix35. The original one in my car was getting janky, so I modeled a new one. It's comfortable to grip, holds up well, and you can print it in whatever color suits your interior.…
- Downloads
- 160
- Likes
- 8
- Rating
- 0
P
PrintablesHunter Ligeti
Crux35 x DJI 04 AIR UNIT mount
print it flat, no supports needed. Print 2 included versions: 35 degree hard mount 10-50 degree adjustable mount
- Downloads
- 156
- Likes
- 9
- Rating
- 0
P
PrintablesDavid
First Layer Calibration for 0.8 Nozzle 350x350 Bed
This is the first layer test I use for my larger nozzle. Prints a full layer at .32 thickness. Most of the other first layer tests are designed for .4 nozzle so slicing will result in no print... Print Settings Printer Brand: Creality…
- Downloads
- 156
- Likes
- 3
- Rating
- 0
P
PrintablesBlender Enjoyer
Realme 9 rmx3521 phone case
Not the best model but it works. Maybe usb-c port hole need to be little bigger. Print with some TPU. I printed with TPU 96A and it's great. Good luck!
- Downloads
- 148
- Likes
- 3
- Rating
- 1
P
PrintablesPrettyPrinter
Knurled Bottle / Pillbox - 50x35mm - Now With dividers
Knurled container
- Downloads
- 139
- Likes
- 14
- Rating
- 0
P
PrintablesBasementLAB
Repair Lock Pin for Honda Transalp 650 M10x35mm - Perno carena
Repair Lock Pin for Honda Transalp 650 M10x35mm This 3D model is a direct replacement for the original fairing locking pins used on the Honda Transalp 650. It is specifically designed to repair or replace the side panel fasteners, which…
- Downloads
- 130
- Likes
- 13
- Rating
- 0
P
PrintablesAKIINT
Maze 35x35
I present to you another maze, a little bit harder. This time a 35x35 corridor maze. In slicer, please scale the model by 1000 factor. The model has 3 parts: - the maze and the base - this is complete model (17.4 cm) - the maze (17 cm) -…
- Downloads
- 125
- Likes
- 17
- Rating
- 0
P
PrintablesBurnsipoo
Epson LX350 Replacement Knob
I have clients that keep on breaking the original knobs on their printers and thought it would be cheaper and easier to design the knob and print it than to keep ordering new ones.
- Downloads
- 125
- Likes
- 8
- Rating
- 0
P
PrintablesDavid@3DOMEngineering
Desiccant Container - SQ80x35x120
This desiccant box is sized to fit inside a display cabinet so that it is not visible and hides inside in one of the corners. This is effectively a remake of my "Desiccant Container with Screw Cap" -…
- Downloads
- 118
- Likes
- 9
- Rating
- 5
P
PrintablesJP-Printlab
Angle Connector / Winkel 35x35mm for M4 Screws
Angle Connector 35x35mm with 5mm holes for M4 Screws Winkel 35x35mm mit 5mm Löchern für M4 Schrauben
- Downloads
- 114
- Likes
- 4
- Rating
- 0
P
PrintablesF. Jungmann
Gridfinity Ikea Eket drawer Baseplates - 70x35x35 cm
These are the base plates (and spacers) needed for the wide Ikea Eket drawer with 70x35x35 cm dimensions. I used two 5x5 baseplates, two 5x1 baseplates and two 6x2 baseplates. I also created some small spacers for the sides and the back.…
- Downloads
- 113
- Likes
- 13
- Rating
- 5
P
PrintablesDavid Holecko
CLAMP HOLDER 80x350mm
CLAMP HOLDER 50x300 https://www.printables.com/cs/model/752981-clamp-holder CLAMP HOLDER 120x400mm https://www.printables.com/cs/model/828691-clamp-holder-120x400mm
- Downloads
- 107
- Likes
- 13
- Rating
- 0
P
PrintablesMuurph
IKEA Method Holepattern Orgenizer 70x45x35
It´s a little box to make unused space accessible. espacially for Pinhole Patterns of Ikea-Method kitchen funiture. Note: I increased the Vertical shell Perimeters to 5, to avoid infill in the Walls. To make everything look smooth, I…
