1 / 1
1U RPi 5 10" rack mount plate with JetKVM for PiNAS — zdjęcie 1

1U RPi 5 10" rack mount plate with JetKVM for PiNAS

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

1U RPi 5 10" rack mount plate with JetKVM for PiNAS. This is for the PiNAS rackmount parts by mkelements.

Ocena
0 / 5
Polubienia
0
Pobrania
11
Wydruki
0
Wyświetlenia
230
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial

This is a redesign for the PiNAS rackmount parts by mkelements with space for a JetKVM and 2 keystone inserts. I use these to passthrough a 2.5Gbps USB to ethernet converter and the USB input for the JetKVM from the rear. Didn't want any holes hanging around, and I really wanted the front panel to look nice.

Has a space cutout in the rear to allow easier access to the SD card in case removal/reflash etc. is necessary. Using short 5 and 6 inch USB-A to C cables to the keystones.

Cable in the photo has a bit of wonkiness to it (what with the weird label and all) mainly to remind myself which orientation to plug in the USB-C. Apparently the OS on the Pi only lets 1Gbps run through when the USB-C (!) cable is inserted in one orientation, while allowing 2.5Gbps in the reversed orientation (go figure!).

Tagi