Cryogrip 350mmx350mm plate for prusa xl
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cryogrip build plate and gcode to better support its use on the prusa xl.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 30
- Makes
- 0
- Views
- 551
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v3.0
I use a "BIQU CryoGrip Pro Glacier 356x356mm Panda Build Plate for Voron 350" with my prusa xl. To better support in prusa-slicer
- go to printers tab
- General section
- Bed shape click set
- load xl.svg (comes from the prusa-slicer project and i didn't make) as the texture
- load cryogrip.stl as the model
- click ok
- save
- click custom g-code
- edit start-gcode
- replace all lines from purge first tool to the very end with whats below.
- That's it!
Additionally you can change bed temps per filament to a lower number and enjoy power efficiency.
;
; purge first tool
;
G1 F{travel_speed * 60}
P0 S1 L2 D0; park the tool
M109 T0 S{first_layer_temperature[0]}
T0 S1 L0 D0; pick the tool
G92 E0 ; reset extruder positionG0 X84 Y-7 Z10 F{(travel_speed * 60)} ; move close to the sheet's edge
G0 E{if is_nil(filament_multitool_ramming[0])}10{else}30{endif} X94 Z0.2 F{if is_nil(filament_multitool_ramming[0])}500{else}170{endif} ; purge while moving towards the sheet
G0 X114 E9 F800 ; continue purging and wipe the nozzle
G0 X117 Z0.05 F8000 ; wipe, move close to the bed
G0 X120 Z0.2 F8000 ; wipe, move quickly away from the bed
G1 E{-retract_length_toolchange[0]} F2400 ; retract
{e_retracted[0] = retract_length_toolchange[0]}
G92 E0 ; reset extruder position
M104 S{(is_nil(idle_temperature[0]) ? (first_layer_temperature[0] + standby_temperature_delta) : (idle_temperature[0]))} T0
{endif}
{if (is_extruder_used[1]) and initial_tool != 1}
;
; purge second tool
;
G1 F{travel_speed * 60}
P0 S1 L2 D0; park the tool
M109 T1 S{first_layer_temperature[1]}
T1 S1 L0 D0; pick the tool
G92 E0 ; reset extruder position
G0 X84 Y-4.5 Z10 F{(travel_speed * 60)} ; move close to the sheet's edge
G0 E{if is_nil(filament_multitool_ramming[1])}10{else}30{endif} X94 Z0.2 F{if is_nil(filament_multitool_ramming[1])}500{else}170{endif} ; purge while moving towards the sheet
G0 X114 E9 F800 ; continue purging and wipe the nozzle
G0 X117 Z0.05 F8000 ; wipe, move close to the bed
G0 X120 Z0.2 F8000 ; wipe, move quickly away from the bed
G1 E{-retract_length_toolchange[1]} F2400 ; retract
{e_retracted[1] = retract_length_toolchange[1]}
G92 E0 ; reset extruder position
M104 S{(is_nil(idle_temperature[1]) ? (first_layer_temperature[1] + standby_temperature_delta) : (idle_temperature[1]))} T1
{endif}
{if (is_extruder_used[2]) and initial_tool != 2}
;
; purge third tool
;
G1 F{travel_speed * 60}
P0 S1 L2 D0; park the tool
M109 T2 S{first_layer_temperature[2]}
T2 S1 L0 D0; pick the tool
G92 E0 ; reset extruder position
G0 X284 Y-7 Z10 F{(travel_speed * 60)} ; move close to the sheet's edge
G0 E{if is_nil(filament_multitool_ramming[2])}10{else}30{endif} X274 Z0.2 F{if is_nil(filament_multitool_ramming[2])}500{else}170{endif} ; purge while moving towards the sheet
G0 X244 E9 F800 ; continue purging and wipe the nozzle
G0 X241 Z0.05 F8000 ; wipe, move close to the bed
G0 X238 Z0.2 F8000 ; wipe, move quickly away from the bed