- Downloads
- 103
- Likes
- 39
- Rating
- 4.75
P
PrintablesAlex St. Amour
Snap Pins for Mosquito - 3x35 mm
These printable snap-in 3x35 mm pins are intended as a replacement for the clevis pins in the Mosquito airsoft replica. Link to the Mosquito airsoft replica on Printables:…
- Downloads
- 100
- Likes
- 16
- Rating
- 5
P
PrintablesRobbycor
Skadis 3'er Schublade mit Halter 129x35mm
Dies ist eine Schublade mit Halter für 3 Schubladen für die Skadis Wand. Druck: 0,4mm mein Infill=30% Gedruckt mit PLA+ Viel Spaß
- Downloads
- 100
- Likes
- 12
- Rating
- 0
P
Printablesmelted_idiot
DME Holster Swissphone sQuad X35
Holster für Swissphone sQuad X35 Dieses Holster ist zur Nutzung mit den Standart Gürtelclips, die es auf diversen Platformen gibt, gedacht. Einige Vorteile sind Vorbereitung für Gürtelclips vernünftiger halt am Gürtel stabile Ausführung,…
- Downloads
- 99
- Likes
- 7
- Rating
- 0
P
Printableszzzy
insert and backplate for Friends light switch cover by ChrisX35
The back cover may be needed if the hole in the drywall was poorly done and extends outside of the switch cover. The insert should fit right on and will be held in place by the switch cover screws, just don't over tighten those. Print…
- Downloads
- 99
- Likes
- 71
- Rating
- 0
P
PrintablesT88powered
Crux35 DJI 03 Air Mount
NOTICE: This does not work with 3.5" props, only 3". The 3.5" props interfere with the canopy. I looked for quad frames that would fit, or be easily modified to fit the 03 Air Unit while achieving CRUX35 flight times, but those do not…
- Downloads
- 98
- Likes
- 7
- Rating
- 0
P
PrintablesRetroPurp
Swissphone s.QUAD Stand X15 X35 Voice C35 C45 halter
🇩🇪 Swissphone s.QUAD Ständer für X15 / X35 / Voice / C35 / C45 Dieser präzise konstruierte Ständer ist die ideale Ablage für deinen Swissphone s.QUAD Melder. Er ist so ausgelegt, dass er komplett ohne Support gedruckt werden kann – für…
- Downloads
- 94
- Likes
- 6
- Rating
- 5
P
PrintablesMakerMeik
3.5" FPV Drone Replacement Frame for Crux35
After the bottom plate of my Crux35 frame from my 3.5” FPV copter broke twice in a row and I no longer had a replacement, I designed a compatible frame for the 3D printer. The dimensions are designed so that the stiffness of the arms…
- Downloads
- 93
- Likes
- 6
- Rating
- 5
P
Printables3DMentes
SX350j Dual 18650 Box Mod
Best print in ABS or PETG with supports. Designed for Fat Daddy´s v4 low profile 510 and keystone battery connectors P/N: 228 and 209 Print Settings Printer: MakerFarm i3V Rafts: No Supports: Yes Resolution: 0.2 - 0.3 Infill: 30%…
- Downloads
- 91
- Likes
- 12
- Rating
- 0
P
Printablesgskollnau
Bonsai display table (05) rectangular 240x150x35 mm
Bonsai display table (No. 05) rectangular 240x150x35 mm, best for bonsais with rectangular or oval pots. Feel free to scale up or downn until you like the result and it suits your tree.
- Downloads
- 86
- Likes
- 21
- Rating
- 5
P
PrintablesjonnieZG
ix35 Headlights Dust Cover
A cap for the Hyundai ix35 headlights with the corresponding silicone gasket. Print the cap in ASA, ABS, or another material capable of withstanding higher temperatures. The "Gasket [Silicone]" files are not for printing, they are just a…
- Downloads
- 81
- Likes
- 18
- Rating
- 0
P
PrintablesMoho Lalo
HP OMEN x25f and x35c VESA adapter mount 100x100mm
This is a 3D-printed adapter for the property VESA Mount for the HP OMEN x25f and x35c. The through holes are for M4x40mm bolts.
