1 / 3
Planter for perennial epiphyte (carnivorous) plants, orchids & ferns — image 1
1 / 3

Planter for perennial epiphyte (carnivorous) plants, orchids & ferns

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Preliminary estimate for PETG

€2.59 – €3.16 net (excluding VAT)

For file: perennial epiphyte planter.bgcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €2.87 excluding VAT (range midpoint).

Weight reported by the author
44 g
Print time reported by the author
2.63 hr
Source material
PET
Estimate material
PETG
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Designed to grow Utricularia jamesoniana indoors, but will work for similar species and ferns, orchids, etc.

Rating
5 / 5
Likes
16
Downloads
59
Makes
1
Views
474
Reviews
1

Updated at source:

Model information

Category
Other Ideas
License
Standard Digital File License

What was the trigger...

Utricularia jamesoniana (more info) is one of my favorite carnivorous plants species. In their natural habitat they're perennial epiphyte carnivorous plants growing in lowland rain forests or montane cloud forests. You'll find them growing in mossy tree trunks and the like. Growing plants indoors in the Netherlands I have neither rain or cloud forest...

Approach

Experimented a bit what would work and ended up with a hollow 'trunk' you can fill with a medium of your choice. If you ever want to repot or split the plant, you can simply snip the bars with some pliers so you can get the plants out without damaging it.

So far they work well for me, if there’s interest I can also share the P9 version. Leave me a like if you like it, helps me save for extra filament!

Use at your own risk and don't gamble your only plant on it!!! :-)

How to set it up

Put some wick through the holes and lead it up in the planter. Cover it with medium of your choice (sphagnum/perlite/bark mix for instance), put some pullings or nodes in it, slide the cover in, place it in a water tray and wait.

  • The cover should keep the medium in;

  • The wick makes sure it stays moist;

  • If the plant grows well, the stolons and leafs will find their way between the grid.

Timeline:

  • November 2024: plugged it with two tiny cuttings

  • April 2025: several leafs and a stolon in the front and one even peeking out from the top

  • June 2025: first 3 flower stalks emerge

Sphagnum is too coarse to explode through the grid, but jamesoniana pries through. Zero maintenance except for making sure the water tray stays watered (rain water/osmosis) anywhere between few mm and a few centimeters. It's been flowering regularly and apart from taking some algae from the base every now and they're quite happy with it. 

The images included printed with brown PLA are from one of the first prototypes to get an idea how it turns out. This was the tall version. Turned out half the height, which I shared here, was enough. This setup caters to different moisture levels from top to bottom so the plant will settle on the sweet spot within the moisture gradient. That's the black PETG print.

The print

Main body used to be twice as tall, but it turns out the sweet spot for this species is just 2-3cm above the water table so I made it less tall. Included are two versions of the grid as well. One has 0.4mm spokes and the other is a bit more sturdy with 2 perimeters for the spokes.

Models:
  • main (S) - the main body

  • grid - small - 0.4mm spokes / 1.35mm spacing

  • grid - medium - 0.8mm spokes / 1.5mm spacing

  • grid - large - 1.2mm spokes / 3.0mm spacing

  • grid - holes - 0.8mm spokes / 1.44 in between with random 5 & 7mm round holes for bigger plants

  • endcap - lid to close it off if you want

Support & Tolerances

I designed it so they all print without supports. A 0.2mm tolerance is used between the base and the grid which is probably enough for most printers.

Quality & material

The set takes about 1h45 hours on a CoreOne if you're using the 0.2mm structural profile for the base + medium grid. About an hour when you pick the 0.28mm draft preset. Pick the quality you have time for I'd say. PETG would be better for water / outdoor use, but the PLA version works fine for me as well.

Licence  and use

Spend quite some time tweaking and prototyping this, so explicitly sharing this for your personal use only, no (re-)sales.

Help me out!

If you like it, please share a make, give a thumbs up, etc so I can keep up prototyping! And if you really love it, tip me on PayPal. Much appreciated and happy growing!

Updates

  • 29-12-2025: tweaks to text

  • 30-12-2025: added more grids by request

  • 14-01-2026: added end cap STL

  • 17-04-2026: main model had a lid to better lock in the grid

New photo to show a happy plant :-)

Tags