1 / 3
Gridfinity Ikea Eket drawer Baseplates - 70x35x35 cm
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These are the base plates (and spacers) needed for the wide Ikea Eket drawer with 70x35x35 cm dimensions.
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 113
- Makes
- 2
- Views
- 656
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Public Domain
These are the base plates (and spacers) needed for the wide Ikea Eket drawer with 70x35x35 cm dimensions.
I used two 5x5 baseplates, two 5x1 baseplates and two 6x2 baseplates.
I also created some small spacers for the sides and the back.
To fill a whole drawer, you need to print:
- 4 side spacers
- 4 back spacers
- 2 5x5 baseplates
- 2 5x1 baseplates
- 2 6x2 baseplates
Everything fits closely into the drawer and there is little room for wiggle.
If you prefer a looser fit, you could reduce the width of the spacers a bit, to make them narrower or make them a bit wider to achieve a tighter fit.