486 models
The first in the Japanese Elemental Oni series - see also TyphoOni (Water) , OniKaze (Air, Wind) , Little Sakura , Little Coral , Little Bramble Meet the InfernOni About 4.5 inches (113mm tall) - Can be sized bigger or smaller. Created…
Print approx. €2.87–€3.50 excl. taxPreliminary estimate for one variant
Hey fellow Prusa enthusiast, I hope that you are doing great! I am a huge fan of Sandro Botticelli 's work and noticed that there are not many models available that resemble his Mappa dell' Inferno or “ Map of Hell ”. An intriguing piece…
Print approx. €29.68–€36.27 excl. taxPreliminary estimate for one variant
This is a bracket for mounting E27 lamp holders (40mm diameter) behind televisions or monitors with VESA 200 mounts (max. M6 screws). The angle can be adjusted in 30° steps. To do this, simply insert some 1.75 mm filament into the two…
Print approx. €4.07–€4.98 excl. taxPreliminary estimate for PETGSource material: PET
The Lava Bracer is a 3D printable forearm accessory featuring a dynamic molten rock design with intricate textures, ideal for cosplay or as a unique wearable art piece. Printing Settings Printing Settings: - Printer Model: Prusa i3 MK3S -…
Infernal Oni Matriarch is an original fantasy demon warrior figure designed specifically for reliable FDM 3D printing. The model focuses on strong anatomy, clean edges, and well-defined shapes that translate well to filament printing…
Spawn é um anti-herói dos quadrinhos criado por Todd McFarlane e publicado pela Image Comics em 1992. Seu nome verdadeiro é Al Simmons , um ex-soldado de elite e agente do governo norte-americano, famoso por sua eficiência mas envolvido…
¡Libera a este demonio encadenado en tu colección! "Infernal Demons Series" Versión épica de un demonio original con cadenas rotas, alas membranosas extendidas, cuernos curvados y cuerpo musculoso. Pose amenazante y detallada, con…
I could not find a 3D model of Botticellis Mappa dell´ Inferno or Map to Hell on any platform so I created my own in Tinkercad. I really hope you like this design as much as I do. Sandro Botticelli, was born March 1, 1445 in Florence and…
NOT DESIGNED FOR PRINTING I have a Simple Reference Model for a small linear stage. The linear sliding axis is based on a somewhat common design I can find on places like Aliexpress, Ebay and Amazon. This one is based on a stage with a…
Vhorlath Realms – Season II: Shadowed Empires The Infernofang Hell Hound is a savage demon beast with a flaming mane, horned head, spiked armor, and a ferocious open-jawed expression. Built like a predator from a burning abyss, this…
Thanks to CGGZiLLA work on Wallow86 inital design that gave me a perfect ground work to adapt the to whatever cheapish headrest I found on Amazon Canada. Truth to be told, I was sure I bought the same headrest…
Unleash pure infernal dominance on your tabletop with this Infernal Demon Warlord , a brutal winged hell commander sculpted in striking high detail. Standing triumphantly atop a mound of skulls, this fearsome demon radiates molten fury.…
Unleash chaos from the underworld with this Hellfire Demon Wolf , a ferocious infernal beast sculpted mid-lunge and engulfed in flame. With blazing fire erupting from its back, molten cracks across its muscular body, and a snarling open…
Ein kleiner Organizer für die Fernbedienungen Samsung /Magenta / Amazon , plus kleinere Öffnungen für Kugelschreiber etc
Discord: https://discord.gg/nJvfCKD2jx a community Server to chat share projects etc. Picture 1 and 2 made by https://www.printables.com/@LuciferShrimp Available as Hexagon, Circle or as a Line A display / stand to make some decoration…
Atolla T201 Laser range finder - Laser Entfernungsmesser - Holder - Halter Deutsch: Drucke es in der Richtung wie auf dem ersten Foto. ======================================= English: Print it in the direction like the first photo. Buy me…
