Liczymy pasujące modele…
German: Dies ist die neue Version des bei mir seit einem Jahr sehr bewehrten selbstansaugenden Absaugaufsatz für das Bohren in Beton- oder Ziegelwänden im Wohnbereich für das Bosch-Professional click and clean System oder das Kärcher C35…
This is the male Bosch/Kärcher C35 adapter for a standard 32mm vacuum hose. Printorientation doesn't really matter. You should print a couple of spare clips. Sometimes you need to tweak it a lillte bit by scaling it in x and y by up to…
Just another vacuum adapter for the combination of GEX 12V/18V-125 with Boschˋs ClickˋnˋClean system or C35. Itˋs modified to fits stronger to ensure that the adapter can not release. Printed in PETG recommended. Itˋs a remix from…
A quick and dirty remix for the GKT 18V-52 GC to direct connect a dust extractor via C35. It‘s designed to fits into the L-BOXX. Printed in PETG with 15% infill and a Resolution of 0.15mm. Other settings should work as well.
This is a battery cap for an old Konica C35 film camera. It has a M15x1 thread size (roughly) and screws into the camera just like the original with no issues. The slot is made to fit an Australia 10c piece (~2mm wide, 23.5mm Diameter),…
Just a Wallmount for the Makita chainsaw DUC353. Print it in ABS or strong Material :-) Rate to support please THX
I used the predesigned connector von Boschlike over on Thingiverse: https://www.thingiverse.com/thing:4845838 Also the original uploadlink on Thiniverse is: https://www.thingiverse.com/thing:4862299 If you have a problem with loosing grip…
Ein stabiler Halter für die MAKITA Kettensäge DUC353. Ich empfehle die Akkus getrennt zu lagern, da gibt es gute Halter zum Download. Benötigte Schrauben: 4 - 4.5 mm, Senkkopf, Länge nach Bedarf Material: PLA Auflösung: 0.22 mm Kein…
My new improved Kärcher plug makes attatching the attatchment to your vaccum even easier
Festool D27 DM-AS/CT and osVac Neo M32/M40 adapters to Bosch C35. I modeled the adapter myself and tested it until it fits perfectly! Because of the grip surface you can easily remove the adapter. OsVac M40 and Festool D27 combi-adapter…
Prints very well standing on the GEX side. Pictures are in Sunlu PLA+ red. Printed on Elegoo Neptune 4 Pro Weight: 23 grams Nozzle: 0.4mm Layer Hight: 0.3mm Line Width: 0.4mm Wall Thickness: 0.8mm Infill: 10% Gyroid Time: 31m
This is a drop-in replacement for the original dust nozzle. You need to transfer the original o-ring to the new adapter. I advise to print the adapter with the C35 side facing downwards. It is possible, that this adapter also works with…
Konica c35 lens cap. It has a tight fit so depending on material and 3d-printer, you might need to fill it. There're 2 model files one with logo on cap and another without. Also added .f3d file, so you can offset face of inner diameter.
Dust extraction adapter for Triton TRA001 to C35
very easy to print heaphone holder, ideal to be stick with command strips size M. the most perfect fist layer for this is given by an ultrabase / glass printbed for the command strip to stick perfectly due to the shinny finish of the…
There are several models available for the QC35 headphones, but none that I saw have a vertical mount that I could use - so I made one. Maybe you can use it too. Does not need support, the bottom cutouts are at 45°. Shouldn't need a lot…
Additional clamp to connect the original model ( https://www.printables.com/model/820914-flexible-hose-for-dust-extraction ) to a Wabeco drill stand with 35mm diameter and outbound connection to Bosch C35 dust extraction system.
🇩🇪 Swissphone s.QUAD Ständer für X15 / X35 / Voice / C35 / C45 Dieser präzise konstruierte Ständer ist die ideale Ablage für deinen Swissphone s.QUAD Melder. Er ist so ausgelegt, dass er komplett ohne Support gedruckt werden kann – für…
A C35 dustextraction adapter for various Makita Sander with a dustport outerdiameter 22,5 mm.
