Counting matching models…
A little disclaimer, this is the first time ever I upload a model, feel free to add positive feedback how to improve :D Since a few months I built myself a little networkcloset and I wanted something to manage the cables so it looks…
A 19" 1U rack mount for the DGS-108 switch from DLink. Both parts are screwed together with a screw and nut. I used M3 bolt and nut. Glue is not needed. It is best printed in PETG or a more stable material, as suggested by the original. I…
This is a front panel for a simple Intellijel-style 1U switched multiple for eurorack synthesizers. As it is relatively small, even basic PLA should be strong enough for this print. 10 HP
I created a version with a 7mm-wide slit (instead of the original 6mm slit) and a model with internal space for cables measuring 34x34mm, compared to the original 26x26mm. EDIT: The model is now parametric, you can change settings as you…
UPDATE: added 2U and 3U panels, designed from scratch. (Not identical to 1U) Bottom layer is very thin, 0.6mm, to keep print times reasonable. 3 Versions: - Hex - Plain - Passthrough (Left and right part) Designed to join together with…
I wanted a cleaner way to run a few cables along my small server rack and made this little part. You just put a velcro cable tie through the middle part to hold cables on. Zip ties would work too, but I don't really like zip ties for such…
If you are here you probably know what this is. Since the original parts ( # B121U0117F ) are quite expensive, and are designed to break every time you have do open up your dash, I designed these ones that you dont need to break in order…
This is a 1U hard drive tray designed to hold two 3.5" HDDs, compatible with 10-inch server or network racks. Category: 3D Printing
Description 10-inch Rack Mount for a MiSTer FPGA with 1U height. Designed for a full stack MiSTer setup, which includes a IO board and a USB board. This mount is compatible both with the original MiSTer FPGA and the MiSTer Pi clone. If…
---> English Lab Rax - 10" - 1U - Lenovo M910q/M720q: Lenovo M910q 10" 1U Mount with 2 mounting screws. Edit (09,20,2025): Added support for the backside I'd be very happy to receive some feedback. :) ---> German Lab Rax - 10" - 1U -…
You can print in one go (for single color printers or hand painters) or you can print in parts (for multicolored prints.) Tested and printed on flashforge AD5X multicolor printer, and assembled after print.
Wanted to incorporate another model in my setup. This time instead of modifying or modeling the rack mount shelf, an existing OpenSCAD library suitable to the purpose was used. Found https://github.com/wildegnux/universal-rack-shelf in…
1U Rack Mount for Topton N5105 i226-V N150 N100 Mini PC
1U 10'' Rack Mouint ienRon 2.5Gb Switch 6 Ports
A custom bracket to mount x16 PCIe cards in the Supermicro Microcloud 5037MR-H8TRF (X9SRD-F and X10DRD-F Nodes) Required parts M4x5mm Truss-head screws - https://amzn.to/4arJtzR WLGQ PCI-E X8 Riser Card - https://amzn.to/4apY8eS
1U Micro PC Rack Mount - Single/Dual Professional rack mounting solution for micro form factor PCs including Intel NUC, Dell OptiPlex Micro, HP EliteDesk Mini, and Lenovo ThinkCentre Tiny. Features: Standard 19" rack compatible Sliding…
Pico + GY-NEO6MV2 GPS Clock - 1U Mini Rack Faceplate Inspired by Jeff Geerling’s video on the Pico GPS Clock , I decided to build my own version tailored for the "1U Mini Rack" system. This faceplate allows you to mount a GPS clock…
un remix de ce support a raspberry Pi 3/4/5 rack 6in avec un écran oled 128x64 remix de https://www.printables.com/model/1173903-raspberry-pi-2b3b4b5b-6-inch-rack-mount/remixes et…
1U 2x 3.5 HDD hot swap bay. Fully 3D printable. Printing: No supports. The cages are printed flat. The bay is printed on front face. Assembly instructions: Mount the 3.5 inch HDD in its cage. Mount the SATA adapter loosely (the distance…
I remixed two models to fit to my purpose. I needed a rack mount for my Netgear GS308EPP and my Raspberry Pi CM4. Therefore I adapted the left rack mount base with some different spacings to fit the GS308EPP (75mm spacing) little loose…
This is a pair of IO shields for the IN-WIN IW-RF100S-S265 1U Short Depth Mini-ITX Rackmount Server Chassis. Both a blank one and a plate with cutouts for a N150 NAS/Router board "10G 2*i226-V 2.5G 3LAN NAS Motherboard" as seen on…
I wasn't happy with the available 10-inch rack mount PDU options, so I created my own. Bill of Materials: 4 x M3x6mm Socket Head Cap Screws 4 x M3x5x4 brass heatset inserts 6-way IEC outlet module:…
Models include stabilizers for the stock Lectric XP2, Lectric XP3, and also the base by itself which rests against the rack spool so you can model your own wheel stabilizer onto it as needed. Note - the base is for the full spool; I…