- Downloads
- 81
- Likes
- 2
- Rating
- 0
P
PrintablesYevhen Rudenko
Bearing 6202 (15x35x11) No support
Print-in-Place Bearing (15x35x11mm) Engineered with tight tolerances to minimize play, it serves as a robust alternative for non-critical mechanical assemblies. Technical Specifications Dimensions: 15mm x 35mm x 11mm (Width). Scalability:…
- Downloads
- 81
- Likes
- 3
- Rating
- 0
P
PrintablesMcFly
iFlight GoPro 8 Naked Mount for Crux35 Happymodel
Mount for iFlight GP8 Category: 3D Printing
- Downloads
- 81
- Likes
- 0
- Rating
- 5
P
PrintablesXavierSam
Drill Holder Worx WX354.9
Remix of LordS's "Drill Holder" design, size is adjusted to fit the WORX hammer drill model WX354.9
- Downloads
- 79
- Likes
- 10
- Rating
- 0
P
PrintablesUnion
CRUX35 DJI 04 lite bracket
Fixed 20 Deg version. I will publish more fixed angle versions later. Print 2off flat using TPU no supports required. With rocksteady off some intermittent very slight vibration is present in the camera recording and feed. With rocksteady…
- Downloads
- 79
- Likes
- 6
- Rating
- 0
P
PrintablesMehdi
Cable Duct 35x35 6mm²
The updated model now has a lower overhang angle (<45°), with the upper part centered and improved sturdiness. 20% infill PLA or PETG No need for support Suits for 6mm² cable M4 screw holes
- Downloads
- 78
- Likes
- 18
- Rating
- 0
P
Printablesexperify3d
Hyundai ix35 shutter lock for trunk
If you break the shutter trunk lock now you can replace it. Print in PETG, ABS or ASA.
- Downloads
- 72
- Likes
- 14
- Rating
- 0
P
PrintablesFilesX
Volador vx35 front cam guard small
The small model is lighter but provides less protection, no TPU in view. The large model is heavier but provides more protection, slight TPU in view. Print laying flat on the side, infill density is up to you and your weight requirements.…
- Downloads
- 68
- Likes
- 5
- Rating
- 5
P
PrintablesDGP_Maluco
Turtle Basking Area for 80x35x40 Aquarium
I designed this Turtle Basking Area piece that fits on an Ender 3 bed (235x235mm). You have to print two copies. After that it hold on to the glass very tight so you don't need to glue the parts. The upper part is cut for 3mm acrylic…
- Downloads
- 67
- Likes
- 18
- Rating
- 0
P
PrintablesZechimaera
Pied pour escabeau / stepladder foot 23X35mm
Comme tout possesseur d’escabeau, je me suis déjà retrouvé perché dans mon salon avec un patin abimé sur l'échelle, des rayures sur le parquet et une perte de stabilité. Plutôt que la réparation habituelle, j'ai pris quelques minutes pour…
- Downloads
- 65
- Likes
- 6
- Rating
- 0
P
PrintablesFilesX
Volador vx35 TPU cam mount + bumper
This part is printed in tpu and replaces the standard aluminum mount that comes with the frame. It provides more protection for longer camera's such as WS moonlight by mounting the camera further back in the frame. Note: If you have a…
- Downloads
- 65
- Likes
- 3
- Rating
- 0
P
PrintablesToBiBa
FPV Happymodel Crux35 drone "wall"mount and sideplate
Wallmount: PRint like ever you want Sideplate: Use TPU or something else flexible
- Downloads
- 63
- Likes
- 5
- Rating
- 4.5
P
Printablesklein_walke
Drainstand (35x35x13cm) + Raiser (⌀25cm)
---> English Drainstand + Raiser for Flowers and Plants! Drainstand: If you want to messure your EC or pH-parameters befor and after watering it's usefull to use a Drainstand. The Drainstand ist also usefull if you just want to be sure…
- Downloads
- 62
- Likes
- 15
- Rating
- 5
P
PrintablesColdSector
HappyModel Crux35 Printed Parts (with Step Files)
Based on the STL files available from HappyModel https://www.happymodel.cn/index.php/2021/09/08/3d-printed-camera-holder-and-antenna-holder-for-crux35-crux35-hd/ Step files included for easy modification
- Downloads
- 58
- Likes
- 3
- Rating
- 0
P
Printablesmi.strz
Outdoor / educational sundial V2 M4x35mm mount. Outdoor-owy / edukacyjny zegar słoneczny. V2 mocowanie M4x35mm
A remix of my sundial model. Instead of a printed hinge (which caused problems with assembly), I used a hinge in the form of an M4x35mm Allen screw. Remiks mojego modelu zegara słonecznego. Zamiast drukowanego zawiasu (który sprawiał…
- Downloads
- 58
- Likes
- 17
- Rating
- 0
P
Printables3Dsquarebox
L Bracket 40x40x35mm
Simple functional L Bracket 40x40x35mm with countersunk screw holes.