This Demon Assassin Rogue captures the lethal elegance of an infernal hunter in motion. With sweeping horns, a flowing cloak caught mid-air, and twin curved blades ready to strike, this sculpt radiates speed and precision. The dynamic…
This Infernal Demon Warlord stands ready for carnage, gripping a massive blade across his shoulder while advancing with predatory confidence. Towering curved horns, sinewy musculature, clawed feet, and a tattered cape combine to create a…
Project: fernmoon.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x100mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is…
The Lava Bracer is a 3D printable forearm accessory featuring a dynamic molten rock design with intricate textures, ideal for cosplay or as a unique wearable art piece. Printing Settings Printing Settings: - Printer Model: Prusa i3 MK3S -…
Unleash the heat with this 3D printable STL model of an Inferno Dragon. This fearsome fiery reptile is perfect for adding a powerful and intense presence to your fantasy displays, tabletop adventures, or miniature collections. No AI.…
Discord: https://discord.gg/nJvfCKD2jx a community Server to chat share projects etc. Picture 1 and 2 made by https://www.printables.com/@LuciferShrimp Available as Hexagon, Circle or as a Line A display / stand to make some decoration…
Bring the dark side of elegance to your 3D collection with this Infernal Queen STL , part of the Dark Fantasy Collection . Detailed sculpt : demonic wings, horns, gothic corset outfit, and flowing cape. Dynamic base : surrounded by…
Wandhalter für die Funkfernbedienung von Hallentoren und Rolltoren. Diese hier ist auf der Rückseite flach weil ich sie an die Wand geklebt habe. Für die Befestigung mit Schrauben brauchen nur die Löcher ergänzt werden. Gedruckt mit PETG,…
What was the trigger... Utricularia jamesoniana ( more info ) is one of my favorite carnivorous plants species. In their natural habitat they're perennial epiphyte carnivorous plants growing in lowland rain forests or montane cloud…
If you enjoy my designs and would like to support my work, or get a commercial license to sell prints of my models — you can join me on Patreon: 👉 https://www.patreon.com/cw/AR3DP A fierce low-poly dragon sculpted with angular geometry…
Unverständlicherweise wird eine passende Halterung "eingespart". Irgendwie suboptimal, wenn die FB durch die Küche "fliegt". Auf den einschlägigen Portalen nichts Passendes gefunden. Also musste ich eine entwerfen :-) Sie ist etwas größer…
Unleash chaos from the underworld with this Hellfire Demon Wolf , a ferocious infernal beast sculpted mid-lunge and engulfed in flame. With blazing fire erupting from its back, molten cracks across its muscular body, and a snarling open…
This Demon Assassin Rogue captures the lethal elegance of an infernal hunter in motion. With sweeping horns, a flowing cloak caught mid-air, and twin curved blades ready to strike, this sculpt radiates speed and precision. The dynamic…
This Infernal Demon Warlord stands ready for carnage, gripping a massive blade across his shoulder while advancing with predatory confidence. Towering curved horns, sinewy musculature, clawed feet, and a tattered cape combine to create a…
Ein kleiner Organizer für die Fernbedienungen Samsung /Magenta / Amazon , plus kleinere Öffnungen für Kugelschreiber etc
Unleash pure infernal dominance on your tabletop with this Infernal Demon Warlord , a brutal winged hell commander sculpted in striking high detail. Standing triumphantly atop a mound of skulls, this fearsome demon radiates molten fury.…