Remixed from an already great model, just changed the front panel to be in star wars theme
10-inch Mini-Rack - Rail Shim - 1U I created this 3.5mm thick, 1U rail shim for a 10-inch mini-rack to allow mounting thinner steel blanking plates and brackets flush with thicker 3D-printed brackets and blank plates. Typically the metal…
Simple 10 Inch Rack 1U 140mm Fan Mount, uses normal PC Case Fan Screws.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 150.9x150.9mm in size You may print at higher layer heights below the Base Thickness of 0.56mm The Max allowed Thickness is 1.2mm and the Actual…
Wall Mount Bracket for 1U Shelf Designed to securely wall-mount a standard 1U shelf using existing rack mount cage nuts and screws. Heavy-duty bracket can support a fully populated NAS. For safe installation, use appropriate wall anchors…
Metric heat set insert organizer for multiboard drawer
This is a redesign for the PiNAS rackmount parts by mkelements with space for a JetKVM and 2 keystone inserts. I use these to passthrough a 2.5Gbps USB to ethernet converter and the USB input for the JetKVM from the rear. Didn't want any…
I was frustrated by the lack of designer support for the existing models, particularly given the known design issues. As a result, I reverse engineered the files to enable (mostly) parametric design adjustments, resolve known issues, and…
This design was modified to accommodate a redesign I performed on the original intended model. The original design was modified to allow for larger fasteners and embedded nut options to ensure rigidity. This design was updated to reflect…
10'' mini rack holder for Solight PO80B ( https://prepetove-ochrany.heureka.cz/solight-po80b/#prehled/ ) for 10'' mini rack
10-Inch Rack RPi "Blade" System (RPi 5 / NVMe / PoE+) There are countless Raspberry Pi rack mounts online, but when I couldn't find a solution for my specific stack of HATs and hardware, I followed the maker’s credo: If you can't find it,…
This is an insert for an Apache 1800 Case that holds a 1001U amp and low voltage cutout. There is a path for running the speaker wires and the low voltage cutout case is removable for easy wiring. I attached a project from my slicer to…
Made some faceplates to swap out my intellijel Midi 1U module and CVx modules. Both have raised, embedded and blank panels available for download. Have fun!
Was toying with the idea of moving my 1U midi modules into my 3u space, but didn't like the idea of losing a few HP to a 1U to 3U converter. So, I designed this faceplate. It can house 1x MIDI 1U module, and up to 3x CVx modules in one…
KellerLab 's HomeRacker connector with a one-unit offset. Used when the adjacent level (upper or lower) needs to be one unit narrower or wider. Two types: standard and pass-through. UPD: 2026/08/21: added standart type connector. Thanks…
What is it? Its a 1RU dual HDD caddy holder for 10" server racks to support (x2) 3.5" hard drives in a hot-swap configuration. Can be used for modular HomeLab NAS RAID / JBOD setups. HDD Tray Caddy slide and clicks into place along rails…
Made for the racks that depend on holding the rack together with the rack mount equipment
gedruckt mit 0.28mm, 2 Wall, 10% Infill auf Snapmaker U1 mit 59g Filament in 1h 17min
19" 1HE Raspberry (2, 3) Rack Mount, with space for two LEDs (⌀ 5mm) and a tactile button (6mm x 6mm).
This is a modified 1u blanking panel, adjusted to permit the installation of a Thin Mini-ITX IO shield. The reinforced version of this is significantly more rigid. To move the reinforcement rib to the other side of the plate, simply use…
Quick and easy to print cold shoe adapter so you can mount accessories to the FX1/Z1U. Mounts using a 1/4-20 .5" countersunk screw. Printed in black pla with supports. You may be able to get away without using any supports.
1U rack shelf bracket. I wanted to try and design something, and I wanted to add shelves to my rack. Here we are. Print 1 for each corner, add shelving of your choice. Also added a model with a cutout for a 3/4" dowel, useful for extra…
I wanted to use 2 of the 2x3.5" bays from Nautilus Forge , but I wanted to add some labels on the front, so I just made this very simple little cover. You have to install the bottom bay first with just the bottom 2 screws, and then just…
This is a 1U remix of my Raspberry Pi 2U Rack Mount and russross's 1U original design ( https://www.thingiverse.com/thing:4125055 or https://www.printables.com/model/458627-raspberry-pi-4-1u-rackmount-bracket ). The front and rear rail…
This is a 1U shelf designed to mount the HDPLEX 250W GaN Passive AIO ATX Power Supply via the mounting holes on the bottom of it.
