130 models
You can use this as propagating station, simply put your plant cuttings in the cups, fill the cups with something like rock wool to keep that plant straight. You can also add LEDs to the top, there is a channel for a cable. You can also…
Uses the ancient method of Air Layering which is about growing roots right onto the branches to replicate your existing plants and produce a new one. It works on both indoor and outdoor plants. The propagation pods are safe for the mother…
This is Version 2 of my Cuttings Propagation Helper . This version now provides a fit-for-all mechanism to hold onto the cuttings! How to Use Clamp your cuttings into the ribs, place the flower over a jar filled with water and let nature…
Introduction This is remix of Mikolas Zuzas propagation station. I though the design was beautiful, but I couldn't print it since it didn't fit on the Mini print bed. Mikolas kindly provided the Fusion file in his upload. I redesigned the…
Plant Propagation Lid for Mason Jar. Fits half-pint mason jars and aids in plant propagation by holding your plant cuttings so while they grow roots in water.
Bring elegance and greenery together with this Infinity Propagation Vase . Inspired by the infinity symbol, this modern planter combines clean geometric lines with functional plant propagation. The design securely holds two 25mm diameter…
Note: Please comment if you are interested in these sort of things! This really tells me what I should make in the future. Thanks! Important info: For those who want to know, this model was designed in Onshape . The root ball is measured…
I made this decorative wall mounted test tube holder for propagating plant clippings and succulents, it is easy to water and remove the test tubes. This allows for easy viewing of growing roots and add a classy minimalist look to any…
90mm wide Pothos holder for rimless fish tanks. This will tension clip a cutting to the side of your tank. Pothos are great for getting rid of nitrate in the aquarium. I use it on a Fluval Chi tank. The glass is 4.5mm thick. PETG 10%…
new design! you can check out version 2 of my propagation helper! This handy little tool is inteded to go on a mason jar. You'll surely find a fit for your cutting with the differently sized holes: 1 x 3 mm 2 x 5 mm 2 x 6 mm 1 x 8 mm 1 x…
I made this small propagation planter to be all inclusive. This means it has a drainage hole in the bottom wich is partially pre covered in order for the soil to stay in place. Cura has some issues sliceing this model, I reccoment useing…
Root ball with built in hinge and locking clip
A simple model to prop up plant cuttings! Use it with empty Oui yogurt jars. The lid fits in loosely into the top. I printed it on the Bambu textured PEI plate with a 0.1x0.1 fuzzy skin and 10% gyroid infill. I welcome your ideas on how…
This a complete redesign of https://www.thingiverse.com/thing:4526477/files The original file did not have a thick enough wall. The "base" is 6mm, and the ball internal diameter is 2.5" (63.5mm). The holes to join the two halves together…
Being stuck inside with the pandemic going on has got me plunging in to hobbies that I've not done in awhile. I've got a bunch of plants that I'm propagating now and figured I would combine it with my other hobby fish/aquariums. Category:…
This device is for propagating trees/shrubs Dieses Gerät dient der Vermehrung von Bäumen/Sträuchern print two of the domes scale the domes for your needs no support needed fill the domes with soil moisture the soil take branch of a tree…
Kit: To print a single kit, I have provided a 3mf file containing 2 halves of the ball and 4 clips, the one in the picture aws printed with PLA. You can also find each element separately in STL format. Propagating Plants with Air…
The remix provides a FreeCAD project file with all parts for your customization needs. Changes from original: Wider cable channel through the spine of the model. Exit hole at “earth” level for moisture monitoring with nice cabling Changed…
Model is of a lid for a standard mason jar to make it look like a lil mushroom. Holes in the top allow for plant clippings to be placed with ends in water for propagation. I'm hoping to later add coverings for the holes you don't use and…
How to propagate plants? There are a lot of tutorials on the internet, I liked this one Step 1: Leaf Cutting/Trimming/Root Division Depending on the type of plant you're working with, you'll begin with cutting or dividing your plant. For…
This propagation aid can be used for containers with an opening between 5.5 cm and 6 cm in diameter. One aid has a narrower rim and the hole has a diameter of 1 cm for smaller plants. The other aid has an 8 mm wide rim at the top and a…
Some of my succulents had gotten pretty leggy, so I designed this propagation tray to fit on my windowsill. It's designed to be a quick print, printed in vase mode. My settings (the 3mf and gcode reflect this): PETG 0.6mm nozzle 0.3mm…
This is a simple dual tube propagation station for starting new plants. Glass tubes not included. The bottom has dimples so the rounded end glass tubes will stay in place. The tube holes are 25.5mm. If you would like a larger, 4 tube…
The Original Clip can only slice on half the way. This one fits the hole thing. But you have to print it in 105%!
