Counting matching models…
Crashing my Volador VX3 FPV quadcopter repeatedly caused my camera to change angle or get damaged, so I designed this thing. It fits Walksnail Moonlight with filter, or any other 19 mm FPV camera at fixed angle of 30°. Integrated lens…
Project: fernmoon.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x100mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is…
Crashing my Volador VX3 FPV quadcopter repeatedly caused my camera to change angle or get damaged, so I designed this thing. It fits Walksnail Moonlight with filter, or any other 19 mm FPV camera at fixed angle of 30°. Integrated lens…
This is a hard mount designed for printing in PETG. Do not use a soft mount with the Moonlight, as it will significantly worsen jello artefacts. Switching to a hard mount will resolve this issue. The holes have been adjusted to allow the…
This the new version of my Moonlight camera mount for the GEPRC Smart35
Introducing the Moonlight Tiara, a beautifully crafted 3D printed piece in PLA, designed to bring a touch of enchantment to your costume collection. Designed to be printed with ease, it requires support to maintain its delicate features…
These side plates are designed for my iFlight Nazgul Eco DC 5" FPV drone to protect the electronics from debris while providing easy access to the FC's USB port and the VTX's SD card slot. At the front, there is a space for the Vifly GPS…
Project: fernmoon.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x100mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is…
Fuselage is a consumable. I cannot imagine remaking it every time I break my plane, so I've created this conversion. You only need to cut of original camera mount, bit more inside (everything shown on the photos) and a separator under…
Box for base ND 8, 16, 32 filters and one spare or camera cover for walksnail moonlight camera Hinge with filament 1,75
Print in TPU 98 100% infill Organic support Use appropriate m2 screws and nuts Dont screw the vtx directly on the frame, leave it loose.
CaddxFPV Walksnail Moonlight VTX Mount for TBS Source One V5 Made possible with @Dtuned_2160698 Features: Full protection of the Moonlight Support dual antennae setup Cutouts for port access Slit and zip tie step for easy and flexible…
FlyFishRC Volador 2 VX5 - dual antenna holder (Waksnail Moonlight Kit)
Just a simple mount for the Walksnail VTX and new Caddx GM3 Gimbal that you can use or modify to fit your needs. It has an additional mount for 40mm cooling fan, because the Moonlight VTX heats up very quickly without an active airflow.…
Walksnail Moonlight VTX & Camera Mount for the Pavo 25V2. Camera: Camera mount assures free camera view with Filter. ND Filter is accessible. Camera angle ajustable in place. It holds a Goku nano GPS. I think that this build provides a…
That's my variant of the original canopy. I've added holder for 2 antennas and a GPS. Printed in TPU, will see how it holds. GPS used: Foxeer M10Q-120 ← this is my go to for small quads. Amazing performance.…
The Moonlight Greatsword from Dark Souls 1 as a Dummy 13 weapon. Printable without AMS. This sword, one of the rare dragon weapons, came from the tail of Seath the Scaleless, the pale white dragon who betrayed his own. “Seath is the…
The Holy Moonlight Sword trick weapon from Bloodborne, scaled to be a Dummy 13 weapon. The outer blade slides over the inner blade, allowing the weapon to “transform”. Printable without AMS. An arcane sword discovered long ago by Ludwig.…
Holder for 3 Moonlight Lens There are also holes for magnets to securely hold the lid. on the photos MJF printing previo
This is what I came up with to mount a Walksnail Moonlight vtx into my Rubberquads Squirrel frame. It's not the most elegant print but it does the job. It requires forogoing one standoff from the back part, and instead using a self…
The AOS 5 V5 frame is renowned for its advanced anti-vibration technology and durable, yet overly cumbersome, 7075 aluminum camera cage. AOS RC Pilots often encounter challenges when mounting cameras like the Walksnail Moonlight system,…
I printed mine in TPU. Fits ND filters. Enjoy! *If you want it to be sub 250g you can use 720mah 4s batteries with a thinned out “guard” and smaller antennas. Mine weighs in at 249g and gets 2.5-3.5 min flight time
The Walksnail Moonlight Mount is a -designed holder for attaching the Walksnail Moonlight Kit camera to the Mobula 8 O3 drone. This mount ensures a secure fit and optimal camera placement for smooth, stable FPV footage during flights. ✅…
Walksnail Moonlight nd filter adapter (beta) um den filter zu schützen!
