Planter for perennial epiphyte (carnivorous) plants, orchids & ferns
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed to grow Utricularia jamesoniana indoors, but will work for similar species and ferns, orchids, etc.
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 58
- Wydruki
- 1
- Wyświetlenia
- 471
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Standard Digital File License
What was the trigger...
Utricularia jamesoniana (more info) is one of my favorite carnivorous plants species. In their natural habitat they're perennial epiphyte carnivorous plants growing in lowland rain forests or montane cloud forests. You'll find them growing in mossy tree trunks and the like. Growing plants indoors in the Netherlands I have neither rain or cloud forest...
Approach
Experimented a bit what would work and ended up with a hollow 'trunk' you can fill with a medium of your choice. If you ever want to repot or split the plant, you can simply snip the bars with some pliers so you can get the plants out without damaging it.
So far they work well for me, if there’s interest I can also share the P9 version. Leave me a like if you like it, helps me save for extra filament!
Use at your own risk and don't gamble your only plant on it!!! :-)
How to set it up
Put some wick through the holes and lead it up in the planter. Cover it with medium of your choice (sphagnum/perlite/bark mix for instance), put some pullings or nodes in it, slide the cover in, place it in a water tray and wait.
The cover should keep the medium in;
The wick makes sure it stays moist;
If the plant grows well, the stolons and leafs will find their way between the grid.
Timeline:
November 2024: plugged it with two tiny cuttings

April 2025: several leafs and a stolon in the front and one even peeking out from the top

June 2025: first 3 flower stalks emerge

Sphagnum is too coarse to explode through the grid, but jamesoniana pries through. Zero maintenance except for making sure the water tray stays watered (rain water/osmosis) anywhere between few mm and a few centimeters. It's been flowering regularly and apart from taking some algae from the base every now and they're quite happy with it.
The images included printed with brown PLA are from one of the first prototypes to get an idea how it turns out. This was the tall version. Turned out half the height, which I shared here, was enough. This setup caters to different moisture levels from top to bottom so the plant will settle on the sweet spot within the moisture gradient. That's the black PETG print.
The print
Main body used to be twice as tall, but it turns out the sweet spot for this species is just 2-3cm above the water table so I made it less tall. Included are two versions of the grid as well. One has 0.4mm spokes and the other is a bit more sturdy with 2 perimeters for the spokes.
Models:
main (S) - the main body
grid - small - 0.4mm spokes / 1.35mm spacing
grid - medium - 0.8mm spokes / 1.5mm spacing
grid - large - 1.2mm spokes / 3.0mm spacing
grid - holes - 0.8mm spokes / 1.44 in between with random 5 & 7mm round holes for bigger plants
endcap - lid to close it off if you want
Support & Tolerances
I designed it so they all print without supports. A 0.2mm tolerance is used between the base and the grid which is probably enough for most printers.
Quality & material
The set takes about 1h45 hours on a CoreOne if you're using the 0.2mm structural profile for the base + medium grid. About an hour when you pick the 0.28mm draft preset. Pick the quality you have time for I'd say. PETG would be better for water / outdoor use, but the PLA version works fine for me as well.
Licence and use
Spend quite some time tweaking and prototyping this, so explicitly sharing this for your personal use only, no (re-)sales.
Help me out!
If you like it, please share a make, give a thumbs up, etc so I can keep up prototyping! And if you really love it, tip me on PayPal. Much appreciated and happy growing!
Updates
29-12-2025: tweaks to text
30-12-2025: added more grids by request
14-01-2026: added end cap STL
17-04-2026: main model had a lid to better lock in the grid
New photo to show a happy plant :-)
