1 / 5
Swissphone s.QUAD Stand X15 X35 Voice C35 C45 halter — zdjęcie 1
1 / 5

Swissphone s.QUAD Stand X15 X35 Voice C35 C45 halter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This precisely designed stand is the ideal storage solution for your Swissphone s.QUAD Pager.

Ocena
5 / 5
Polubienia
6
Pobrania
100
Wydruki
1
Wyświetlenia
385
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Standard Digital File License

🇩🇪 Swissphone s.QUAD Ständer für X15 / X35 / Voice / C35 / C45

Dieser präzise konstruierte Ständer ist die ideale Ablage für deinen Swissphone s.QUAD Melder. Er ist so ausgelegt, dass er komplett ohne Support gedruckt werden kann – für saubere Oberflächen ohne Nacharbeit.

#### ✅ Features

- Perfekte Passform: Getestet mit Originalgehäuse – der Melder sitzt sicher, wackelt nicht und lässt sich leicht entnehmen.

- Kompatibel mit der gesamten s.QUAD-Serie (baugleiches Gehäuse):

- Digital: s.QUAD X15, X35

- Analog: s.QUAD Voice

- Hybrid: s.QUAD C35, C45

- Supportfreies Design: Optimierte Geometrie, damit kein Support nötig ist.

- Clip-freundlich: Der Gürtelclip auf der Rückseite hat genügend Platz und blockiert nichts.

#### 🖨 Empfohlene Druckeinstellungen

- Schichthöhe: 0,12 mm für maximale Präzision und Passgenauigkeit

(0,16 mm oder 0,20 mm funktionieren ebenfalls, aber 0,12 mm liefert das beste Ergebnis)

- Support: Aus (nicht nötig)

- Wandlinien: 2

- Infill: 15 % Gyroid

- Material: PLA oder PETG

---

🇺🇸 Swissphone s.QUAD Stand for X15 / X35 / Voice / C35 / C45

This precisely designed stand is the ideal storage solution for your Swissphone s.QUAD pager. It is optimized to be printed without supports, ensuring clean surfaces with no post-processing needed.

#### ✅ Features

- Perfect fit: Tested with the actual housing – the pager sits firmly, doesn’t wobble, and can be removed easily.

- Universal compatibility with the s.QUAD series (same housing dimensions):

- Digital: s.QUAD X15, X35

- Analog: s.QUAD Voice

- Hybrid: s.QUAD C35, C45

- Support-free design: Geometry is optimized so no supports are required.

- Belt-clip friendly: Rear cutout provides enough room for the belt clip.

#### 🖨 Recommended print settings

- Layer height: 0.12 mm for maximum precision and fit

(0.16 mm or 0.20 mm are possible but 0.12 mm gives the best result)

- Support: Disabled (not needed)

- Walls: 2 perimeters

- Infill: 15 % gyroid

- Material: PLA or PETG

Tagi