This adapter just substitutes the original hose connection of the Lamello Zeta P2, so you can use the BOSCH click and clean hose. I printed it in ASA Prusament with 4 outer perimeters, 0.4mm nozzle, 0.2mm structural profile. Printing…
I created this C35 Adapter for my DeWalt D26204 based on the existing Makita RT0700 Adapter by chopping off the lower half and replacing that with my design. The newly added part looks a tiny bit shifted on Cura but is fine when printed.…
This is an advanced Drill Dust Collector with 2 different chambers. One for the vacuum to stick to the wall and one separate drill dust extractor to minimize dust sticking to the wall. It is required to put some foam around the separate…
A simple squared lens hood for the Konica C35, model tested on a C35 EF and ensure a snug tight fit, trimming possible
Nissan Laurel C35 as a 3D Model. This design can be scaled to any size in your slicer. Print flat with ~5% infill to save material. Perfect as decoration. Category: Signs & Logos
Printed without supports with 15 % infill 0.2mm layer PLA Unlike the original model, it does not contain holes for screws (I attached it with double sided tape)
It might only work with the 35mm hose that is part of the GAS35 kit (Bosch PN: 2608000566), as the inside geometry is kind of important with this design. The inside diameter of the BOSCH C35 connector should be something like 32mm, as…
It's a different action cam interface to better mount small action cam like the runcam Thumb Pro
I wanted to connect my Bosch C35 hose to my Kärcher vacuum cleaner, hence created this adapter. This allows to seamlessly connect to my Bosch Professional / Blue Powertools, e.g. my GKS saw. Printed in PETG with supports on printbed only,…
Deutsch: Staubsaugerdüse mit verbessertem Anschluss. Die Düse kann nun wesentlich einfacher aufgesteckt werden. Wenn Sie einen eigenen Adapter oder Aufsatz für das C35 System entwickeln wollen können sie gerne meinen C35 Anschluss, den…
Bouchon remplacement vissable pour Profile Design Bidon FC35
Dust Extractor C35 Adapter This C35 (Click & Clean) adapter for the Bosch TE 600 plunge base, makes it easy to use and connect your Bosch dust extractor (e. g. GAS 35, etc.). Print Recommendations: Setting Value Material PETG Layer Height…
Use original clip (also attached). slice with the clip section downwards (see pictures).
Based on the parameterized rugged box design from Whity I made this remix to fit 2x Dyson DC31 Batteries snuggly with a divider and a bit of a taper to slot them in. This is for my spare batteries for my old (but still going strong!)…
I didn't find vacuum adapter for my DRT50 clone with trasnparent rectangle holder, so i made one. i used m3 round head bolts and nyloc nuts. I didn't use supports for router mounts, it works, but isn't prettiest. Added step file for…
Adapter piece is mounted between the mounting peace at the handle bar and the part that holds the bottle, to level the bootle if the handle bar is angled. A thread insert (M4) per part is needed for the the additional needed screw. The…
i recommend printing this out of petg, print as oriented when importing the files into your slicer, the main adpater needs support. You can print a retaining ring from another click and clean model, or buy one from the bosch spare parts…
Je n'ai pas trouvé le nom exact de cette pièce... mais si vous l'avez perdu comme ma maman (allez savoir comment ??), voici mon fichier STL qui fonctionnera à merveille ! Je l'ai modélisé à partir de ma brosse DC35, et ça fonctionne aussi…
Adapter for dust extraction of Triton TSPS 650 (36mm outer diameter) for Bosch Click and Clean (C35)
Adapter for Mirka Deros to Bosch Click & Clean
Part of the trigger of my glue gun broke, so I made myself a replacement Print Settings Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.1 How I Designed This Calipers, photos and a ruler Category: Parts
Sometimes the Konica C35 ASA/ISO dial gets stuck. It can be very difficult to turn it by hand. I made this simple tool for me, and it works very well for my Konica C35 AF. Perhaps it will be useful to someone ?
