10 inch rack 1U - 3.5 inch hot swap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fully 3D printable 2x hot swap bay for 3.5 inch HDD's
- Ocena
- 4,5 / 5
- Polubienia
- 39
- Pobrania
- 200
- Wydruki
- 1
- Wyświetlenia
- 1662
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
1U 2x 3.5 HDD hot swap bay.
Fully 3D printable.
Printing:
No supports.
The cages are printed flat.
The bay is printed on front face.
Assembly instructions:
Mount the 3.5 inch HDD in its cage.
Mount the SATA adapter loosely (the distance between the mounting holes is slightly larger than the minimum required for some wiggle room).
Insert the cage with the HDD mounted in the bay so it connects with the SATA adapter.
Tighten the SATA adapter.
SDD version is coming up!
If you have any requests or feedback, feel free to leave a comment and I'll try my best!
Parts list:
8x M3 x 5mm flat head HDD mounting screw

4x M3 x 10mm for mounting the SATA adapter

2x Sata adapters

Link to the SATA adapters i used: https://a.aliexpress.com/_EvHNbBA