🌿 Fernlight Cottage Step into a world of quiet magic with Fernlight Cottage — a whimsical woodland home perched gently on a tree-grown foundation, where moss creeps along the bark and tiny mushrooms gather at the roots. Supports are…
Infernal Skull Wall Sculpture – Dark Fantasy Demon Display Bring a sinister presence to your space with this highly detailed horned demon skull. Designed as a dramatic wall-mounted sculpture, this piece blends dark fantasy aesthetics with…
Infernal Skull Throne – Dark Fantasy Display Statue A towering demonic skull altar forged in darkness and flame. This highly detailed statue features massive curved horns, heavy chains, jagged spikes, and a glowing infernal core that…
Project: fernmoon.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x100mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is…
Cet engrenage est un composant de la voiture radiocommandée Inferno 4wd Kyosho ou No. 3281 des éditions de 1991 à 1995. Sur la notice fournie avec la voiture, cette pièce est la BS-56. Cet engrenage est composé de 53 dents pointues, de…
Rising from molten stone, this Infernal Fire Dragon embodies pure elemental destruction. Wings fully spread and claws poised, the dragon stands dominant atop a fractured lava platform, surrounded by flowing magma and erupting flame. The…
Command fear and dominance with this Dark Overlord on Skull Throne model, a dramatic centrepiece sculpt designed for dark fantasy enthusiasts. Seated in a powerful, imposing pose, the armored figure rests upon an ornate throne crowned…
This is a digital 3D printable model of Fern’s staff from Frieren: Beyond Journey's End ✨ Designed as a full-size, 55-inch-tall cosplay prop, it’s divided into color-separated sections for easy printing and assembling. Sturdy and…
Emerging from twisted roots and burning with inner fury, the Infernal Living Tree captures the terrifying presence of a corrupted forest spirit. This dark fantasy sculpture features a gnarled tree trunk transformed into a monstrous face,…
Rule the abyss with this Demon King on Skull Throne statue, a powerful dark fantasy sculpture that embodies dominance, fear, and infernal authority. Seated in a commanding pose, the horned demon lord rests upon an ornate throne adorned…
Radiating pure infernal power, this Infernal Demon Lord Bust captures the terrifying presence of a ruler from the depths of the abyss. The sculpture features massive curved horns, razor-like armor spikes, and a muscular demonic form…
NOT DESIGNED FOR PRINTING I have a Simple Reference Model for a small linear stage. The linear sliding axis is based on a somewhat common design I can find on places like Aliexpress, Ebay and Amazon. This one is based on a stage with a…
CfE 3D Nature Set Expansion Kitbashed for alternative or lost plants fitting to the original 3D nature set My connectors (magnetic or none-magnetic) required. Should fit into all positions of the tiles. Have fun end enjoy the game :) and…
Infernal Claw Mug – A demonic 3D printable coffee mug straight from the depths of Hell! This striking mug features a massive demonic claw aggressively gripping a clean cylindrical cup. The devil's hand emerges with sharp, twisted talons,…
The Inferno tower from Clash of Clans/ Clash Royale. .2mm layer height, slim tree support, outer brim for bed adhesion. Includes the Single and Multi traget configuration which have a hole on the top.
The Vision & The Legend: The Birth of the Inferno Crystal Phoenix Deep within the heart of the Aethelgard Peaks, where the volcanic fires meet the ancient frozen caverns, a legend was born. It is said that when a Phoenix nears the end of…
Arabic Numeral Clock Face 3D printable clock face with Roman numerals, designed for a standard quartz clock movement. The clock face can be used as a wall clock or as a standing desk/shelf clock with the included printable stand.…