G1 E{-retract_length_toolchange[2]} F2400 ; retract
{e_retracted[2] = retract_length_toolchange[2]}
G92 E0 ; reset extruder position
M104 S{(is_nil(idle_temperature[2]) ? (first_layer_temperature[2] + standby_temperature_delta) : (idle_temperature[2]))} T2
{endif}
{if (is_extruder_used[3]) and initial_tool != 3}
;
; purge fourth tool
;
G1 F{travel_speed * 60}
P0 S1 L2 D0; park the tool
M109 T3 S{first_layer_temperature[3]}
T3 S1 L0 D0; pick the tool
G92 E0 ; reset extruder position
G0 X284 Y-4.5 Z10 F{(travel_speed * 60)} ; move close to the sheet's edge
G0 E{if is_nil(filament_multitool_ramming[3])}10{else}30{endif} X274 Z0.2 F{if is_nil(filament_multitool_ramming[3])}500{else}170{endif} ; purge while moving towards the sheet
G0 X244 E9 F800 ; continue purging and wipe the nozzle
G0 X241 Z0.05 F8000 ; wipe, move close to the bed
G0 X238 Z0.2 F8000 ; wipe, move quickly away from the bed
G1 E{-retract_length_toolchange[3]} F2400 ; retract
{e_retracted[3] = retract_length_toolchange[3]}
G92 E0 ; reset extruder position
M104 S{(is_nil(idle_temperature[3]) ? (first_layer_temperature[3] + standby_temperature_delta) : (idle_temperature[3]))} T3
{endif}
{if (is_extruder_used[4]) and initial_tool != 4}
;
; purge fifth tool
;
G1 F{travel_speed * 60}
P0 S1 L2 D0; park the tool
M109 T4 S{first_layer_temperature[4]}
T4 S1 L0 D0; pick the tool
G92 E0 ; reset extruder position
G0 X284 Y-1.5 Z10 F{(travel_speed * 60)} ; move close to the sheet's edge
G0 E{if is_nil(filament_multitool_ramming[4])}10{else}30{endif} X274 Z0.2 F{if is_nil(filament_multitool_ramming[4])}500{else}170{endif} ; purge while moving towards the sheet
G0 X244 E9 F800 ; continue purging and wipe the nozzle
G0 X241 Z0.05 F8000 ; wipe, move close to the bed
G0 X238 Z0.2 F8000 ; wipe, move quickly away from the bed
G1 E{-retract_length_toolchange[4]} F2400 ; retract
{e_retracted[4] = retract_length_toolchange[4]}
G92 E0 ; reset extruder position
M104 S{(is_nil(idle_temperature[4]) ? (first_layer_temperature[4] + standby_temperature_delta) : (idle_temperature[4]))} T4
{endif}
;
; purge initial tool
;
G1 F{travel_speed * 60}
P0 S1 L2 D0; park the tool
M109 T{initial_tool} S{first_layer_temperature[initial_tool]}
T{initial_tool} S1 L0 D0; pick the tool
G92 E0 ; reset extruder position
G0 X{(initial_tool == 0 ? 84 : (initial_tool == 1 ? 84 : 284))} Y{(initial_tool == 0 ? -7 : (initial_tool == 1 ? -4.5 : (initial_tool == 2 ? -7 :(initial_tool == 3 ? -4.5 : -1.5))))} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge
G0 E{if is_nil(filament_multitool_ramming[initial_tool])}10{else}30{endif} X{(initial_tool == 0 ? 94 : (initial_tool == 1 ? 94 : 274))} Z0.2 F{if is_nil(filament_multitool_ramming[initial_tool])}500{else}170{endif} ; purge while moving towards the sheet
G0 X{(initial_tool == 0 ? 114 : (initial_tool == 1 ? 114 : 244))} E9 F800 ; continue purging and wipe the nozzle
G0 X{(initial_tool == 0 ? 117 : (initial_tool == 1 ? 117: 241))} Z{0.05} F{8000} ; wipe, move close to the bed
G0 X{(initial_tool == 0 ? 120 : (initial_tool == 1 ? 120 : 249))} Z0.2 F{8000} ; wipe, move quickly away from the bed
G1 E-{retract_length[initial_tool]} F2400 ; retract
{e_retracted[initial_tool] = retract_length[initial_tool]}
G92 E0 ; reset extruder position
there