I got tired of how the velcro constantly shook on my delanclip, so I designed this mount for the tracker. It slots in place and is removable. There is a clip that secures the clip to the top part of the headphones, but you can easily cut…
Enclosure for RC3563 Battery Tester / Milliohmmeter Available, among others, on AliExpress as “RC3563 Battery Voltage Internal Resistance Tester” or “RC3563 200Ω 100V Handheld Portable Battery Internal Resistance Voltage Tester.” The…
An angled mount for the Eufy C35 camera. this adapter bolts in using a 5/16-18 bolt. Then you can screw the Original Eufy mount included with your C35 camera. I used a #29 drill bit and 8-32 1/4 countersunk flathead screws for attaching…
I mixed both models to fit the C35 working tools, into the Casals JS102 (or compatible tools) I seems to work, due I get no complains of a friend who use it. This is an Remix/Mixure of these both models: -…
Print with 4 layers. Needs supports (all). First proof of concept with PLAr is working fine. So PETg(r) will follow. Just an example that the Prusaslicer is good enough to bypass CAD-Programms;-) With a little bit more further work it may…
I was repairing my headphones and lost the switch. Could not be bothered searching for it, Im sure the original will pop up. STL is not perfect but it works. I did file the top surface for smooth operation, I did shave off some of the…
I re-sized this this Bosch/Kärcher C35 adapter to better fit a Bosch Professional GDE 162. I used this size model for all my female dust adapters from now on.
A tool for turning the film sensitivity change ring for the Konica C35AF. You can easily change the film sensitivity even if the ring is stuck.
This adapter just slides onto the Shaper Origin. I have the older model. I don't know if the newer Shaper Origin has the same geometry. The fit is pretty tight, so you don't lose the hose. I printed it in ASA Prusament with 4 perimeters.
Aus Kostengründen habe ich einen Spitz C3542-05 Motor verbaut. Leider hat der einen Lochkreis von 25x19mm. Gedruckt habe ich es in ASA mir 3mm Stärke. Sollten heute beim Testflug 3mm nicht reichen, werde ich es auf 4mm erweitern.
Makita DV350Z hulpstuk. Grote beugel gaat om hals uitloop aanzuig deel. beugel houd de lange stofzuigerslang opgerold vast
Grunding RPC350 replacement power switch. Print lying on its side with supports enabled. It is dimensionally exactly like the original part, but the lever arm for the line to the powerbutton is reinforced, because the device failes…
This is a C35 adapter, that can be screwed onto something, for example if you want to do a diy dustbag like I did. The outer diameter of the screw is 45mm. For my DIY Dustbag I've used the Sebo Airbelt K , because I had them at hand. The…
Uses 4 M2 12mm hex socket screws to secure the lid. Print with snug normal supports.
The metal nut for the rewind knob started to slip, which gave me a hard time rewinding the film. Tried my best to replicate the original. No supports needed Printed default voron 0.2 0.15mm profile
Parkside PTSS 1200 B1 To C35 Bosch Female Adapter. I recommend using my remix of this adapter as i have resized using an actual Bosch tool.
karcher c35 fastener to regular 50mm
📸 Konica C35 Handgrip + Thumb Grip ✨ Function: Provides a secure one-handed hold, reduces camera shake, and prevents hand fatigue while shooting. ⚙ Design: Perfectly fits the Konica C35 body. Mounts easily via the top hot shoe and bottom…
Ryobi RCS18BL-0 18V ONE+ To C35 Bosch Female Adapter I recommend using my remix of this adapter as i have resized using an actual Bosch tool.