Printed with TPU filament 2FS1 https://www.rcsb.org/structure/2FS1 1ULR https://www.rcsb.org/structure/1ULR Stand
ASUS B85M-G R2.0 mATX 1U Rack Mount Tray — 10" Server Rack A custom open-frame 1U rack mount tray designed specifically for the ASUS B85M-G R2.0 micro-ATX motherboard, built to fit a 10" server rack (260×200mm interior). Prints as a…
This is a simple finger duct for a 10 inch rack consisting of 2 parts: the fingers that attach to your choice of rack system, and a cap which fits over the end of the fingers. While you can certainly just sit the cap on the fingers, there…
Best printed face-down. I didn't need any vertical supports, but some brim doesn't hurt. Thank you @Mauker for the model that my work is closely based off of, and thanks to @Cicicok_1379995 and @toggledbits_70767 for the models that came…
A 1U Blank for covering an unused slot in a 10" mini server rack. Materials & Print Settings The model can be printed in any material as it won't handle any load. I've printed mine in PETG, but that was mainly because I printed everything…
A 1U mount for a 200mm Noctua fan for a 10" mini server rack. Materials & Print Settings The model can be printed in any material as it won't handle any real load. I've printed mine in PETG to allow for some flex in the finished print. It…
A 1U mounting bracket for a Unifi Cloud Key gen2+ in a 10" mini server rack. The model includes a backing plate to hold the UCK, it's not needed unless you plan on moving around the server rack a lot. Materials & Print Settings The model…
remodel of the SBC 7 holder ( https://makerworld.com/nl/models/1293865-2u-7-sbc-holder-for-10-rack?from=search#profileId-1324551 ) no more reprinting big 1u modules if 1 conector is wrong on your print, just reprint 1 tiny plate. and keep…
Motivation I wanted to securely mount my Olimex ESP32-POE-ISO-EA and its WiFi/Bluetooth antenna to my Strong FS AV Rack so I could use it as an ESPHome Bluetooth Proxy for the Home Assistant SVS Subwoofer Integration . Solution Design and…
1U 10-inch Multifunction Rack Shelf This is a custom 1U utility shelf designed for 10-inch homelab racks. It consolidates power distribution, UPS backup, and cooling management into a single unit, eliminating cable clutter and "power…
MP-1 Rack mount for 10 inch Racks based on the original 2U version, split in half Print 2 copies to have a fully functional piece.
I wanted to have a simple and protective case on my macropad, so I designed and made this with solidworks. This is for the original “Sweet 16” Macropad from 1up keyboards, modeled based off of using vogon_poetry's base . Settings I used:…
10" rackmount for the HP ProDesk Mini G4. Prints without supports when placed front face down.
1U Rack mounted temperature & humidity sensor. Uses ESPHome to send data to HomeAssistant, but can work also without a network. Mounted to the right side rail. Needs right angled micro usb cord to power, straight ones do not seat properly…
10 inch Rack Mount Blank 1U with Raspberry Pi Logo
Conversion kit to turn an IKEA Jonaxel Shelving Unit (50x51x70 cm) into a 19" rack. This model fits 1U of equipment. Designed to use M5 nuts and bolts to attach to the Jonaxel, and M6 bolts for the rack mount equipment. You will need to…
Printed with Ender 3 V2: Faceplate/Strut/Bowtie/Pins: Overture Starry Blue PETG No Supports Brim 25% Gyroid Infill 4 Walls - Outside to Inside - Alternate extra wall 0.2 Layer Height Sled Parts: Overture Black PLA Pro No Supports No Bed…
This is a small bracket to mount three fans into the side of an 1U device. The item is designed to “grab” onto an 1U appliance, and provide ample cooling to the side of it. This has been created to improve cooling of a Ruckus ICX7250-24P…
This bracket will screw in where the original encoder board was. You can screw in 2 standard arcade push buttons. The smaller buttons are pushed from behind where the original toggle switches were before screwing in the bracket with the…
I use this model to mount a small 8 in. monitor to my server cabinet. Updated 04/03/2025: Tolerance around hinge updated to prevent fusing between parts for print in place model. Included the original file for print in place in case…
Durham Mfg Small Box 9x6 Grid with 1U and 2U Bins. The bins sit slightly proud of the box so that the lid closes securely and small things shouldn't fall out of the bins.