Print with LW PLA or your preferred filament. I used Inland LW PLA Orientation is laying so camera is up 2 shell 15% infill 4 top layers 4 bottom layers Slim Tree Support Buy me a coffee if you want, thanks for the support!…
LED USB 5V Lamp - Customizable Circular Decoration Add a unique touch to your interior with this elegant circular LED lamp on a stand. Powered by a 5V USB, it features a white ring designed to diffuse soft and even light. An integrated…
The textured moon was remixed from Wolf howling at the moon by Jonn2k - Thingiverse . The lithophane must be printed at 100% infill to get the proper effect. The cat and branch came from thingiverse but the link is no longer working…
Piece to mount XT60 and two moonlight unit antennas. You just need 2 zipties to mount the antenna. Print in TPU, walls count and infill density really deopends on Your material and how hard part You want. I use TPU varioshore at high…
Pumpkin 7 DC drone frame need special holder for Walksnail Moonlight 4k Camera : Camera Holder made from TPU Material TPU: Print time about 1h (fine quality) Print speed 30-40mm/s Bed temperature 40 C Extruder temperature 228 C Infill 8%…
The main body of this canopy secures the antennas and camera to the frame. I printed this portion with PETG-CF, although any PETG or ABS should be fine. Use 4x m2 heat set inserts (2 mm tall) for the mounting holes. The TPU bumper is…
This is a replacement VTX cage for the Pavo20 Pro frame. I bought the frame to build my own version using the Walksnail Moonlight Kit, since that’s the FPV system I prefer. The cage is fairly robust, with a dry weight on the drone coming…
GEPRC GEP-CB5 камера Walksnail Moonlight 4k з можливістю зміни кута нахилу. If you have any comments about the models, write them in the comments, I can fix them without any problems.
This is model of antenna mount for Walksnail Moonlight - designated for Speedybee Mario 5 drone frame. Question :Why there is no place for GPS at the end of the antenna mount ? Answer: For better load distribution and better GPS signal…
🪟🌙 Stained Glass Moonlight Lantern – Snap-Fit Book Nook or Desktop Decor Light up your shelf, your desk, and maybe even your soul with this celestial-inspired stained glass lantern. This piece combines a soft arched silhouette with a…
Walksnail Moonlight ND filter protector that doesn’t block the camera view and provides extra protection. The design is not perfect but definitely useful. It might not fit every frame. Designed for the Mario 5 frame. Print Settings…
The best printing position is upright and slightly diagonal, just let the slicer figure out the best position :-) Use supports, especially if you are printing with TPU. You will need loads of supports because the model is tall (upright),…
Step into a shadowy Halloween past with Rocking Alone in the Moonlight , a spine-tingling Hueforge STL from Manic 3D Prints. This eerie art print features a porcelain doll seated in an old wooden rocking chair, lit only by a flickering…
Selis Everlight, Champion of Light. From Moonlight Castle and The Abysswalkers
Selis Everlight, Champion of Light. From Moonlight Castle and The Abysswalkers
Dont use this use the new model! :) use this one instead https://www.printables.com/model/1378393-hard-mount-for-walksnail-moonlight-fixes-jello in my testing softer mount made the issue worse not better! turns out after some testing hard…
Struggling with long GPS lock times? This simple but effective VTX antenna extender is designed to physically separate your VTX antenna from the GPS module on your Speedy Bee Master 5 V4 . By increasing the distance between the two…
Fits onto the antenna for a Walksnail Moonlight VTX. Just add a couple dabs off glue and you are ready to get back to crashing
This is a hard mount designed for printing in PETG. Do not use a soft mount with the Moonlight, as it will significantly worsen jello artefacts. Switching to a hard mount will resolve this issue. The holes have been adjusted to allow the…
This the new version of my Moonlight camera mount for the GEPRC Smart35
beta Print Settings Printer Brand: Creality Printer: Ender-3 V3 KE Rafts: Yes Supports: Yes Resolution: 0.1 Infill: 50-80% Filament: sunlu tpu or pla Black Notes: This is a beta Category: 3D Printer Accessories
Pavo 20 Pro Nightfire Limited Edition Canopy for Walksnail Moonlight VTX. Please note that i have not tested the Nighfire version yet. Please provide feedback if you happen to print it before i do. Category: Other
When building the GEPRC CineLog35V2 FPV Drone, I was really disappointed that the Walksnail Moonlight VTX would fit, but I wouldn't have access to the MicroSD - furthermore, cables on the AiO board were touched by the VTX' metal casing.…
adapted frame to fit the moonlight inside the cinelog 25v2 print ir in PLA with 4 Wall loop and 25/ infill
🌙✨ Moonlight Fairy Houses – Enchanted Lunar Dwellings for Your Miniature World! ✨🌙 Bring a touch of celestial magic to your prints with these two whimsical Moonlight Fairy Houses , designed with stargazers and dreamers in mind. Each house…
U99 Moonlight Whoopのために作ったパーツです すべてTPU95A レンズプロテクターはt4obrienのデザインをべーすしたものです。ウォールライン数１、インフィル密度10％（キュービック） ケージはウォールライン数３、インフィル密度２０％ ばねはインフィル密度１００％
A New V2 based on this design can be found here: This is a custom head design for a walksnail Moonlight VTX for the SpeedyBee Master 3X quad. It should also be compatible with the Bee25 however I haven't tested it. The antenna mount is…
Bring a soft, enchanting glow into your home with the Moonlight Cat LED Holder . This 3D printed piece combines the graceful silhouette of a cat with a practical candle holder tucked into its back. Designed for LED candles, it creates a…
I made a few modifications to the design of Krasimir and Taroh .