- Downloads
- 52
- Likes
- 8
- Rating
- 0
P
PrintablesEnno
Lego Botanical in IKEA Sannahed 35x35cm Frame
ATTENTION: Printer with at least 350x350mm bed required. This print is placed in an IKEA Sannahed 35x35 frame between the passe-partout and the back wall, providing a holder for placing a Lego Botanicals set on top, for example. When…
- Downloads
- 50
- Likes
- 18
- Rating
- 0
P
Printablesbalpejobs
Pie estanteria modular 35x35mm
Protector simple de suelo para estanteria modular de 35x35mm en L. Impreso en PLA y con poco filamento. Se puede escalar si tu estanteria es de 40x40 u otra dimensión.
- Downloads
- 49
- Likes
- 15
- Rating
- 0
P
PrintablesGambit3le
Sony PS-LX350H Tonearm Clip
I created this in Onshape to replace a missing tonearm clip for a Sony PS-LX350H. When I bought the record player this part was snapped off and only partly there. I used what was left, and a set of digital calipers to get some…
- Downloads
- 48
- Likes
- 4
- Rating
- 0
P
PrintablesClough42
9x35 Milling Machine Table Protector Tray Cleat (PM-935)
Downloadable parts for this YouTube video: This is a cleat designed to anchor a 1/4 Aluminum Sheet Pan to a milling machine table to protect the table, keep chips out of the slots, and provide a handy place to set tools while working.…
- Downloads
- 47
- Likes
- 14
- Rating
- 0
P
PrintablesBehold81
Vesa Adapter for XR3501R/EX3501R/EX3203R
Here is a simple and strong mount for the BenQ Monitors where the adapter mount non longer works. Used was a plate converter Vesa Plate ( https://www.amazon.co.uk/Goobay-63267-VESA-Adapter-Mount/dp/B00GOI0WD2 ) and 6 x M4 45mm bolts.…
- Downloads
- 43
- Likes
- 1
- Rating
- 0
P
PrintablesJimmy Johansson
1U Rack Server Wall Mount (Lenovo X3550 M5)
Wall Mount modeled for a Lenovo X3550 M5 1U Rack Server. You need two of them, just mirror it in the slicer. Go ahead and give it thick layers and many walls, I used 0.32mm layer height and 8 walls. It's surprisingly strong and the only…
- Downloads
- 42
- Likes
- 1
- Rating
- 0
P
PrintablesAn2
Crux35 - 25 degrees mount for Runcam Thumb Pro Camera
This is a camera mount for the Runcam Thumb Pro Camera on a Happymodel Crux35. It protects the camera an provides a fixed camera angle of 25 degrees. Enjoy! Print Settings Printer: Self built Rafts: No Supports: Yes Resolution: 0,2mm…
- Downloads
- 42
- Likes
- 3
- Rating
- 0
P
Printableskozmickid
6X35mm Finder Scope
This is a 6X35mm finder scope based on the following items from surplusshed.com: https://www.surplusshed.com/pages/item/L2075.html https://www.surplusshed.com/pages/item/L14523.html It consists of the following parts: Optical Tube (qty 1)…
- Downloads
- 40
- Likes
- 2
- Rating
- 0
P
PrintablesCats
crux35 arm braces
oops i forgot to upload the .step, the length issue is still around tho its like .2mm to long or something. This needs to be cut out of carbon fiber, it serves no benefits if its just 3d printed.
- Downloads
- 40
- Likes
- 5
- Rating
- 0
P
PrintablesGianPoua
Hyundai IX35 Armrest Lever
It's a replace of the armrest for Hyundai IX35. I printed in horizontally using PETG filament and it works well.
