1 / 1
1U RPi 5 10" rack mount plate with JetKVM for PiNAS — image 1

1U RPi 5 10" rack mount plate with JetKVM for PiNAS

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

1U RPi 5 10" rack mount plate with JetKVM for PiNAS. This is for the PiNAS rackmount parts by mkelements.

Rating
0 / 5
Likes
0
Downloads
11
Makes
0
Views
230
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial

This is a redesign for the PiNAS rackmount parts by mkelements with space for a JetKVM and 2 keystone inserts. I use these to passthrough a 2.5Gbps USB to ethernet converter and the USB input for the JetKVM from the rear. Didn't want any holes hanging around, and I really wanted the front panel to look nice.

Has a space cutout in the rear to allow easier access to the SD card in case removal/reflash etc. is necessary. Using short 5 and 6 inch USB-A to C cables to the keystones.

Cable in the photo has a bit of wonkiness to it (what with the weird label and all) mainly to remind myself which orientation to plug in the USB-C. Apparently the OS on the Pi only lets 1Gbps run through when the USB-C (!) cable is inserted in one orientation, while allowing 2.5Gbps in the reversed orientation (go figure!).

Tags