Fern Moonlight
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Project: fernmoon.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x100mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm
#000000 PLA+ Elegoo Black Transmission Distance: 0.8
#471682 PLA+ Elegoo Purple Transmission Distance: 2
#4d565c PLA+ esun Gray Transmission Distance: 1.4
#ffffff PLA+ Elegoo White Transmission Distance: 5.4
#ffea01 PLA+ Elegoo Yellow Transmission Distance: 4
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Purple
At layer #9 (0.8mm) swap to Gray
At layer #10 (0.88mm) swap to White
At layer #21 (1.84mm) swap to Gray
At layer #22 (1.92mm) swap to Yellow
At layer #23 (2mm) swap to White for the rest.