1U Rack Server Wall Mount (Lenovo X3550 M5)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall Mount modeled for a Lenovo X3550 M5 1U Rack Server.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 821
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Wall Mount modeled for a Lenovo X3550 M5 1U Rack Server.
You need two of them, just mirror it in the slicer. Go ahead and give it thick layers and many walls, I used 0.32mm layer height and 8 walls.
It's surprisingly strong and the only thing I worry about is the drywall it's mounted to with just 4 25mm wood screws (I know, I know, it's what I had at hand at the time and it's no problem so I'll keep it)
I do not know if this fits any other rack servers , but it's around 20g per piece so I'd say it's worth a try! Please comment and/or post a make if you confirm if it works for your server!
Mounting your server won't be hard, I made screw hole in a good place, screwed the wall mount pieces to my server and then aligned one screw to the hole I made, then lifted the whole thing to level and screwed in one screw on the other side. Then I complemented with the last two screws and was done.
I haven't noticed any detriment from mounting the server on the wall