Walksnail Moonlight VTX holder and duel antenna mount / TBS crossfire T mount, will need to mirror one for left and right / HGLRC mini GPS mount. All printed in TPU. Support the avatar antenna with 44 degree support for the top portion…
Introducing the Moonlight Tiara, a beautifully crafted 3D printed piece in PLA, designed to bring a touch of enchantment to your costume collection. Designed to be printed with ease, it requires support to maintain its delicate features…
Mount for walksnail moonlight camera and VTX. Uses TPU parts to reduce vibrations. Can be angled at many different positions. Advantage over screw adjustment is that you always have the exact same angle each time you mount the camera, no…
Full Image Catalog The complete gallery of my works can be found at www.marjers.com You can search by the file’s reference number or simply click the preview image to open it directly. Print setup Infill: 100% (solid) Layer height: 0.08…
Full Image Catalog The complete gallery of my works can be found at www.marjers.com You can search by the file’s reference number or simply click the preview image to open it directly. Print setup Infill: 100% (solid) Layer height: 0.08…
ZOHD Altus – Magnetic Nose for Walksnail Moonlight This 3D-printed nose is designed specifically for the ZOHD Altus FPV aircraft. It provides a dedicated mount for the Walksnail Moonlight unit (camera + VTX) and attaches magnetically to…
This adorable gnome has found the perfect spot to rest — perched on a crescent moon, holding a little star close. With his oversized hat and peaceful pose, he brings a sense of calm and wonder to any space. Perfect as a whimsical…
This is a digital STL file – print-ready and high quality. The Holy Moonlight Greatsword (Sword of Moonlight) is one of FromSoftware’s most iconic weapons, appearing in Demon’s Souls, Dark Souls I–III, Bloodborne, and Sekiro . This…
Print in TPU (I used 20% cubic infill). I only use the top screw mount, friction is enough, and you can adjust camera angle that way. M3 hex nuts will work (see original model from @Krhom!), but you might have to hold them in place with…
A remix of an awesome model to hold the Walksnail Moonlight VTX that fits the Apex 5 HD frames using the standoffs so no screws are needed. Made shorter in height to fit inside an Apex 5 HD frame. Removed some material in a few places to…
I used 12mm and 25mm standoffs in order to accomodate the increased height of the VTX
These side plates are designed for my iFlight Nazgul Eco DC 5" FPV drone to protect the electronics from debris while providing easy access to the FC's USB port and the VTX's SD card slot. At the front, there is a space for the Vifly GPS…
If you downloaded the model, it means you are interested in it. Don't forget to like it, please!
Fuselage is a consumable. I cannot imagine remaking it every time I break my plane, so I've created this conversion. You only need to cut of original camera mount, bit more inside (everything shown on the photos) and a separator under…
Box for base ND 8, 16, 32 filters and one spare or camera cover for walksnail moonlight camera Hinge with filament 1,75
A simple TPU adapter that lets you use cheaper/easier to find ND filters for a GoPro Hero 11/12/13/etc to a Caddx Moonlight camera. The GoPro Hero filters seem much easier to find and have much less color distortion than the caddx ones.…
Where to begin... I needed a durable Caddx Moonlight head unit for my Master 3X. I also happen to use GoPro Hero ND filters because they're just better than the caddx ones so I made the filter adapter found here . The result is this head…
This HueForge-style bas-relief was created using only 3 colors . 🔹 Colors Red and Dark blue : No special requirements. White : 💡 The result shown in the photos was achieved using Sunlu PLA White (standard PLA) . Highly opaque or matte…
This is a nightlight for our son. Print all parts once and use support where needed (moon, base plate, lid). Use natural/transparent filament (at least for the moon) . Glue the moon to the base plate. The lid can be screwed to the base…
A moonscape with silhouetted building. Created in HueForge. Get your copy at shop.thehueforge.com. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Inland Stellar Transmission Distance:…
Moonlight Luke haben Verriegelungsblöcke, die manchmal etwas kurz sind. Damit die Verriegelung tiefer eingreift, kann man diese Platten zwischen den Rahmen und die Blöcke legen. Sie benötigen entsprechend längere Schrauben.
