2 Material Moonlight Canopy for Pavo 20 Pro
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
2 piece canopy for the pavo20 pro using a stiff filament for the main structure and TPU for bumpers/lens guards
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 161
- Makes
- 2
- Views
- 979
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Public Domain
The main body of this canopy secures the antennas and camera to the frame. I printed this portion with PETG-CF, although any PETG or ABS should be fine.
Use 4x m2 heat set inserts (2 mm tall) for the mounting holes.
The TPU bumper is printed with 95A hardness TPU, and must be bent considerably to fit into place. The camera screws go through the TPU, so no glue is required.
The nd filter bumper is also printed out of TPU. It fits around the cylindrical portion of the filter and in front of the rest of the bumper.
note I added a thicker version with extra antenna support per the first comment. Those models are in the .zip file.