There are files for both regular and wide-mouth mason jars. Prints in two pieces so that it is easier to remove once the roots come in.
https://MineeForm.com/ ✅ Unlock All STL Files Immediately ✅ Make Money by Selling 3D Prints ✅ Only $10 a Month (Cancel Anytime) Category: Models
A small remix of Camille Gerrick 's Oui Jar Plant Propagation Lid . I simply added some holes to the top, in a cute petal shape of course, to allow for better airflow within the jar 🌼 My cuttings are very small, so I want to try my best…
I designed this little clip because my wife wanted to start trying to propagate some plants from clippings other people had given her. The larger part of the clip rests on the lip of a jar or glass, and the smaller clip is designed to…
Size guide: MINI: very small pots ideal for single leafs and cuttings XL: big pots for grown plants or bigger leafs Note: MINI is just a 50 % downsized version of XL, so you can just transform them into each other or even create new sizes…
Add supports so that it prints properly it helps a lot.
So, what we have here is a four tube propagation station for growing new plants. It's a very easy print. It is intended to be used with glass tubes that have a rounded end as there are divots in the bottom section to secure the tube. The…
Introducing our Modern Wall-Mounted Propagation Tube Holder, the perfect solution for stylishly showcasing your plant propagation tubes. Crafted with a contemporary design, this holder adds a touch of sophistication to your space while…
Fits 6 15x100mm glass test tubes. Printed at 0.2mm layer height at 25% infill PLA. The tube fit should be tight so it doesn't wiggle. I bought the tubes off Amazon…
This is a heart shaped test tube stand for plant propagation. Two sizes for different test tube diameters. .80" and 1.00 inch. Print in it's side with supports inside the hole. Quick print!
Propagation station for three plants. Model is designed for tubes with a round bottom per the divots in the base so they are stable. For a four plant propagation station, check out:…
Plant Nursery for Cutting Propagation This is a plant nursery that can hold and propagate cuttings taken from plants. There are different versions of the pots available, with sizes ranging from 2x2 holes, up to 4x4 holes. I have actually…
Print this simple holder to mount your test tubes on the wall for plant propagation - no supports needed. This design works with a 20mm test tube (w/ brim) and scales well for other sizes. Designed to be mounted using a small Command…
Once I forgot about my basil props for a week 😬😬😬 and the roots grew so thick in the jars I had a tough time pulling them from the prop lid insert without damaging them. This solved the problem!
All our fresh fish is packaged in the same plastic tray, so I am using them for my propagation stations. Changed the top to have 20 holes and scaled the cup down to fit. Have included the Fusion 360 file. It has a guide I printed so I…
ROSETTE Radial Propagation Vase – Kit Card Rosette is built around a radial structure that unfolds from the center outward. Flat panels interlock to form a lightweight yet stable volume, defined by symmetry and openness. Designed as a kit…
I made little inserts to fit together, but you should also use super glue to glue it together.
The Plant Propagation Station is a set of plant-shaped holders for upcycling spice jars. They are perfect for propagating your favorite plants! Instructions: Print both sides of the model (SIDE A & SIDE B) in your choice of filament. Lay…
A modern plant pot and propagation station, which utilizes a spare 28.5mm x 95mm drosophila vial. Here is an example of where you can get the correct vials ( pack of 100 ). You can also get them in smaller packs ( like this pack of 25 )…
A voronoi pattern vase that fits a 20mm x 150mm glass test tube, for propagating plants such as philodendrons, monstera, pothos, etc. I used these test tubes from amazon (not an affiliate link, I get no money from you buying it): EISCO…
I ve been always struggling with cuttings falling inside the containers and rotting and when I was trying to get one out and all the others were all over the place. I ve tried some different solutions but I got them stuck or difficult to…
I printed this at 0.32 layer height. I designed these for these 25mm x 140mm tubes I had: https://www.amazon.com/gp/product/B07WWTLCMV/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
This is a small and simple cup with drainage holes for plants. very easy to 3d print. Print instructions this requires no supports and printed with a skirt.
