1 / 3
Cryogrip 350mmx350mm plate for prusa xl — zdjęcie 1
1 / 3

Cryogrip 350mmx350mm plate for prusa xl

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Cryogrip build plate and gcode to better support its use on the prusa xl.

Ocena
0 / 5
Polubienia
7
Pobrania
30
Wydruki
0
Wyświetlenia
551
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

I use a "BIQU CryoGrip Pro Glacier 356x356mm Panda Build Plate for Voron 350" with my prusa xl. To better support in prusa-slicer

  1. go to printers tab
  2. General section
  3. Bed shape click set
  4. load xl.svg (comes from the prusa-slicer project and i didn't make) as the texture
  5. load cryogrip.stl as the model
  6. click ok
  7. save
  8. click custom g-code
  9. edit start-gcode
  10. replace all lines from  purge first tool to the very end with whats below.
  11. That's it!

Additionally you can change bed temps per filament to a lower number and enjoy power efficiency.

;
; purge first tool
;
G1 F{travel_speed * 60}
P0 S1 L2 D0; park the tool
M109 T0 S{first_layer_temperature[0]}
T0 S1 L0 D0; pick the tool
G92 E0 ; reset extruder position

G0 X84 Y-7 Z10 F{(travel_speed * 60)} ; move close to the sheet's edge G0 E{if is_nil(filament_multitool_ramming[0])}10{else}30{endif} X94 Z0.2 F{if is_nil(filament_multitool_ramming[0])}500{else}170{endif} ; purge while moving towards the sheet G0 X114 E9 F800 ; continue purging and wipe the nozzle G0 X117 Z0.05 F8000 ; wipe, move close to the bed G0 X120 Z0.2 F8000 ; wipe, move quickly away from the bed G1 E{-retract_length_toolchange[0]} F2400 ; retract {e_retracted[0] = retract_length_toolchange[0]} G92 E0 ; reset extruder position

M104 S{(is_nil(idle_temperature[0]) ? (first_layer_temperature[0] + standby_temperature_delta) : (idle_temperature[0]))} T0

{endif} {if (is_extruder_used[1]) and initial_tool != 1} ; ; purge second tool ; G1 F{travel_speed * 60} P0 S1 L2 D0; park the tool M109 T1 S{first_layer_temperature[1]} T1 S1 L0 D0; pick the tool G92 E0 ; reset extruder position

G0 X84 Y-4.5 Z10 F{(travel_speed * 60)} ; move close to the sheet's edge G0 E{if is_nil(filament_multitool_ramming[1])}10{else}30{endif} X94 Z0.2 F{if is_nil(filament_multitool_ramming[1])}500{else}170{endif} ; purge while moving towards the sheet G0 X114 E9 F800 ; continue purging and wipe the nozzle G0 X117 Z0.05 F8000 ; wipe, move close to the bed G0 X120 Z0.2 F8000 ; wipe, move quickly away from the bed G1 E{-retract_length_toolchange[1]} F2400 ; retract {e_retracted[1] = retract_length_toolchange[1]} G92 E0 ; reset extruder position

M104 S{(is_nil(idle_temperature[1]) ? (first_layer_temperature[1] + standby_temperature_delta) : (idle_temperature[1]))} T1

{endif} {if (is_extruder_used[2]) and initial_tool != 2} ; ; purge third tool ; G1 F{travel_speed * 60} P0 S1 L2 D0; park the tool M109 T2 S{first_layer_temperature[2]} T2 S1 L0 D0; pick the tool G92 E0 ; reset extruder position

G0 X284 Y-7 Z10 F{(travel_speed * 60)} ; move close to the sheet's edge G0 E{if is_nil(filament_multitool_ramming[2])}10{else}30{endif} X274 Z0.2 F{if is_nil(filament_multitool_ramming[2])}500{else}170{endif} ; purge while moving towards the sheet G0 X244 E9 F800 ; continue purging and wipe the nozzle G0 X241 Z0.05 F8000 ; wipe, move close to the bed G0 X238 Z0.2 F8000 ; wipe, move quickly away from the bed G1 E{-retract_length_toolchange[2]} F2400 ; retract {e_retracted[2] = retract_length_toolchange[2]} G92 E0 ; reset extruder position