I tried a cable clip (see remix linked) but that was too thin for my Moondrop Aria standard para-cord IEM headphone cable (8.4mm inside diameter, 6mm cable hole). I liked the original clip so decided I to quickly recreate my own variation…
Bosch Laserentfernungsmesser Zamo Skadis Holder Halterung für den Laserentfernungsmesser für die von Ikea Skadis Wand
English below Ich habe Fernauslöser für Slave-Blitze, die ich auch für kleine Studioblitze verwende. Dafür werden sie mit einem Kabel mit dem Blitz verbunden. Da ich den Auslöser nicht einfach am Kabel hängen lassen will und nicht…
Fernbedienungsbecher, das bis zu 3 Fernbedienungen halten kann V3 jetzt Verikal legbar
Printer: Ultimaker S3E Filament: Extrudr glowEx PETG Infill: 100%
Since operating the remote control for my garage door hanging on my car key chain was always a bit fiddly, I wanted to install a remote control permanently in my VW T-Roc (2018). But the existing housing of the Hörmann remote control (see…
I created this design to determine the accuracy of my printed parts compared to the design file. This follows an earlier design to check the accuracy of holes printed (see other design for Hole ref gauge). The diameters are noted on the…
Das sind STL Dateien zur Fernbedienung aus dem Homematic Programm. Beide Varianten, teilweise mit Text... Muss man sehen was für einen passt.. ❤Lasst gerne ein Like da ! Da freut sich der Bastler!✌😉 Jeweils mit 2 Befestigungslöcher 4mm an…
HC-12 Funkmodul: https://www.amazon.de/gp/product/B01LZWIY19/ref=oh\_aui\_detailpage\_o07\_s00?ie=UTF8&psc=1 Li-Ion Akku: https://www.amazon.de/gp/product/B06XPDV15R/ref=oh\_aui\_detailpage\_o07\_s00?ie=UTF8&psc=1 Category: R/C Vehicles
Display: https://www.exp-tech.de/displays/lcd/7177/itead-studio-nextion-nx4827t043-4.3-tft-lcd-intelligent-touch-display Akku: https://www.amazon.de/gp/product/B071D5QTHL/ref=oh\_aui\_search\_detailpage?ie=UTF8&psc=1 HC-12 Funkmodul:…
HC-12 Funkmodul: https://www.amazon.de/gp/product/B01LZWIY19/ref=oh\_aui\_detailpage\_o07\_s00?ie=UTF8&psc=1 Li-Ion Ladechip: https://www.amazon.de/gp/product/B015IK1YYC/ref=oh\_aui\_detailpage\_o00\_s00?ie=UTF8&psc=1 Li-Ion Akku:…
HC-12 Funkmodul: https://www.amazon.de/gp/product/B01LZWIY19/ref=oh\_aui\_detailpage\_o07\_s00?ie=UTF8&psc=1 5,8GHz Video Empfänger: https://www.amazon.de/gp/product/B01IPEVYZW/ref=oh\_aui\_detailpage\_o08\_s00?ie=UTF8&psc=1 5,8GHz…
本來是要自己使用 完全依照自身的鹿角蕨上板需求去繪製的測試品 但因為某些因素 決定分享出來給有需要的人！ 圓形版本在這 如果想要有任何意見 或是想法 歡迎自行修改使用。 請勿直接拿檔案去商用！！！牢固性跟可靠性都沒有做過任何驗證，後果自負之外，如果真的想要拿這東西賺錢，也拜託你自己重新畫過修改過，這東西又不難。。。幾分鐘的事情。 切片設定可參考圖片二，基本上VOID那個檔案是中間孔洞，請務必把上下實心層設定為0 六個孔洞是為束帶使用，用線繞也可以…
本來是要自己使用 完全依照自身的鹿角蕨上板需求去繪製的測試品 但因為某些因素 決定分享出來給有需要的人！ 橢圓形版本在這 如果想要有任何意見 或是想法 歡迎自行修改使用。 請勿直接拿檔案去商用！！！牢固性跟可靠性都沒有做過任何驗證，後果自負之外，如果真的想要拿這東西賺錢，也拜託你自己重新畫過修改過，這東西又不難。。。幾分鐘的事情。 切片設定可參考圖片二，基本上VOID那個檔案是中間孔洞，請務必把上下實心層設定為0 六個孔洞是為束帶使用，用線繞也可以…
Gedruck in PLA ohne Infill (Wall: 3-4 Loops). 5mm langer Federstahldraht D=0,6-0,8mm mit Lötkolben eingeschmolzen.
Luftkanal - 3 Modelle 2 Versionen (alter und neuer Printer frame) ohne Lüfter mit Lüfter 40mm mit Anbaulüfter 45mm Air duct - 3 models 2 versions (old and new printer frame) without fan with fan 40mm with attached fan 45mm…
Tisknuto na tiskárně Průša MK4S 0,4n_0,10mm fast detail PETG bez podpěr i límců. Výplň 20% Horní plata jsem ve sliceru upravil pro tisk nápisů rozdílnou barvou. Vícenásobný tisk: Inferno monsta 6x; hráč 4x; mince 2x.
Gehäuse für eine Test-LED. Diese verwende ich zum prüfen meiner Fernzündmodule. Als LED habe ich eine gelbe, 3mm LED mit entsprechenedem Vorwiederstand verbaut. Der Vorwiederstand muss entsprechend ihrer Zündspannung ausgewählt werden.…
Easily separate the base game from the expansion cards. Printed with FLSUN V400 with 3 perimeters and 5% Gyroid infill.