- Downloads
- 39
- Likes
- 3
- Rating
- 0
P
PrintablesNodus Design
Practical Bag Clip / Package Sealer 15x35 mm
A lifesaver for your kitchen! This practical bag clip is designed to securely seal your opened packages. Simply fold over your bags of chips, coffee, pasta, or frozen foods and slide this clip on. Its specialized inner geometry grips the…
- Downloads
- 38
- Likes
- 6
- Rating
- 0
P
PrintablesMr.Ramtech
WordClock 16x16 To Fit Ikea SANNAHED 35x35 Frame
https://www.ikea.com/gb/en/p/sannahed-frame-black-80459117/#content https://www.aliexpress.com/item/1005002048512739.html?spm=a2g0o.order_list.order_list_main.77.2a881802ZVR2Nl
- Downloads
- 37
- Likes
- 6
- Rating
- 5
P
PrintablesMxngø
Razor MX350 Front Fender
This is a remix from link below. I liked the way the Sur-Ron front fender looked also didn't feel like spending $30 on the mx350 plastic, so I resized it to fit the mx350 and added a hole for the bolt. I made two my first attempt came out…
- Downloads
- 37
- Likes
- 0
- Rating
- 0
P
PrintablesW3DSTUDIO
Vegetable Storage Container for Fridge — Compact Organizer 130x50x35 mm
A compact container for storing vegetables in the fridge, helping you keep your food fresh and your fridge organized. Perfect for small vegetables like radishes, shallots, chili peppers, garlic, or cherry tomatoes. The size is designed to…
- Downloads
- 36
- Likes
- 11
- Rating
- 0
P
PrintablesAnton Soliaryk
FX35 / FX25 Power Module Case
FX35 Load Module Enclosure – Custom 3D Printed Case This is a custom-designed enclosure for the popular Chinese electronic load module FX35 . The case provides secure protection, reliable cooling, and a clean look for your bench setup.…
- Downloads
- 36
- Likes
- 2
- Rating
- 0
P
PrintablesJames Kirk
Base for the ZK-FX35 USB Load Tester
Its a baseplate for the ZK-FX35 load tester. I did not like the Micro-USB-port so I installed a USB-C-connector (for power supply). The USB-C-connector is from aliexpress and you have to solder plus and minus onto the board (near the…
- Downloads
- 35
- Likes
- 7
- Rating
- 0
P
Printableszibi
Lampa modułowa - panel LED COB 48 chip 40x35
Projekt obudowy do panelu LEB COB 48 chip 40x35 Konstrukcja obudowy pozwala na łączenie lamp pomiędzy sobą w ten sposób możemy budować większe moduły oświetlenia. W projekcie wykorzystano: M2x6 - 2 sztuki - do przykręcenia płytki…
- Downloads
- 33
- Likes
- 4
- Rating
- 0
P
PrintablesCats
Crux35 5.3mm flag mount
Hehe should fit any random flag with a 5.3mm shaft
- Downloads
- 33
- Likes
- 1
- Rating
- 0
P
PrintablesRich Moffitt
Lenovo Tiny CX354A PCIe Bracket with LED window
This is a remix of Matthew Neuforth's PCIe bracket for the Mellanox CX354A, adding an LED window. This is a PCIe bracket that can be used on your Lenovo Tiny PC with a Mellanox CX354A (and possibly other 40gbe cards) ⚙ Features Vent holes…
- Downloads
- 32
- Likes
- 4
- Rating
- 0
P
PrintablesCharlie
Crux35 GPS mount Flywoo Goku M10 Nano
between v2 and v3, one is just shorter, and one prints at a offset angle. both seemed to work for me.
- Downloads
- 31
- Likes
- 2
- Rating
- 0
P
PrintablesKar Larsch
M4x35 Senkkopfschraube Teilgewinde für Ender 3 V3 KE
Das ist einer meiner absolut ersten Gehversuche in Fusion 360. Mit dieser Schraube will ich ein manuelles Bedleveling für den Ender 3 V3 KE, der mit fast 1 mm schiefem Bett ausgeliefert wurde, bauen. Dazu passend M4-Muttern im Baumarkt…
- Downloads
- 30
- Likes
- 2
- Rating
- 0
P
PrintablesMog
Cryogrip 350mmx350mm plate for prusa xl
I use a "BIQU CryoGrip Pro Glacier 356x356mm Panda Build Plate for Voron 350" with my prusa xl. To better support in prusa-slicer go to printers tab General section Bed shape click set load xl.svg (comes from the prusa-slicer project and…
- Downloads
- 30
- Likes
- 7
- Rating
- 0
P
PrintablesFilesX
Volador vx35 dual antenna mount small
This is an update to my previous antenna mount for the vx35 frame, I've added pictures to show the weight comparison between this model and the old one. It was advised to position the antenna 90° from each other so here we are. Print at…
- Downloads
- 29
- Likes
- 0
- Rating
- 0
P
PrintablesDanielpohl
cover for a rectangular square tube 35x35
cover and a foot for a rectangular square tube 35x35
- Downloads
- 29
- Likes
- 6
- Rating
- 0
P
PrintablesMehdi
Cable duct 35x35 4mm²
The updated model now has a lower overhang angle (<45°), with the upper part centered and improved sturdiness. 20% infill PLA or PETG No need for support Suits for 4mm² cable M4 screw holes
- Downloads
- 28
- Likes
- 7
- Rating
- 0
P
PrintablesMehdi
Cable duct 25x35 3mm²
The updated model now has a lower overhang angle (<45°), with the upper part centered and improved sturdiness. 20% infill PLA or PETG No need for support Suits for 3mm² cable M4 screw holes
- Downloads
- 28
- Likes
- 9
- Rating
- 0
P
PrintablesSchnipp
PTFE passtrough mounts for 35x35 Aluminum Extrusion
PC4-M10 passthrough fitting mounts for 35x35 Aluminium Extrusions. Print as shown in the Sliced picture, Small hole at the bottom. Supports from Print bed only.