Makita M9204 125mm 5" 240v Electric Random Orbital Sander adapter to go to a C35 Bosch female adapter. I recommend using my remix of this adapter as i have resized using an actual Bosch tool.
Designed this to bolt on to an RV roof rack to be permanent. the stock mount would easily come off and not good for driving. Not restricted to RV use only. The mount does not block the view angle of the camera. I added a small cutout on…
Makita LS0815F Slide Compound Miter Saw To C35 Bosch Female Dust Collector Adapter I recommend using my remix of this adapter as i have resized using an actual Bosch tool.
Dust Extraction Cutting Guard HERZO To C35 Bosch Female Dust Collector Adapter. I recommend using my remix of this adapter as i have resized using an actual Bosch tool.
Jellas Orbital Sander 125MM To C35 Bosch Female Dust Collector Adapter. I recommend using my remix of this adapter as i have resized using an actual Bosch tool.
Replaces part number 901901 In an FC350 Type 3 Porter Cable framing nailer. Printed with 95a TPU, 999 Walls. Used in my own nailer. Fires like new.
My dad asked me if i could build a sparepart for his solar powered garden pond pump, i just had no idea how the parts looks like originally - so i only measured the pumps counterparts and build this model. unfortunately - i could not test…
Compatible with C220 - C350.
Samsung PS-CC350 Center Lautsperecher Halterung
🇩🇪 Swissphone s.QUAD Ständer für X15 / X35 / Voice / C35 / C45 Dieser präzise konstruierte Ständer ist die ideale Ablage für deinen Swissphone s.QUAD Melder. Er ist so ausgelegt, dass er komplett ohne Support gedruckt werden kann – für…
i recommend printing this out of petg, print as oriented when importing the files into your slicer, the main adpater needs support. You can print a retaining ring from another click and clean model, or buy one from the bosch spare parts…
Adapter for Mirka Deros to Bosch Click & Clean
Uses 4 M2 12mm hex socket screws to secure the lid. Print with snug normal supports.
Alternativer Monitor Ständer für z.B. Montage auf Holzplatte. Bohrungen für Senkkopfschrauben mit D=4mm. Print Settings Resolution: 0.3 Infill: 25 **Filament:** Eryone PETG Category: Computer
Samsung PS-CC350 Center Lautsperecher Halterung
An attachment for a Dyson DC-35 for a wide mouth attachment. Works well, just printed with PETG with circle side on bed, no supports required. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.3…
These two models covers the console and SFP ports on switch models C3560CX and C2960CX. This reduces the change that a endsuer uses the wrong port on the switch. The 3D print in the picture is printed with Bambu PETG gray + the first…
A replacement for DC35 tool clip, maybe more dysons but I can't confirm that. It is a bit of a pain to get to fit back in because the original peg holders are designed to flex in to snap, but my original 3d printed version snapped.…
I used OnShape to remix the clip attachment for my Bose headphone. You can edit it here: https://cad.onshape.com/documents/c173f552fd113de23724bfac/w/53afca30c4018844fb5f12d0/e/301fb3305e7c06a7c5feeac1 and make you own attachment. I used…
I needed new mounting rail for my BC35R. So here it is. BC30R rail doesnt fit BC35R, this one does Printed with Resin printer. Print Settings Printer: Phrozen Sonic Mini 4K Rafts: No Supports: No Resolution: 0.05 Infill: 100% Filament:…
replacement clip for DC35 hand held vacuum that holds the canister/battery side together. Printed with PETG.
Adapter for C35 (Click&Clean) to Bosch PHO3100 (and GHO). Fit on the outer side. May need 4 screws (3mm) to fix it real on the cone of the planer. In case printed with C35 on the top: No supports needed. Think about 3 or 4 outer layers.…
This is a VESA mount specifically designed for the Samsung LS27C350 monitor. I created this design to allow the monitor to be mounted on a standard VESA arm or stand, improving ergonomics and freeing up desk space. The mount has been…