M104 S{(is_nil(idle_temperature[2]) ? (first_layer_temperature[2] + standby_temperature_delta) : (idle_temperature[2]))} T2

{endif} {if (is_extruder_used[3]) and initial_tool != 3} ; ; purge fourth tool ; G1 F{travel_speed * 60} P0 S1 L2 D0; park the tool M109 T3 S{first_layer_temperature[3]} T3 S1 L0 D0; pick the tool G92 E0 ; reset extruder position

G0 X284 Y-4.5 Z10 F{(travel_speed * 60)} ; move close to the sheet's edge G0 E{if is_nil(filament_multitool_ramming[3])}10{else}30{endif} X274 Z0.2 F{if is_nil(filament_multitool_ramming[3])}500{else}170{endif} ; purge while moving towards the sheet G0 X244 E9 F800 ; continue purging and wipe the nozzle G0 X241 Z0.05 F8000 ; wipe, move close to the bed G0 X238 Z0.2 F8000 ; wipe, move quickly away from the bed G1 E{-retract_length_toolchange[3]} F2400 ; retract {e_retracted[3] = retract_length_toolchange[3]} G92 E0 ; reset extruder position

M104 S{(is_nil(idle_temperature[3]) ? (first_layer_temperature[3] + standby_temperature_delta) : (idle_temperature[3]))} T3

{endif} {if (is_extruder_used[4]) and initial_tool != 4} ; ; purge fifth tool ; G1 F{travel_speed * 60} P0 S1 L2 D0; park the tool M109 T4 S{first_layer_temperature[4]} T4 S1 L0 D0; pick the tool G92 E0 ; reset extruder position

G0 X284 Y-1.5 Z10 F{(travel_speed * 60)} ; move close to the sheet's edge G0 E{if is_nil(filament_multitool_ramming[4])}10{else}30{endif} X274 Z0.2 F{if is_nil(filament_multitool_ramming[4])}500{else}170{endif} ; purge while moving towards the sheet G0 X244 E9 F800 ; continue purging and wipe the nozzle G0 X241 Z0.05 F8000 ; wipe, move close to the bed G0 X238 Z0.2 F8000 ; wipe, move quickly away from the bed G1 E{-retract_length_toolchange[4]} F2400 ; retract {e_retracted[4] = retract_length_toolchange[4]} G92 E0 ; reset extruder position

M104 S{(is_nil(idle_temperature[4]) ? (first_layer_temperature[4] + standby_temperature_delta) : (idle_temperature[4]))} T4

{endif} ; ; purge initial tool ; G1 F{travel_speed * 60} P0 S1 L2 D0; park the tool M109 T{initial_tool} S{first_layer_temperature[initial_tool]} T{initial_tool} S1 L0 D0; pick the tool G92 E0 ; reset extruder position

G0 X{(initial_tool == 0 ? 84 : (initial_tool == 1 ? 84 : 284))} Y{(initial_tool == 0 ? -7 : (initial_tool == 1 ? -4.5 : (initial_tool == 2 ? -7 :(initial_tool == 3 ? -4.5 : -1.5))))} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge G0 E{if is_nil(filament_multitool_ramming[initial_tool])}10{else}30{endif} X{(initial_tool == 0 ? 94 : (initial_tool == 1 ? 94 : 274))} Z0.2 F{if is_nil(filament_multitool_ramming[initial_tool])}500{else}170{endif} ; purge while moving towards the sheet G0 X{(initial_tool == 0 ? 114 : (initial_tool == 1 ? 114 : 244))} E9 F800 ; continue purging and wipe the nozzle G0 X{(initial_tool == 0 ? 117 : (initial_tool == 1 ? 117: 241))} Z{0.05} F{8000} ; wipe, move close to the bed G0 X{(initial_tool == 0 ? 120 : (initial_tool == 1 ? 120 : 249))} Z0.2 F{8000} ; wipe, move quickly away from the bed G1 E-{retract_length[initial_tool]} F2400 ; retract {e_retracted[initial_tool] = retract_length[initial_tool]}

G92 E0 ; reset extruder position

there

 

 

Tagi