- Downloads
- 26
- Likes
- 5
- Rating
- 0
P
PrintablesMehdi
Cable duct 35x35 2mm²
The updated model now has a lower overhang angle (<45°), with the upper part centered and improved sturdiness. 20% infill PLA or PETG No need for support Suits for 1.5-2mm² cable M4 screw holes
- Downloads
- 25
- Likes
- 8
- Rating
- 0
P
PrintablesjonnieZG
ix35 Cool Box Cover
My original ix35 Cool Box Cover broke because the latch on side snapped in the middle, so I made this one. The door is printed face-down (as oriented in STL). Use the pin-plate to attach the handle to the facing side of door and glue it…
- Downloads
- 24
- Likes
- 5
- Rating
- 0
P
PrintablesMehdi
Cable Duct 25x35 2mm²
The updated model now has a lower overhang angle (<45°), with the upper part centered and improved sturdiness. 20% infill PLA or PETG No need for support Suits for 2mm² cable M4 screw holes
- Downloads
- 24
- Likes
- 9
- Rating
- 0
P
PrintablesArchibaldChesterfieldIII
Lexus RX350 Mounting Plate for Aftermarket Back-Up Reversing Camera (Replaces Toyota part no. 86790)
Recently fit an android head unit to my 07 Lexus RX350 which did not work with the OEM reversing camera. The head unit manufacturer supplied an aftermarket camera however this did not interface with the OEM mounting hardware. This mount…
- Downloads
- 23
- Likes
- 1
- Rating
- 0
P
PrintablesFilesX
Volador vx35 vtx antenna mount
Goes on the last 2 standoffs towards the rear of the frame
- Downloads
- 23
- Likes
- 1
- Rating
- 0
P
PrintablesNeon242
Crux35 Bottom Plate Modded
This base plate mod is an evolution of the exisiting crux35 frame, with a bit more structure added. The exisiting v1 crux35 frame has a couple notable weakspots that were prone to break in a crash. This model aims to fix those issues.…
- Downloads
- 23
- Likes
- 3
- Rating
- 0
P
PrintablesEagle_01
Lexus NX350h XIAMI 14 Ultra wireless charger
My Lexus NX350H has a wireless charger place, but due to the camera bump on my Xiami 14 Ultra, the charger will not work. So here is a solution for any kind of phones with a bump
- Downloads
- 23
- Likes
- 2
- Rating
- 0
P
PrintablesPascal from FDMBoilerRoom
Spulenhalter Germanreprap X350 Pro / Universal Spool Holder for sheet metal
German: Spulenhalter für den X350 von GermanReprap. Einfach zu drucken, verbraucht nicht viel Material und ist ziemlich kompakt. Die 750g Spulen passen perfekt drauf. English: Spool Holder for sheet metal enclosures (0,5-1,5mm thick) or…
- Downloads
- 23
- Likes
- 3
- Rating
- 0
P
Printablespetr.posmurny
krytka světla Hyundai ix35
3D sken originálního dílu, nutno dokoupit O - kroužek jako těsnění
- Downloads
- 22
- Likes
- 2
- Rating
- 0
P
Printables3DMentes
Hammer of god size SX350J box
UNTESTED!! Just made for fun! Print at your own risk ;-) Print Settings Rafts: Doesn't Matter Supports: Yes Category: DIY
- Downloads
- 21
- Likes
- 4
- Rating
- 0