Designed to aid in the propagation of plants by allowing easy placement within cups, this cover fits a standard 75mm cup and was modeled on a Chinet 10oz Crystal Cup we picked up at Costco. It should scale a few mm each way Printed with…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Here's my take on a 3D-printable way to display you propagation cuttings! Print the grid, the vial holder, and then maybe the bottom support if it's a larger or heavier vial. Currently there is only a 1in diameter hook, but I intend to…
Simple modern arch plant propagation station. Fits a standard test tube.
Introducing the Plant Bloom Booth - your ultimate companion for nurturing new plant life! This innovative propagation station is designed to make plant propagation a breeze. With its sleek design and sturdy construction, the Plant Prop…
The diameter for the hole is 26mm, the height of the model is 118 mm tall. If you have different tubes, you can do a little math to set the scale percentage to equal the tube diameter as long as the tubes are tall enough! I can help if…
Epipremnum aureum is easy enough to propagate but depending on the cuttings, it can be a pain to keep the leaves out of the water. I designed a little disk that fits loosely on a chap Ikea STELNA cup to hold the leaves in place while…
A while back, we bought a propagation kit from Etsy that had a wood/metal stand and 3 glass vases that got suspended in it, designed for propagating plants and looking nice. As time went by, we broke a few of them. Now that we have a…
Simple tray I designed in Tinkercad. Can be used for original purpose, or as a plant saucer or tray. Print in UV-resistant filament for outdoor use.
Print this simple holder to mount your test tubes on an IKEA Skadis pegboard for plant propagation. This design works with 20mm test tubes and smaller. If your test tube has a brim, you only need the main holder! Print the base if your…
This is a plant propagation test tube holder made for the IKEA skadis, it fits 16mm test tubes but they require a rim on the top of the tube so that it can hold. I don't suggest that you resize it because the hook that attaches to the…
Add depth and color to your plant shelf with these unique test tube propagation stands! There are two STL's for different diameter test tubes. Smaller version: height of 4.75 inches Larger Version: height of 6.5 inches Both designed for a…
This model is for propagation plants with a stem in a mason jar (e.g. a rubber plant). The outer diameter of the mason jar should be more then 94 and less then 98 mm . For the best fit the jar should be around 97 mm in diameter . The lid…
This is a small propagation station for propagating roots for hydroponics. It's built using the small 18x26x8 cm IKEA KUGGIS box, which holds around 2L of water. The holes are 30mm in diameter, ideal for foam pucks or pods from my jiffy…
Elevate your plant game with this versatile set of propagation stations. Designed with a clean, minimalist aesthetic, these models are perfect for turning your cuttings into a focal point of your home decor. This collection includes a lot…
i print that with Voron setting Layer Height 0.2 wall loop: 4 top shell:5 bottom shell:5 density: 40% can be lower but i like this setting and its work for me every time. This model is base on this part:…
I'm propagating a few plant cuttings. The test tubes to hand are 17mm with a screw on lid. I saw a few great ideas for much wider tubes, so have used them for inspiration. Modelled via freecad - (realthunder fork) designed to accommodate…
Printed in PETG. Flip the Mesh insert so the mesh is on the print bed. I used supports + brim for the Mesh Insert part but they might not be needed.
pictured with: fuzzy skin (.2mm point distance, .1mm thickness) ironing on topmost surface bambulab red granite marble pla
I used 6" wall mount rings for terracotta planters and some plastic tubes from Amazon. Propagation tubes: https://a.co/d/bZglD2S 6" wall hangers: https://a.co/d/bUjl1N4
This propagation tray has a slope in the middle that forces water to the edges and drainage holes. Print instructions This is a simple planter to print i printed mine using chep .28 cura slicer profile. No supports required. This is my…
3D model to hold 7 test tubes with the size of 20 x 110 mm to build a nice plant propagation station. test tube example link: 20 x 110 mm https://amzn.eu/d/g2a5fZL
with this model you can mount your beatiful plant anywhare you want i made it reletively small so it can fit even on frame of your cabinets or shelfs . it has two holes if you want mount it on a wall with screws .
