1 / 2
GEPRC CineLog 35 V2 Walksnail Avatar HD Moonlight VTX Mount — zdjęcie 1
1 / 2

GEPRC CineLog 35 V2 Walksnail Avatar HD Moonlight VTX Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A mount to fit the VTX of the Caddxfpv Walksnail Avatar Moonlight Kit onto the CineLog35V2

Ocena
0 / 5
Polubienia
1
Pobrania
46
Wydruki
0
Wyświetlenia
366
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

When building the GEPRC CineLog35V2 FPV Drone, I was really disappointed that the Walksnail Moonlight VTX would fit, but I wouldn't have access to the MicroSD - furthermore, cables on the AiO board were touched by the VTX' metal casing.

Therefore I used some available renderings of the drone and created a case for the VTX, which is mounted on top of the frame itself. To make the drone a bit more nerdy, you can glue in round WS2812B/Neopixel LEDs - there's enough space for cables beneath/inside. Alternatively, you could use googly eyes. ;-)

BOM:
  • 4 M2x20mm screws (18mm might also work)
Printing:
  • TPU recommended
  • 2 Walls, 15% infill
  • 0.2mm layers

Tagi