1U Rack Server Wall Mount (Lenovo X3550 M5)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall Mount modeled for a Lenovo X3550 M5 1U Rack Server.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 42
- Makes
- 0
- Views
- 821
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Wall Mount modeled for a Lenovo X3550 M5 1U Rack Server.
You need two of them, just mirror it in the slicer. Go ahead and give it thick layers and many walls, I used 0.32mm layer height and 8 walls.
It's surprisingly strong and the only thing I worry about is the drywall it's mounted to with just 4 25mm wood screws (I know, I know, it's what I had at hand at the time and it's no problem so I'll keep it)
I do not know if this fits any other rack servers , but it's around 20g per piece so I'd say it's worth a try! Please comment and/or post a make if you confirm if it works for your server!
Mounting your server won't be hard, I made screw hole in a good place, screwed the wall mount pieces to my server and then aligned one screw to the hole I made, then lifted the whole thing to level and screwed in one screw on the other side. Then I complemented with the last two screws and was done.
I haven't noticed any detriment from mounting the server on the wall