1 / 6
10 inch rack 1U - 3.5 inch hot swap — image 1
1 / 6

10 inch rack 1U - 3.5 inch hot swap

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Fully 3D printable 2x hot swap bay for 3.5 inch HDD's

Rating
4.5 / 5
Likes
39
Downloads
200
Makes
1
Views
1,662
Reviews
2

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial

1U 2x 3.5 HDD hot swap bay.

Fully 3D printable. 

Printing:
  • No supports.

  • The cages are printed flat.

  • The bay is printed on front face. 

Assembly instructions: 
  1. Mount the 3.5 inch HDD in its cage.

  2. Mount the SATA adapter loosely (the distance between the mounting holes is slightly larger than the minimum required for some wiggle room).

  3. Insert the cage with the HDD mounted in the bay so it connects with the SATA adapter. 

  4. Tighten the SATA adapter.

SDD version is coming up!

If you have any requests or feedback, feel free to leave a comment and I'll try my best!

Parts list: 
  • 8x M3 x 5mm flat head HDD mounting screw

  • 4x M3 x 10mm for mounting the SATA adapter

  • 2x Sata adapters

    Link to the SATA adapters i used: https://a.aliexpress.com/_EvHNbBA

Tags