Story: We started germinating our plants for our balcony. I used my LED-grow lamp ( LED grow strips + power cable + LED U-profile ) to support the little ones :). However, it wasnt easy to position the LED in the right position and…
Introducing the Propagation Station V2 – a sleek and minimalist design perfect for growing plant cuttings in style! This model features a sturdy, angled frame that securely holds a central cylinder where you can place your plant cuttings.…
A simple lid with spaces that holds plant cuttings upright over water. Stems submerged, leaves dry and elevated to catch ambient light. Designed for easy propagation of herbs and houseplants using common glass jar. Iterated for…
With this model, you can turn a used PET bottle into a propagation station for houseplants. It's very easy; just cut a PET bottle in half (careful not to hurt yourself), and you have a propagation container from the bottom section. It's…
Propagation Station holds up to 45 test tubes. Prints in about 5 hours total. Fits 21mm or smaller test tubes. Print pillars laying flat. Print at 0.3mm layer height. Glue all pieces together to stabilize it. Hot glue or super glue works.…
Plant Propagation Station utilizing the honeycomb storage wall holds up to 4 test tubes with the size of 20 x 110 mm test tube example link (not affiliated): https://amzn.eu/d/g2a5fZL
I made this to hold a single vial that has a diameter of 16.5mm for propagating my string of hearts.
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
I wanted a way to hang propagation tubes on the wall and have them interchangeable and also look good and i think with the help of the HSW i have nailed it. This simple Propagation Tube Holder will hold any tube that has a neck width of…
EN: 40x40 mm PC fan holder for the Samla propagation box from Ikea. The fans in the box are used for good air circulation, which prevents mould from forming. The main attraction is the fan attachment on the lid, which is also a grommet…
Rise garden green onion propagation covers. Three sizes 9mm ,11mm , 13mm. These work great for covers over store bought green onions Put the green onion directly in the net pots with no medium and throw the covers over them. Works on all…
Rounded mid century design test tube holder for plant propogation. This was design to hold a .800" dia test tube. Printed using PLA at .4mm nozzle. I added supports for the test tube holder but it could be printed without. Enjoy!
Equation of electromagnetic propagation power given a distance between the transmission and reception power Category: Keychains
Print 10 locks, 2 legs, 2 tube alignment trays, and 1 bottom bar. Truly though, the pegs are not really needed.
Printed in two pieces and attached with wood screws The command strip recesses are sized for one half of a strip split lengthwise A parts list will be added soon
Traditional plant propagation balls work well for outdoor plants and vines, but I found them less practical for indoor vining plants. One of the main drawbacks is that it can be difficult to check the moisture level of the soil inside,…
I saw this propagation station design on Makerworld by creator @dyst.lab but i couldnt customize it to fit my test tubes or properly load up in my slicer, (could be user error), but i just went ahead and designed my own, heres the link to…
I apologize for the bad photo it will be printed and added soon. This is for propagating small spider plants for faster growth, before potting. I will not waste your time with useless writing for you to read, so let's jump into…
I found that many of the models I found for plant propagation did not do enough to support my cuttings, which always ended up flopping over so the stem floated on top of the water level. This model is designed to fit standard size mason…
I designed this propagation station to grow Alocasia corms / rhizomes in a clean, compact, and organized way. The station holds 15 individual 2cl shot cups . Each cup uses a raiser insert so the corm sits above the water instead of…
This model is a cone, it is made to realize experiments on the propagation of the sound, in particular on the diffraction of the waves. (Pictures and details of the experiments I made with it are coming soon)
This model is a cube whose interior is not smooth, it is made to realize experiments on the propagation of the sound, in particular on the diffraction of the waves. The model has several holes allowing to use sensors to realize different…
This plate can be used to grow cuttings as hydroponics. Simply place them on a jar or something similar. That way the leafs don't touch the water and can't rot easily. The top has a conical shape so water is able to drain into the jar. It…
Minimalist 3D printed holder designed for test tubes used for plant propagation or growing plants in water . It is perfect for rooting plant cuttings and also works as a stylish decorative piece for a desk, shelf, or windowsill. The…
Plant Propagation Support Planter – Grow Stronger Cuttings with Ease! Propagating plant cuttings just got easier with this planter ! Designed to provide stability and proper drainage, this planter ensures your cuttings stay upright while…
Low has a hight of 45 cm, medium is 60 cm and high is 85 cm. The Base has a diameter of 7 cm.
This is a test tube holder that is adapted for the gridfinity system. Grid spacing is 3x3. The holder can hold 16 test tubes. We got these tubes for propagation purposes to root new plants. Tubes are 110 mm (4.25") tall and 25mm wide (1…
This simple push fit planter for your fish tank or aquarium works for small plants or off cuts/shoots for propagation. There are 2 versions for both 5mm glass and 3mm glass. If you require any other sizes, or the current ones are a bit…
Variation on a window shelf that fits my vinyl windows inside. it just presses over the inside flange and holds 15mm via
This model is a cube whose interior IS smooth, it is made to realize experiments on the propagation of the sound, in particular on the diffraction of the waves. The model has several holes allowing to use sensors to realize different…