Hier habe ich einen Halter für eine Caratec-Fernbedienung angepasst aus einer mir unbekannten Quelle für eine Oyster-Fernbedienung. Im Original passten die Maße nicht für meine Fernbedienung und die Halterung wurde geschraubt. Die…
Inspired by one of my other designs, I wanted to create another geometric design that holds itself together and looks stylish - https://www.printables.com/model/432749-truchet-coaster This design was also created in Affinity Designer and…
—— QA: Q: Why did i make all models free? A: The simple reason is Copyright issues. I am not allowed to make any money on Copyrighted material. ——— Q: Who made all the models? A: The models are made by several people, including myself. I…
Rademacher DuoFern 9491 remote control holder Category: Organization
Description This is a 3D printable model based on FERN from Frieren: Beyond Journey's End. Follow me on my social media Twitter: https://twitter.com/FANMADE_NFT Insta: https://www.instagram.com/fanmade3d/
English: Alternative housing as a replacement for a defective original housing. Assembly instructions Please refer to the pictures for assembly instructions. Printing parts. Push or press two square nuts into the base section (Caution:…
A safe place for the tiny remote control of a MCZ pellet stove. Two magnets (diameter 10mm, 2mm thick), two drops super glue and a piece of steel (20x35x1mm) will make a simple wall mount. The wall mount could be attached to the wall…
Eine Halterung für (Große) Fernbedienungen von LED-Streifen / A holder for (large) remote controls from LED strips
Here is my inlay for the realy good boardgame Inferno. It fits evertything and you can store it vertical. Works with sleeved cards. Print everthing as in the Filename specified. Resolution 0.2 mm 10% Infill no raft or brim Enjoy edit: it…
Ein Gehäuse für die beiden Ective Geräte: Smart Battery Monitor & RC1 Fernbedienung mit Ladestandsanzeige für Wechselrichter. Es ist genügend Platz unter dem Gehäuse für die Kabelführung. Passend auch für die RC Pro Wechselrichter…
It is a tool to open fernox filter and clean it. Printed with PLA and work great.
Dragonball Ziffernblatt mit einem Durchmesser von 23cm. Das Loch in der Mitte beträgt 8mm. Getestet wurde dieses Model mit einem FDM Drucker (BambuLab X1Carbon). Stützen sind nicht erforderlich. Viel Spaß beim Drucken.
Organize all tokens and cards for the game Arcadia Quest Inferno (by CoolMiniOrNot ).
Halterung für die Fernbedienungen von Woward LED-Leuchten - Im Format der Philips Hue Halterungen ( 70x115mm ) 2x Alte Version: Gold 2x Neue Version: Weiss Montage: - 4x Magnete - Ø25x2mm und doppelseitiges Klebeband oder Araldite - 2x…
Halterung für ein Fernglas / Gucker / Porroprismenfernglas mit einem Mittelstegdurchmesser von 13,8 mm. Es werden zwei Schrauben M5 x 25 mm oder länger benötigt sowie eine 1/4 Zoll UNC Einschmelzmutter. Mit dem bodenseitigen 1/4 Zoll UNC…
Halterung für ein Fernglas / Gucker / Porroprismenfernglas mit einem Mittelstegdurchmesser von 17,4 mm. Es werden zwei Schrauben M5 x 25 mm oder länger benötigt sowie eine 1/4 Zoll UNC Einschmelzmutter. Mit dem bodenseitigen 1/4 Zoll UNC…
Wallart of the silhouette of the Portuguese poet Fernando Pessoa. A decorative piece that pays tribute to one of the greatest names in Portuguese poetry. Printed in PLA. 15% infill. A brim may be need.
I have a family member that LOVES Infernape. I created a clock using this face as a gift. The printing details including layer changes and filaments used is attached. To create the clock, I created this HueForge model, then got a few…
Halterung für ein Fernglas / Gucker / Porroprismenfernglas mit einem Mittelstegdurchmesser von 15,7 mm. Es werden zwei Schrauben M5 x 25 mm oder länger benötigt sowie eine 1/4 Zoll UNC Einschmelzmutter. Mit dem bodenseitigen 1/4 Zoll UNC…
The model consists of a total of four individual parts, which are screwed together after printing. The M8 threads have been enlarged or reduced by 5% each, so that they can be easily screwed together after printing. Printed with PLA or…
Um die Fernbedienung für mein Deckenlicht nicht immer zu suchen einen ganz einfache Lösung. Eine einfache und simple Wandhalterung für die Fernbedienung der Marke Mega Light (passen bestimmt auch andere hinein). Grobe maße der…
![[Printer-Box] Prusabox - MK4S Motherboard cooling für Drucker mit Elastomerdämpfern](https://media.printables.com/media/prints/1050632/images/7959950_94bcd371-e2b3-48e6-8f3c-90fc12944c6f_ada510b2-3af4-4dd7-a0ac-00021ecf287a/6.jpg)