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.3mm Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA PolyLite Natural Transmission Distance: 21 PLA PolyLite Azure Blue Transmission…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments used: Devil Design PLA Black Devil Design PLA Dark Gray Devil Design PLA Gray Devil Design PLA Vanilla Devil Design PLA Beige Devil Design PLA Light…
StarLight star bright first star I see tonight I wish I may I wish I might have this wish I wish tonight. 10% infill 3 to 4 lines .1 or .2 height No support Print in place Print with raft or brim if dosent stick Comes with a Bambu colored…
V4 UPDATE!!! Snap fit connectors using PETG. no more screws for the tail fins or wing 3!!! The Velora is highly versatile and has many possible configurations. It can be flown as a twin puller or single pusher. It can be flown as FPV or…
Print in TPU 98 100% infill Organic support Use appropriate m2 screws and nuts Dont screw the vtx directly on the frame, leave it loose.
This is the remix of original camera holder from BetaFPV that fits better Walksnail Moonlight Camera. It moves camera position down a few millimeters to allow camera rotation at any angle, and extends the camera protection to make your…
The adapter for Walksnail Moonlight VTX to fit perfectly into your Pavo25 V2 drone. It allows you to put the VTX a little higher than it's designed for DJI VTX, but keeps it tight in place and protects from ground. It gives great access…
This is a desk stand for the Pavo25 V2 Walksnail Moonlight VTX Holder Adapter . It fits the holes for screws in the adapter and keeps your drone in cool position on your desk, just as if it'd flying.
This is the remix ofSnapLock Storage Boxes to keep your Pavo25 V2 with Walksnail Moonlight VTX safe. It closes easily and can reuse the sponges that are available when you buy the drone. Print with no supports, works fine for me with PLA…
CaddxFPV Walksnail Moonlight VTX Mount for TBS Source One V5 Made possible with @Dtuned_2160698 Features: Full protection of the Moonlight Support dual antennae setup Cutouts for port access Slit and zip tie step for easy and flexible…
When ordering the analog version there is only one whole for the camera mount, which requires a new mount for the Walksnail system. This version can be used for the Moonlight, but also any other Walksnail camera with 2 mounting wholes.…
Well, this is the strangest thing I've modeled so far. Between all the Bloodborne models I've made to even the internet memes I've done for April Fools, this is the weirdest thing I've done that was meant for legitimate use. This is the…
Support pour la camera Walksnail Moonlight afin de ne pas voir les hélices
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments used: Devil Design PLA Black Devil Design PLA Super Blue Devil Design PLA Blue Devil Design PLA Navy Blue Devil Design PLA Dark Orange Devil Design…
UPDATED 3/13/2024: Verified VTX shell dimensions. Uploaded f3d option. ND Filter may need slight tolerance adjustment (or my 3d printer needs calibration...)
These are some parts created by Zerpo from Piratfames for the Lil Matey2 that I could test for my Moonlight 4K builds. I've only added a 10mm cap holder to the VTX (both versions available) if you would like to use a cap on your build.…
VTX Bracket for FlyLens 85 with Walksnail Mini+Moonlight 4K Upgrade Kit
A simple little spacer to fit your Moonlight VTX inside this little beast ! /!\ Need a Rework of the plastic frame not a big Job however need just a bit of accuracy and it fit perfectly ! :) Also Longer Screw will be needed to fix…
To multicolor please use ".3mf" files and set up colors in objects list. Remember to move away auto generated purge tower. Thanks to adding new layers on moon and crown of the tree, i was able to separate this elements and allow to set up…
ND Filter cover for Walksnail Moonlight Kit. 1st revision. I will make some improvments in the future
Simple light cover for the Moonlight Filter light and efficient
