GEPRC CineLog 35 V2 Walksnail Avatar HD Moonlight VTX Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A mount to fit the VTX of the Caddxfpv Walksnail Avatar Moonlight Kit onto the CineLog35V2
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 46
- Makes
- 0
- Views
- 366
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
When building the GEPRC CineLog35V2 FPV Drone, I was really disappointed that the Walksnail Moonlight VTX would fit, but I wouldn't have access to the MicroSD - furthermore, cables on the AiO board were touched by the VTX' metal casing.
Therefore I used some available renderings of the drone and created a case for the VTX, which is mounted on top of the frame itself. To make the drone a bit more nerdy, you can glue in round WS2812B/Neopixel LEDs - there's enough space for cables beneath/inside. Alternatively, you could use googly eyes. ;-)
BOM:
- 4 M2x20mm screws (18mm might also work)
Printing:
- TPU recommended
- 2 Walls, 15% infill
- 0.2mm layers