Volador vx35 dual antenna mount small
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a tpu rx + vtx dual antenna mount for the vx35 frame.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 29
- Makes
- 0
- Views
- 258
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Public Domain
This is an update to my previous antenna mount for the vx35 frame, I've added pictures to show the weight comparison between this model and the old one. It was advised to position the antenna 90° from each other so here we are.
Print at 100% Infill since it is already very small.
I have the vtx spun around (see pictures) and I must admit it's not the easiest thing to route these antenna cables but well worth it. My procedure was to disconnect the antenna, insert them into the mount, then reconnect them to the vtx. From there you route the cables under the vtx and bolt it to the frame, remove rear standoffs and insert through tpu, bolt stand-offs to frame, then route the rx antennas through the tpu. Good luck!