These bushings go on both sides of the hitch lock provided with 1UP hitch-mounted bike racks. In my case I am using the Super Duty rack with a 2" hitch which measures a little over 2.5" outside (64.4mm). I printed these out of TPU with 3…
Update 2024-10-05: I finally got the switch and my original print didn't fit exactly right. So I made a modification to the curve of the main body holding the switch. It should work now. New photos uploaded. Remix of:…
Modified version of Thinkcentre Tiny 1U Rack by Rehpa. I've added slots for the feed, so that they dosen't need to be removed. Also I added a cover in case one slot is left empty.
Summary This is a rack-mount cage system for the Protectli FW4B mini-PC (a popular OPNsense / pfSense router for home-labbers). It is designed to fit either a standard 19-inch server rack or 10-inch mini-rack and take up 1U of rack-space.…
I bought a cheap 1U rack (Techly 306172 Ultra compact 1U) who don't have any 3.5 bay or cage. So i designed a simple cage and glued to the case with some 3M VHB tape.
1U 19 inch rack front panel mount for one 218mm wide switch, one raspberry pi CM4 (with oled display), two 4-port unpowered USB-hubs
This is a remixed new rear bracket for the wonderful Dell Micro 1U Rack Mount. It adds a tray mount for incorporating the two power supply variants I have. Cut outs are provided for fastening using Velcro straps.
I wanted a tray for the ASUS MOCA adaptor . I started with the Raspberry Pi simple tray and using tinkercad I created a stand-in for the ASUS. I then used this to adapt the simple tray.
This mount was design for a 1Up wall-mounted arcade game, but could be used for anything that fits the groove provided. It has provisions for one #10 fastener if left unscaled. Two versions are attached. The STLs are for a low profile…
created this for mounting a raberry pi 3B+ in a rack and have some kind of heat sink attached to it. You may have to redesign the bracket. The holes were design for 3mm screws heated inserts (you may also use a nut instead).
Rackmount your Tado Internet Bridge using the modular 1U Rasberry Pi Rack System. Will need an RJ45 keystone to front-mount the network. You can find cheap plastic ones on Amazon, etc. to clip in. For use with this rackmount system:…
this uses 2 screws to retain each module. it fits the standard 1u rack with little adjustment. i was able to print it on my ender 3. I used like 10 walls so that it was a solid part. it's printed in two parts to fit an ender 3. you will…
1U rackmount, consisting of 4 screwable individual parts for Blackmagic MiniConverter.
Thought I would design a more robust EZ pull handle for the 1up Heavy Duty bike rack. Everything was modeled for standard sized hardware, not metric; If there is enough interest, I can design parts to accommodate metric hardware as well.…
this is a 19" 1u cable manager for your rack You need to glue the top of the cable manager(in the grooves that are printed) to the rest and than you can snap/slide the front in and out of place. it is designed to be glued as to not need…
this is a 19" 1u ventilated blanking plate for your rack Don't use it with something heavy mounted to the other side it is to flexible to hold it at least with commen materials If u need a stronger version look at the reinforded moddel no…
this is a 19" 1u ventilated but reinforced blanking plate for your rack if u want something more ventilated look at the non reinforced version (but i wouldn't connect something heavy to it) no supports needed you can also print something…
Tipp: genug Infill wählen - (zB. 40% Gyroid) Verschraubungen mittels threaded inserts & M3-Schrauben. Keystone-Rj45-Koppler einfach einkleben. Schrauben unter der FortiGate habe ich in meinem Fall weggelassen, da diese platzbedingt leider…
This is 3Dprint1UPu's model that has been painted for MMU printing. You should just be able to slice and print. Everything has been taken care of.
Remix of a remix. Fits the Beelink Mini S12 Pro. Have not tested with the non-pro model, but I imagine it works all the same. Friction fit so it is tight and doesn't move around once it's in place. Can use just the blank bracket mount to…
A little disclaimer, this is the first time ever I upload a model, feel free to add positive feedback how to improve :D Since a few months I built myself a little networkcloset and I wanted something to manage the cables so it looks…
A minimalistic under shelf/desk mount for 1U devices. Admittedly, it's a bit fiddly to mount, at least if you cannot remove the shelf and screw on the corners with the shelf turned upside down. There's enough space for ventilation and the…
What is JetKVM? https://www.kickstarter.com/projects/jetkvm/jetkvm?ref=5sxcqi What is this? Mount JetKVM on 1U server rack with M2 screw. What are the features? Designed for JetKVM Original screw holes It can be installed either to the…
Made adapters for NORCO RL-20 1U sliding rails. Fits perfectly. Downside that rails are too short and for maintenance I need to slide server fully out. For each side you need to print one front and one rear peace. Rails:…
Two versions created - one where the PSU is centered on the rail, another where the PSU is offset to one side. Print a pair of brackets, and a pair of the DIN rail mounting tabs from…
